Hello all
I have weird problem i can't understand and don't know where to look.
[root@chamber ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether bc:ae:c5:02:c7:dc brd ff:ff:ff:ff:ff:ff inet 10.0.0.200/24 brd 10.0.0.255 scope global noprefixroute enp1s0 valid_lft forever preferred_lft forever inet6 fe80::beae:c5ff:fe02:c7dc/64 scope link noprefixroute valid_lft forever preferred_lft forever 3: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether c0:4a:00:03:bc:3e brd ff:ff:ff:ff:ff:ff inet 10.0.49.1/25 brd 10.0.49.127 scope global noprefixroute enp3s0 valid_lft forever preferred_lft forever inet6 fe80::6b5a:6660:981b:7b84/64 scope link noprefixroute valid_lft forever preferred_lft forever
[root@chamber ~]# ip route default via 10.0.0.1 dev enp1s0 proto static metric 100 10.0.0.0/24 dev enp1s0 proto kernel scope link src 10.0.0.200 metric 100 10.0.49.0/25 dev enp3s0 proto kernel scope link src 10.0.49.1 metric 101
[root@chamber ~]# firewall-cmd --list-all --zone=home home (active) target: default icmp-block-inversion: no interfaces: enp3s0 sources: services: mdns samba http ipp-client dhcpv6-client vnc-server nfs dns dhcp imaps samba-client tftp smtp ports: 143/tcp 5666/tcp 26666/tcp protocols: masquerade: no forward-ports: source-ports: icmp-blocks: rich rules:
root@chamber ~]# firewall-cmd --list-all --zone=external external (active) target: default icmp-block-inversion: no interfaces: enp1s0 sources: services: ssh http ports: protocols: masquerade: yes forward-ports: source-ports: icmp-blocks: rich rules:
There is nginx on port 80. I've turned off SELinux for testing purposes.
[root@chamber ~]# nmap chamber -p80 [...] PORT STATE SERVICE 80/tcp open http
[root@chamber ~]# nmap -p80 chmura.<domain> [...] PORT STATE SERVICE 80/tcp closed http
Same for any host within network (chamber is router).
chmura.<domain>'s IP is public IP of chamber (well sort of - it's IP of ISP's router mounted on my chimney - it's WiMax or something like this). All ports are redirected to chamber (port 80 for sure).
When i'm checking from network outside of mine, port is open and everything works as expected. I'm puzzled - really don't know what is happening. Any suggestions?