SORRY typo;
options bond0 mode=5 miimon=100
is really
options bond0 mode=4 miimon=100
On May 13, 2012, at 11:45 AM, aurfalien wrote:
Hi all,
Read many posts on the subject.
Using 802.3ad.
Few problems; Cannot ping some hosts on the network, they are all up. Cannot resolve via DNS which is one of the hosts that I cannot ping, internal nor external DNS hosts. Unplugging the NICS and plugging them back in will then not allow pining if the default d=gateway.
When cold booting it somewhat works, some hosts are pingable while others are not.
When restarting the network service via /etc/init.d/network, nothing is pingable.
Here are my configs;
ifcfg-bond0 DEVICE=bond0 USERCTL=no BOOTPROTO=none ONBOOT=yes IPADDR=10.0.0.10 NETMASK=255.255.0.0 NETWORK=10.0.0.0 TYPE=Unknown IPV6INIT=no
ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no
ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no
/etc/modprob.d/bonding.conf alias bond0 bonding options bond0 mode=5 miimon=100
Bonding worked great in Centos 5.x, not so well for me in Centos 6.2.
My goal is to get this working under bridging for KVM, I can only imagine the nightmare seeing I can't get a simple bond to work!
Any guidance is golden.
- aurf