So you're saying that your default gateway is an IP address that's part of a *different* network/subnet?
I don't know how this network has been designed, but typically I would expect that your default gateway would be something like
188.72.255.1
rather than 217.20.117.1 that you've mentioned earlier.
Take a look at mine for example:
[~]ifconfig eth0 Link encap:Ethernet HWaddr FE:FD:6D:4A:C1:69 inet addr:109.xx.xxx.105 Bcast:109.74.193.255 Mask:255.255.255.0 inet6 addr: fe80::fcfd:6dff:fe4a:c169/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:78742 errors:0 dropped:0 overruns:0 frame:0 TX packets:67114 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:35442733 (33.8 MiB) TX bytes:12607832 (12.0 MiB)
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8292 errors:0 dropped:0 overruns:0 frame:0 TX packets:8292 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1195297 (1.1 MiB) TX bytes:1195297 (1.1 MiB)
[~]netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 109.xx.xxx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 109.xx.xxx.1 0.0.0.0 UG 0 0 0 eth0
So you can see my host has .105 assigned to eth0, and the default gateway is .1 of the same network/subnet.
You might want to check that your addressing is correct.
On Mon, 29 Mar 2010, cahit Eyig?nl? wrote:
there is no problem with my internet connection i just want that to do this cent os automatically :route add default gw 217.20.117.1 before typing this my netstat -rn looks like this : root@lin3 [~]# netstat -rn (that is not able to connect to internet) Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 188.72.255.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 after adding gateway : (this works perfect) root@lin3 [~]# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 188.72.255.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 217.20.117.1 0.0.0.0 UG 0 0 0 eth0
i just want to add bold line automatically
and this is my ifconfig : root@lin3 [~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:83:21:44 inet addr:188.72.255.189 Bcast:188.72.255.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe83:2144/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9653 errors:0 dropped:0 overruns:0 frame:0 TX packets:458 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:876648 (856.1 KiB) TX bytes:50814 (49.6 KiB) Base address:0x2000 Memory:d8920000-d8940000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:483 errors:0 dropped:0 overruns:0 frame:0 TX packets:483 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:75305 (73.5 KiB) TX bytes:75305 (73.5 KiB)
sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
2010/3/29 Matt Iavarone matt.iavarone@gmail.com 2010/3/29 cahit Eyig?nl? cahit.eyigunlu@gmail.com:
This is my two line on route-eth0 address0=217.20.117.1 subnet0=255.255.255.255 but what should be next line for default gateway the only thing that i could not complete is default gateway setting and my netstat table must looklike this : Destination Gateway Genmask Flags MSS Window irtt Iface 217.20.117.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 xx.xx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 217.20.117.1 0.0.0.0 UG 0 0 0 eth0 and now i see only the first two line truely i am adding 3rd line on every time restart manually with route add default gw
2010/3/29 Les Mikesell lesmikesell@gmail.com
cahit Eyig?nl? wrote:
i am reaching the network with this : route add -net 217.20.117.1 netmask 255.255.255.255 dev eth0 route add default gw 217.20.117.1
i have added eth0 address0=217.20.117.1 subnet0=255.255.255.255
the first command is ok but how could i set the second command to cent os to do it automatically
If you create a file named /etc/sysconfig/network-scripts/route-eth0 you can put lines in it that will have 'ip route' added at the beginning and executed after the interface is up. "ip route" takes some different arguments than the "route" command - see "man ip" for details.
-- Les Mikesell lesmikesell@gmail.com
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why don't you post the results of 'ifconfig -a' and 'ip route show'? Giving information piecemeal is not helping anyone. _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos