On 3 October 2017 at 13:01, hw hw@adminart.net wrote:
Stephen John Smoogen smooge@gmail.com writes:
On 1 October 2017 at 11:34, hw hw@adminart.net wrote:
Hi,
is there a way in Centos to find out if the Intel turbo mode will be used?
Using the 'stress' utility and checking the frequency with cpupower tells me that a CPU is running at it´s maximum frequency as reported by cpupower --- and this frequency is less than the frequency it would run at if it used the turbo mode. All the other CPUs are at their minimum frequency. I have verified that turbo mode is enabled in the BIOS.
Is cpupower unable to report frequencies used in turbo mode despite it always says it gets its information from the hardware?
It would seem that there are multiple ways to get the information you are looking for. I expect you have seen this already
https://haypo.github.io/intel-cpus.html
but I figured I would pass it on for others. They found that cpupower is less reliable in how it reports the data because of the values it gets them from.
Thanks, I didn´t see that one yet. At least I noticed that cpupower says that turbo mode is available, and turbostat seems to indicate that CPUs sometimes run at higher frequencies like they would when in turbo mode.
It´s strange that there is no tool to definitely figure this out, especially since RH seems to have done a lot of research into improving performance.
My limited understanding is that it isn't very reliable to show it and the Windows ones distort reality a lot (aka say you are in it when you aren't actually in it) because they do a moving average to show what is going on so it doesn't look as jagged as it really is. It is also not all that useful for general software needs. The CPU is going to be waiting a lot longer now for memory and io to catch up for most transactions.