On 2/16/2016 3:23 PM, Zube wrote:
Does anyone know what program can be used to query the RAID status from the OS for an on-board LSI SAS 2308-4i?
the 2308 isn't actually a megaraid, its a simple SAS HBA that has an optional raid mode IF its flashed with IR firmware... this only supports raid 0/1/10. I always(!) flash these with the IT firmware that turns them back into a plain SAS HBA, and then use operating system native raid (mdraid for centos).
the megaraid management software does support these chips in IR mode, but megacli is an awful thing to use. i found it so awful that I located and tweaked a couple python scripts to make it easier to use on a LSI MegaRAID 9261-8i (which doesn't /have/ any IT mode)
# lsi-raidinfo -- Controllers -- -- ID | Model c0 | LSI MegaRAID SAS 9261-8i
-- Volumes -- -- ID | Type | Size | Status | InProgress volume c0u0 | RAID10 1x2 | 2727G | Optimal | None volume c0u1 | RAID60 1x8 | 16370G | Optimal | None volume c0u2 | RAID60 1x8 | 16370G | Optimal | None
-- Disks -- -- Encl:Slot | vol-span-unit | Model | Status disk 8:0 | 0-0-0 | Z291VTS5ST33000650NS 0003 | Online, Spun Up disk 8:1 | 0-0-1 | Z291VTRPST33000650NS 0003 | Online, Spun Up disk 8:2 | 1-0-0 | Z291VTKWST33000650NS 0003 | Online, Spun Up disk 8:3 | 1-0-1 | Z291VT9YST33000650NS 0003 | Online, Spun Up disk 8:4 | 1-0-2 | Z291VTT6ST33000650NS 0003 | Online, Spun Up disk 8:5 | 1-0-3 | Z291VT6CST33000650NS 0003 | Online, Spun Up disk 8:6 | 1-0-4 | Z291VTLAST33000650NS 0003 | Online, Spun Up disk 8:7 | 1-0-5 | Z291VTK1ST33000650NS 0003 | Online, Spun Up disk 8:8 | 1-0-6 | Z291VTNGST33000650NS 0003 | Online, Spun Up disk 8:9 | 1-0-7 | Z291VTRAST33000650NS 0003 | Online, Spun Up disk 8:10 | 2-0-0 | Z291VV05ST33000650NS 0003 | Online, Spun Up disk 8:11 | 2-0-1 | Z291VTW1ST33000650NS 0003 | Online, Spun Up disk 8:12 | 2-0-2 | Z291VTRLST33000650NS 0003 | Online, Spun Up disk 8:13 | 2-0-3 | Z291VTRXST33000650NS 0003 | Online, Spun Up disk 8:14 | 2-0-4 | Z291VSZGST33000650NS 0003 | Online, Spun Up disk 8:15 | 2-0-5 | Z291VSW1ST33000650NS 0003 | Online, Spun Up disk 8:16 | 2-0-6 | Z291VTB5ST33000650NS 0003 | Online, Spun Up disk 8:17 | 2-0-7 | Z291VSX8ST33000650NS 0003 | Online, Spun Up disk 8:18 | x-x-x | Z291VTS7ST33000650NS 0003 | Hotspare, Spun down disk 8:19 | x-x-x | Z291VT3HST33000650NS 0003 | Hotspare, Spun down
the script that does this is here...
# more bin/lsi-raidinfo #!/usr/bin/python
# megaclisas-status 0.6 # renamed lsi-raidinfo # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with Pulse 2; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301, USA. # # Copyright (C) 2007-2009 Adam Cecile (Le_Vert)
## modified by johnpuskar@gmail.com 08/14/11 # fixed for LSI 9285-8e on Openfiler
## modified by pierce@hogranch.com 2012-01-05 # fixed for newer version of megacli output on RHEL6/CentOS6 # output format extended to show raid span-unit and rebuild % complete
import os import re import sys
if len(sys.argv) > 2: print 'Usage: lsi-raidinfo [-d]' sys.exit(1)
# if argument -d, only print disk info printarray = True printcontroller = True if len(sys.argv) > 1: if sys.argv[1] == '-d': printarray = False printcontroller = False else: print 'Usage: lsi-raidinfo [-d]' sys.exit(1)
# Get command output def getOutput(cmd): output = os.popen(cmd) lines = [] for line in output: if not re.match(r'^$',line.strip()): lines.append(line.strip()) return lines
def returnControllerNumber(output): for line in output: if re.match(r'^Controller Count.*$',line.strip()): return int(line.split(':')[1].strip().strip('.'))
def returnControllerModel(output): for line in output: if re.match(r'^Product Name.*$',line.strip()): return line.split(':')[1].strip()
def returnArrayNumber(output): i = 0 for line in output: if re.match(r'^Virtual (Drive|Disk).*$',line.strip()): i += 1 return i
def returnArrayInfo(output,controllerid,arrayid): id = 'c'+str(controllerid)+'u'+str(arrayid) # print 'DEBUG: id = '+str(id) operationlinennumber = False linenumber = 0 units = 1 type = 'JBOD' span = 0 size = 0 for line in output: if re.match(r'^RAID Level.*$',line.strip()): type = line.strip().split(':')[1].strip() type = 'RAID' + type.split(',')[0].split('-')[1].strip() # print 'debug: type = '+str(type) if re.match(r'^Number.*$',line.strip()): units = line.strip().split(':')[1].strip() if re.match(r'^Span Depth.*$',line.strip()): span = line.strip().split(':')[1].strip() if re.match(r'^Size.*$',line.strip()): # Size reported in MB if re.match(r'^.*MB$',line.strip().split(':')[1]): size = line.strip().split(':')[1].strip('MB').strip() size = str(int(round((float(size) / 1000))))+'G' # Size reported in TB elif re.match(r'^.*TB$',line.strip().split(':')[1]): size = line.strip().split(':')[1].strip('TB').strip() size = str(int(round((float(size) * 1000))))+'G' # Size reported in GB (default) else: size = line.strip().split(':')[1].strip('GB').strip() size = str(int(round((float(size)))))+'G' if re.match(r'^State.*$',line.strip()): state = line.strip().split(':')[1].strip() if re.match(r'^Ongoing Progresses.*$',line.strip()): operationlinennumber = linenumber linenumber += 1 if operationlinennumber: inprogress = output[operationlinennumber+1] else: inprogress = 'None' if span > 1: type = type+'0' type = type + ' ' + str(span) + 'x' + str(units) return [id,type,size,state,inprogress]
def returnDiskInfo(output,controllerid,currentarrayid): arrayid = False oldarrayid = False olddiskid = False table = [] state = 'Offline' model = 'Unknown' enclnum = 'Unknown' slotnum = 'Unknown' enclsl = 'Unknown'
firstDisk = True for line in output: if re.match(r'Firmware state: .*$',line.strip()): state = line.split(':')[1].strip() if re.match(r'Rebuild',state): cmd2 = '/opt/MegaRAID/MegaCli/MegaCli64 pdrbld showprog physdrv['+str(enclnum)+':'+str(slotnum)+'] a'+str(controllerid)+' nolog' ll = getOutput(cmd2) state += ' completed ' + re.sub(r'Rebuild Progress.*Completed', '', ll[0]).strip(); if re.match(r'Slot Number: .*$',line.strip()): slotnum = line.split(':')[1].strip() if re.match(r'Inquiry Data: .*$',line.strip()): model = line.split(':')[1].strip() model = re.sub(' +', ' ', model) model = re.sub('Hotspare Information', '', model).strip() #remove bogus output from firmware 12.12 if re.match(r"(Drive|Disk)'s postion: .*$",line.strip()): spans = line.split(',') span = re.sub(r"(Drive|Disk).*DiskGroup:", '', spans[0]).strip()+'-' span += spans[1].split(':')[1].strip()+'-' span += spans[2].split(':')[1].strip() if re.match(r'Enclosure Device ID: [0-9]+$',line.strip()): if firstDisk == True: firstDisk = False else: enclsl = str(enclnum)+':'+str(slotnum) table.append([str(enclsl), span, model, state]) span = 'x-x-x' enclnum = line.split(':')[1].strip() # Last disk of last array enclsl = str(enclnum)+':'+str(slotnum) table.append([str(enclsl), span, model, state]) arraytable = [] for disk in table: arraytable.append(disk) return arraytable
cmd = '/opt/MegaRAID/MegaCli/MegaCli64 adpcount nolog' output = getOutput(cmd) controllernumber = returnControllerNumber(output)
bad = False
# List available controller if printcontroller: print '-- Controllers --' print '-- ID | Model' controllerid = 0 while controllerid < controllernumber: cmd = '/opt/MegaRAID/MegaCli/MegaCli64 adpallinfo a'+str(controllerid)+' nolog' output = getOutput(cmd) controllermodel = returnControllerModel(output) print 'c'+str(controllerid)+' | '+controllermodel controllerid += 1 print ''
if printarray: controllerid = 0 print '-- Volumes --' print '-- ID | Type | Size | Status | InProgress' # print 'controller number'+str(controllernumber) while controllerid < controllernumber: arrayid = 0 cmd = '/opt/MegaRAID/MegaCli/MegaCli64 ldinfo lall a'+str(controllerid)+' nolog' output = getOutput(cmd) arraynumber = returnArrayNumber(output) # print 'array number'+str(arraynumber) while arrayid < arraynumber: cmd = '/opt/MegaRAID/MegaCli/MegaCli64 ldinfo l'+str(arrayid)+' a'+str(controllerid)+' nolog' # print 'DEBUG: running '+str(cmd) output = getOutput(cmd) # print 'DEBUG: output '+str(output) arrayinfo = returnArrayInfo(output,controllerid,arrayid) print 'volume '+arrayinfo[0]+' | '+arrayinfo[1]+' | '+arrayinfo[2]+' | '+arrayinfo[3]+' | '+arrayinfo[4] if not arrayinfo[3] == 'Optimal': bad = True arrayid += 1 controllerid += 1 print ''
print '-- Disks --' print '-- Encl:Slot | vol-span-unit | Model | Status'
controllerid = 0 while controllerid < controllernumber: arrayid = 0 cmd = '/opt/MegaRAID/MegaCli/MegaCli64 ldinfo lall a'+str(controllerid)+' nolog' output = getOutput(cmd) arraynumber = returnArrayNumber(output) while arrayid<arraynumber: #grab disk arrayId info cmd = '/opt/MegaRAID/MegaCli/MegaCli64 pdlist a'+str(controllerid)+' nolog' #print 'debug: running '+str(cmd) output = getOutput(cmd) arraydisk = returnDiskInfo(output,controllerid,arrayid)
for array in arraydisk: print 'disk '+array[0]+' | '+array[1]+' | '+array[2]+' | '+array[3] arrayid += 1 controllerid += 1
if bad: print '\nThere is at least one disk/array in a NOT OPTIMAL state.' sys.exit(1)