Iulian Badea wrote:
Hello all,
I have 2 x 250GB sata disks (sda and sdb).
# fdisk -l /dev/sda
Disk /dev/sda: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 14939 119997486 fd Linux raid autodetect /dev/sda2 14940 29878 119997517+ fd Linux raid autodetect /dev/sda3 29879 30400 4192965 fd Linux raid autodetect
# fdisk -l /dev/sdb
Disk /dev/sdb: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sdb1 * 1 522 4192933+ fd Linux raid autodetect
# cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb1[1] sda3[0] 4192832 blocks [2/2] [UU]
md1 : active raid1 sda2[1] sda1[0] 119997376 blocks [2/2] [UU]
What I want to do:
- have on each disk 2 partitions (4gb for swap and the 200gb+ the rest for
/)
- raid 1 between them
This is what I wanted in the beginning, but...I didn't paid attention...
What can I do to rebuild it to my needs (without loosing data or reformatting)?
Thanks
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
I don't know if you are going to keep lvm or not but here is a howto: http://www.howtoforge.com/set-up-raid1-on-a-running-lvm-system-fedora8
Also just search for "raid1" on that website and you can find more stuff.
Sam