On Tue, Oct 19, 2010 at 07:34:19PM -0700, Nataraj wrote:
fred smith wrote:helppain/backups/disks/
hi all!
back in Aug several of you assisted me in solving a problem where one of my drives had dropped out of (or been kicked out of) the raid1 array.
something vaguely similar appears to have happened just a few mins ago, upon rebooting after a small update. I received four emails like this, one for /dev/md0, one for /dev/md1, one for /dev/md125 and one for /dev/md126:
Subject: DegradedArray event on /dev/md125:fcshome.stoneham.ma.us X-Spambayes-Classification: unsure; 0.24 Status: RO Content-Length: 564 Lines: 23
This is an automatically generated mail message from mdadm running on fcshome.stoneham.ma.us
A DegradedArray event had been detected on md device /dev/md125.
Faithfully yours, etc.resources/
P.S. The /proc/mdstat file currently contains the following:
Personalities : [raid1] md0 : active raid1 sda1[0] 104320 blocks [2/1] [U_]
md126 : active raid1 sdb1[1] 104320 blocks [2/1] [_U]
md125 : active raid1 sdb2[1] 312464128 blocks [2/1] [_U]
md1 : active raid1 sda2[0] 312464128 blocks [2/1] [U_]
unused devices: <none>
firstly, what the heck are md125 and md126? previously there was only md0 and md1.... ????
secondly, I'm not sure what it's trying to tell me. it says there was a "degradedarray event" but at the bottom it says there are no unused devices.
there are also some messages in /var/log/messages from the time of the boot earlier today, but they do NOT say anything about "kicking out" any of the md member devices (as they did in the event back in August):
Oct 19 18:29:41 fcshome kernel: device-mapper: dm-raid45: initialized v0.2594l Oct 19 18:29:41 fcshome kernel: md: Autodetecting RAID arrays. Oct 19 18:29:41 fcshome kernel: md: autorun ... Oct 19 18:29:41 fcshome kernel: md: considering sdb2 ... Oct 19 18:29:41 fcshome kernel: md: adding sdb2 ... Oct 19 18:29:41 fcshome kernel: md: sdb1 has different UUID to sdb2 Oct 19 18:29:41 fcshome kernel: md: sda2 has same UUID but different superblock to sdb2 Oct 19 18:29:41 fcshome kernel: md: sda1 has different UUID to sdb2 Oct 19 18:29:41 fcshome kernel: md: created md125 Oct 19 18:29:41 fcshome kernel: md: bind<sdb2> Oct 19 18:29:41 fcshome kernel: md: running: <sdb2> Oct 19 18:29:41 fcshome kernel: raid1: raid set md125 active with 1 out of 2 mir rors Oct 19 18:29:41 fcshome kernel: md: considering sdb1 ... Oct 19 18:29:41 fcshome kernel: md: adding sdb1 ... Oct 19 18:29:41 fcshome kernel: md: sda2 has different UUID to sdb1 Oct 19 18:29:41 fcshome kernel: md: sda1 has same UUID but different superblock to sdb1 Oct 19 18:29:41 fcshome kernel: md: created md126 Oct 19 18:29:41 fcshome kernel: md: bind<sdb1> Oct 19 18:29:41 fcshome kernel: md: running: <sdb1> Oct 19 18:29:41 fcshome kernel: raid1: raid set md126 active with 1 out of 2 mirrors Oct 19 18:29:41 fcshome kernel: md: considering sda2 ... Oct 19 18:29:41 fcshome kernel: md: adding sda2 ... Oct 19 18:29:41 fcshome kernel: md: sda1 has different UUID to sda2 Oct 19 18:29:41 fcshome kernel: md: created md1 Oct 19 18:29:41 fcshome kernel: md: bind<sda2> Oct 19 18:29:41 fcshome kernel: md: running: <sda2> Oct 19 18:29:41 fcshome kernel: raid1: raid set md1 active with 1 out of 2 mirrors Oct 19 18:29:41 fcshome kernel: md: considering sda1 ... Oct 19 18:29:41 fcshome kernel: md: adding sda1 ... Oct 19 18:29:41 fcshome kernel: md: created md0 Oct 19 18:29:41 fcshome kernel: md: bind<sda1> Oct 19 18:29:41 fcshome kernel: md: running: <sda1> Oct 19 18:29:41 fcshome kernel: raid1: raid set md0 active with 1 out of 2 mirrors Oct 19 18:29:41 fcshome kernel: md: ... autorun DONE.
and here's /etc/mdadm.conf:
# cat /etc/mdadm.conf
# mdadm.conf written out by anaconda DEVICE partitions MAILADDR fredex ARRAY /dev/md0 level=raid1 num-devices=2 uuid=4eb13e45:b5228982:f03cd503:f935bd69 ARRAY /dev/md1 level=raid1 num-devices=2 uuid=5c79b138:e36d4286:df9cf6f6:62ae1f12
which doesn't say anything about md125 or md126,... might they be some kind of detritus or fragments left over from whatever kind of failure caused the array to become degraded?
do ya suppose a boot from power-off might somehow give it a whack upside the head so it'll reassemble itself according to mdadm.conf?
I'm not sure which devices need to be failed and re-added to make it clean again (which is all I had to do when I had the aforementioned earlier problem.)
Thanks in advance for any advice!
Fred
I've seen this kind of thing happen when the autodetection stuff misbehaves. I'm not sure why it does this or how to prevent it. Anyway, to recover, I would use something like:
mdadm --stop /dev/md125 mdadm --stop /dev/md126
If for some reason the above commands fail, check and make sure it has not automounted the file systems from md125 and md126. Hopefully this won't happen.
Then use: mdadm /dev/md0 -a /dev/sdXX To add back the drive which belongs in md0, and similar for md1. In general, it won't let you add the wrong drive, but if you want to check use: mdadm --examine /dev/sda1 | grep UUID and so forth for all your drives and find the ones with the same UUID.
Well, I've already tried to use --fail and --remove on md125 and md126 but I'm told the members are still active.
mdadm /dev/md126 --fail /dev/sdb1 --remove /dev/sdb1 mdadm /dev/md125 --fail /dev/sdb2 --remove /dev/sdb2
mdadm /dev/md126 --fail /dev/sdb1 --remove /dev/sdb1 mdadm: set /dev/sdb1 faulty in /dev/md126 mdadm: hot remove failed for /dev/sdb1: Device or resource busy
with the intention of then re-adding them to md0 and md1.
so I tried:
mdadm /dev/md0 --fail /dev/sda1 --remove /dev/sda1 and got a similar message.
at which point I knew I was in over my head.
When I create my Raid arrays, I always use the option --bitmap=internal. With this option set, a bitmap is used to keep track of which pages on the drive are out of date and then you only resync pages which need updating instead of recopying the whole drive when this happens. In the past I once added a bitmap to an existing raid1 array using something like this. This may not be the exact command, but I know it can be done: mdadm /dev/mdN --bitmap=internal
Adding the bitmap is very worthwhile and saves time and risk of data loss by not having to recopy the whole partition.
Nataraj _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos