On 2/16/07, Al Sparks data345@yahoo.com wrote:
Al Sparks spake the following on 2/15/2007 6:33 PM:
Al Sparks spake the following on 2/15/2007 4:44 PM:
One of the images (in Nahant) is to boot off the CD and install from the network.
That should work BUT I've only used it to get the entire ks file off the LAN. Booting from a CD is quick and easy (provided you have a CD drive as in this instance).
Probably the %include will work fairly easily if the original ks file's obtained via NFS; otherwise I suspect you'll need to do the mount; in %pre
How would I access the whole ks.cfg file on an nfs w/o dhcp?
That would be ideal. === Al
Assign an ip address during the boot process, and have everything referenced by ip address, instead of names.
At the boot prompt, I did the following:
linux ksdevice=eth0 ip=10.254.254.125 netmask=255.255.255.0 gateway=10.254.254.1 dns=10.1.1.21 ks=nfs:10.254.242.33:/vol/updts/staging/CentOS_4.3/ks.cfg
I get a blue screen with "Welcome to CentOS-4 i386" in the left upper corner, with the typical navigation key instructions at the bottom. It just hangs there.
I ping the IP address above, and get no pongs.
Suggestions? === Al
Dont you also need a method=nfs:nfs:10.254.242.33:/vol/updts/staging/CentOS_4.3/ for anaconda to get loaded? Just a guess as I haven't done any kickstart installs, so no flames if I'm talking out of my you know what!
I'm coming to the conclusion that RH, and by extension, CentOS just won't allow you to use a kickstart file over the network w/o DHCP.
I can and have used NFS as long as I place the kickstart file on the CD itself.
That's a pain.
First look at the debugging screens ALT-F3-> ALT-F6. Is the installer complaining. We mostly use kickstarts via HTTP so I havent tried NFS in a long while.
The ALT-F2 keys didn't seem to work, and it hung up the install, though I'm willing to try alternative suggestions. CTL-ALT-F2 does get me a shell prompt, if I do it during a pause.
What I've finally done is set up a vfat partition on the on the server itself. That way, when I do a clearpart --linux in the ks.cfg it doesn't bother that vfat.
Leaving the ks.cfg on there allows me to try different kickstart configurations with that server w/o having to make coasters each time.
Once I find kickstarts I like, I don't mind placing them on a CD.
Thanks for the help. Even though I didn't accomplish what I was originally looking for, I learned a lot trying everyone's suggestions. === Al