On Tue, Apr 15, 2008 at 12:36 PM, Eric B. ebenze@hotmail.com wrote:
Is there anything that works similarly for the iproute2 ruleset? I can't seem to find anything in /etc/init.d/network except for references to static routes using /sbin/route, which isn't good enough if one wants to use multiple routing tables. Nor can I find anything in /etc/init.d/ that would seem applicable to the iproute2 system.
You should put it in /etc/sysconfig/network-scripts/route-eth0 (change "eth0" to the name of the interface the routes apply to). For every line in this file, when the interface goes up, it will run "/sbin/ip route add $line" (see /etc/sysconfig/network-scripts/ifup-routes script if you want to understand exactly what it's doing).
Apparently there's also a new syntax for /etc/sysconfig/network-scripts/route-eth0, in which you specify several variables, the same you do in ifcfg-eth0, then you set something like:
ADDRESS0=1.2.3.0 NETMASK0=255.255.255.0 GATEWAY0=4.3.2.1
And then you go ADDRESS1, ADDRESS2, ..., as you need more routes.
There used to be a /etc/sysconfig/static-routes for this purpose but, as I understand, now the way to do it is per interface with the route-${ifname} files.
To test if your file is working, do a "service network restart" and check if the routes are up as expected. You can also do "ifdown eth0" and "ifup eth0" if you want to restart only one interface (for instance if you're remotely connected through another interface).
HTH, Filipe