@ john et al
ei tnx guys i tried john's syntax and it work :)
@peter anyway the second one(where the snat is) why i put it in the script because i thought i need to send back the packets to the firewall so the firewall will send it back to the sender. But when i tired john's syntax it sends back without the snat syntax. why is that?
On 5/19/05, Peter Farrow peter@farrows.org wrote:
If you are doing it like this as you have indicated,
iptables -t nat -A PREROUTING -d xxx.xxx.xxx.xxx -p tcp -j DNAT --to-destination 10.0.0.1
iptables -t nat -A POSTROUTING -d 10.0.0.1 -j SNAT --to xxx.xxx.xxx.xxx
Then thats why your mail server logs the ip address of the firewall.... because of the POSTROUTING line above and the fact that you DNAT'ed to an ipaddress that you then SNAT'ed out onto the LAN.
Its no problem and expected that your mail server has a different IP to your firewall, in this case you will need to make sure that the. packets you've destination NAT'ed are allowed through the forward chain as Johnny Hughes has indicated below.
P.
Johnny Hughes wrote:
On Thu, 2005-05-19 at 21:44 +0800, Mark Quitoriano wrote:
here's how i did mine
iptables -t nat -A PREROUTING -d xxx.xxx.xxx.xxx -p tcp -j DNAT --to-destination 10.0.0.1
iptables -t nat -A POSTROUTING -d 10.0.0.1 -j SNAT --to xxx.xxx.xxx.xxx
because the firewall has different ip than my mail server
You are forwarding it twice
Is 10.0.0.1 the internal interface of the firewall (that contains -d xxx.xxx.xxx.xxx) or is it a seperate machine
If it is on the same machine, try this (assuming you have a FORWARD rule too):
iptables -A FORWARD -i $EXTIF -p tcp --dport 25 -m state \ --state NEW,ESTABLISHED,RELATED -j ACCEPT
iptables -A PREROUTING -t nat -p tcp -d $EXTIP --dport 25 \ -j DNAT --to xxx.xxx.xxx.xxx
($EXTIF is the external insterface {eth0, eth1, etc.}, $EXTIP is the external IP address)
On 5/19/05, Peter Farrow peter@farrows.org wrote:
If you're doing true port forwarding, the internal server should see the ip address of the external machine in its logs.
This is how my machines log that do this, I use this type of entry in iptables:
iptables -t nat -A PREROUTING -p tcp --dport 80 -i eth1 -j DNAT --to 10.198.0.17
P.
Johnny Hughes wrote:
On Thu, 2005-05-19 at 21:08 +0800, Mark Quitoriano wrote:
i'm having a problem viewing logs on forwarded ports from the firewall to another server, i forwarded mail(port 25) from the firewall to an internal server. The problem is when i try to view the logs it just shows the firewall ip as the sender and not the original sender.
In reality, the firewall may be making the connection to the internal server... and not the external machine. Especially if the internal server is on a 192.168.x.x or 10.x.x.x network and you are connecting via NAT. If that is the case, the external machine is connecting to the firewall and the firewall is connecting to the internal server.
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos