Having done my fresh 5.0 install a couple months ago I'm slowly getting things back in to working condition. Decided last night to try setting up lmsensors.
Got it all set up (modules, etc taken care of) and it runs and reports values, but some of 'em a clearly wrong with the default sensors.conf Trying to use the old sensors.conf I used on Centos 4 produces even more whacked-out results, so I guess that's not the solution.
Perusing the documentation, it seems that one can configure it properly only if one knows a lot more about the hardware than one typically knows.
So, I'm wondering if anyone out there has a working config file for a Gigabyte GA-7N400 Pro2 motherboard that works on Centos 5.1?
here's what I get with it as it stands right now:
it8712-isa-0290 Adapter: ISA adapter VCore 1: +1.68 V (min = +1.42 V, max = +1.57 V) ALARM VCore 2: +2.54 V (min = +2.40 V, max = +2.61 V) +3.3V: +3.23 V (min = +3.14 V, max = +3.47 V) +5V: +4.99 V (min = +4.74 V, max = +5.25 V) +12V: +11.90 V (min = +11.39 V, max = +12.61 V) -12V: -15.70 V (min = -12.63 V, max = -11.41 V) ALARM -5V: -8.10 V (min = -5.26 V, max = -4.77 V) ALARM Stdby: +4.57 V (min = +4.76 V, max = +5.24 V) ALARM VBat: +4.08 V fan1: 2556 RPM (min = 0 RPM, div = 8) fan2: 2083 RPM (min = 3013 RPM, div = 8) ALARM fan3: 1591 RPM (min = 3013 RPM, div = 8) ALARM M/B Temp: +30°C (low = +15°C, high = +40°C) sensor = thermistor CPU Temp: +26°C (low = +15°C, high = +45°C) sensor = thermistor Temp3: +57°C (low = +15°C, high = +45°C) sensor = diode
That -12v at -15.70 is pretty obviously wrong, as is the -5 at -8.10, and the other voltages getting ALARMs are probably wrong too, though not by as much.
The MB and CPU temps shown by the BIOS are 29 and 53, so that 26 shown as CPU temp here is likely bogus. One wonders if the Temp3 is actually the CPU temp instead. (my old config used Temp2 for that, tho).
Advice will be appreciated. Thanks!