Peter Kjellstrom wrote:
On Monday 15 October 2007, Dan Carl wrote: ...
But with errors In dmesg have this: sda: Mode Sense: bf 00 00 08 SCSI device sda: drive cache: write back sda: unknown partition table sd 0:0:0:0: Attached scsi disk sda
Those are not errors. But it doesn't seem to have a partition table (see below)
I have no experience with the Smart Array Controller, just what I read the past couple of days. Here's how it was mounted on the HP server /dev/cciss/c0d1 /stor02 ext3 defaults 1 1
Ah, they put the ext3 directly on the device. Consistent with the above data.
Is there a way I can get the data off the array with my Centos server? Any help/suggestions/tips would be greatly appreciated, I've hit a brick wall.
Try "mount -oro /dev/sda /mnt/tmp" (or whatever) or just see if there's a superblock there with "tune2fs -l /dev/sda".
he has a hardware raid set of drives originally from a HP/Compaq SmartArray controller, now connected to a simple non-raid scsi controller. sorry, thats not gonna play no way no how.