Hi,
It works, but, it didn't create "virtual address" aka "eth0:0", try using "ip" command: "ip addr show dev eth0"
Att.,
Antonio.
2016-09-04 14:27 GMT-03:00 Walter H. Walter.H@mathemainzel.info:
On 04.09.2016 17:33, Ulf Volmer wrote:
OK, some testing has been done. you have to specify
IPADDR=192.168.0.10 NETMASK=255.255.255.0 NETWORK=192.168.0.0 GATEWAY=192.168.0.1 IPADDR2=192.168.2.10 NETMASK2=255.255.255.0 NETWORK2=192.168.2.0
I tried this way; but 'ifconfig' doesn't show these additional addresses ...
please note, that you have to specify only one GATEWAY, there can be
only one default gateway active.
sure? thought that IPADDR, GATEWAY, NETMASK and NETWORK must go with, the same with IPADDR2, GATEWAY2, NETMASK2 and NETWORK2 ...
Walter
CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos