I dont have a graphical desktop installed.
On Wed, Apr 10, 2013 at 11:09 AM, Les Mikesell lesmikesell@gmail.comwrote:
On Wed, Apr 10, 2013 at 11:54 AM, Jason T. Slack-Moehrle slackmoehrle@gmail.com wrote:
I have a Drobo, connected to a CentOS 6.4 box. The box sees it as
/dev/sdg.
# parted GNU Parted 2.1 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sdg Using /dev/sdg (parted) print Model: DROBO DroboPro (scsi) Disk /dev/sdg: 17.6TB Sector size (logical/physical): 512B/512B Partition Table: gpt
Number Start End Size File system Name Flags
(parted)
and looking at an example of creating a partition: (parted) mkpart
primary
106 16179
I dont know what to do next since I dont see any partitions listed. I
dont
know what do to for the start and end point, although the man page says "size in MB". Do I just say 0 to (and convert 16.0TB to MB? Yes, I know
it
says 17.6 TB but this model drobo can only support partitions up to 16tb without making a second partition.
Can anyone provide some advice on that I am missing conceptually?
If you have a GUI desktop installed you can install the gparted package from EPEL. It is easier to use than raw parted and mkfs.
-- Les Mikesell lesmikesell@gmail.com _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos