Joseph L. Casale wrote:
How does one do this? For example:
# lspci | grep USB
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
and
# lsusb
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 004 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 007 Device 001: ID 0000:0000
Bus 008 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 006 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
I thought an lspci –tv would help, but it doesn’t show the UPS?
the UPS isn't a PCI device. the USB channels on the motherboard are, however, thats what you see.
...
So how do I know which controller has this device on it so I can enumerate the PCI ID of that controller?
the UPS doesn't HAVE a PCI ID, its not on PCI, its on USB. "Buss 001" means its on USB Controller 1, which is PCI ID (bus:slot.func): 00:1d.0 Use lspci -vn if you want to see the vendor/device codes are for 00:1d.0 (probably be 8086:xxxx) instead of the symbolic names shown above.
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) ____-> Bus 001 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply