Hey guys,
I'm trying to install keepalived 1.2.19 on a centos 6.5 machine. I did an install from source.
And when I start keepalived this is what I'm seeing in the logs. It's reporting that the VRRP_Instance(VI_1) Now in FAULT state.
Here's more of that log entry:
Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: VRRP Instance = VI_1 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Using VRRPv2 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Want State = MASTER Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Runing on device = eth1 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Gratuitous ARP repeat = 5 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Gratuitous ARP refresh repeat = 1 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Virtual Router ID = 51 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Priority = 101 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Advert interval = 1 sec Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Accept disabled Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Virtual IP = 1 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: 10.40.116.34/32 dev eth1 scope global Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: Using LinkWatch kernel netlink reflector... Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_vrrp[44943]: VRRP sockpool: [ifindex(3), proto(112), unicast(0), fd(10,11)] Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_healthcheckers[44942]: ------< Global definitions >------ Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_healthcheckers[44942]: Router ID = USECLSNDMNRDBA Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_healthcheckers[44942]: VRRP IPv4 mcast group = 224.0.0.18 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_healthcheckers[44942]: VRRP IPv6 mcast group = ff02::12 Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_healthcheckers[44942]: ------< SSL definitions >------ Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_healthcheckers[44942]: Using autogen SSL context Sep 29 12:06:58 USECLSNDMNRDBA Keepalived_healthcheckers[44942]: Using LinkWatch kernel netlink reflector... *Sep 29 12:06:59 USECLSNDMNRDBA Keepalived_vrrp[44943]: Kernel is reporting: interface eth1 DOWN* *Sep 29 12:06:59 USECLSNDMNRDBA Keepalived_vrrp[44943]: VRRP_Instance(VI_1) Now in FAULT state*
And if I do an ifconfig command I see no evidence of an eth1 existing. Also I can't ping the virtual address that I'm trying to create:
# ping -c 5 10.40.116.34 PING 10.40.116.34 (10.40.116.34) 56(84) bytes of data.
From 10.40.116.30 icmp_seq=2 Destination Host Unreachable From 10.40.116.30 icmp_seq=3 Destination Host Unreachable From 10.40.116.30 icmp_seq=4 Destination Host Unreachable From 10.40.116.30 icmp_seq=5 Destination Host Unreachable
--- 10.40.116.34 ping statistics --- 5 packets transmitted, 0 received, +4 errors, 100% packet loss, time 14001ms pipe 3
Here are my configs starting with the first machine:
# cat keepalived.conf vrrp_instance VI_1 { interface eth1 state MASTER virtual_router_id 51 priority 101 # 101 on master, 100 on backup
vrrp_unicast_bind 10.40.116.30 # Internal IP of this machine vrrp_unicast_peer 10.40.116.31 # Internal IP of peer virtual_ipaddress { 10.40.116.34 }
And here's the config on the second machine:
# cat /etc/keepalived/keepalived.conf vrrp_instance VI_1 { interface eth1 state MASTER virtual_router_id 51 priority 100 # 101 on master, 100 on backup vrrp_unicast_bind 10.40.116.31 # Internal IP of this machine vrrp_unicast_peer 10.40.116.30 # Internal IP of peer virtual_ipaddress { 10.40.116.34 }
Does anyone have any experience in solving this kind of problem? Any suggestions on how to resolve this would be great.
Thanks, Tim