On 03/02/17 20:24, Cameron Smith wrote:
Active Operations = Background Initialization (0%)
Once this completes you would be able to run a CC
well, I'm not so sure...
$ perccli /c0/v1 show init Controller = 0 Status = Success Description = None
VD Operation Status : ===================
----------------------------------------------------------- VD Operation Progress% Status Estimated Time Left ----------------------------------------------------------- 1 INIT - Not in progress - -----------------------------------------------------------
$ perccli /c0/v1 start init force Controller = 0 Status = Failure Description = None
Detailed Status : ===============
------------------------------------------------- VD Operation Status ErrCd ErrMsg ------------------------------------------------- 1 INIT Failed 1001 Start FGI not possible -------------------------------------------------
there are two more raid volumes in that chassis under a one H800. The whole lot:
DG/VD TYPE State Access Consist Cache Cac sCC Size Name --------------------------------------------------------------- 0/0 Cac0 Optl RW Yes RWTD - OFF 512.0 GB 3/1 RAID10 Optl RW No RWBC R OFF 18.188 TB 1/2 RAID0 Optl RW Yes RWBC R OFF 38.195 TB 2/3 RAID0 Optl RW Yes RWBC R OFF 12.731 TB ---------------------------------------------------------------
All these disks currently in raid10, plus one more, were before parts of a raid5 volume and all was a OK. Although inconsistent the volume is in the OS and appears normal.
it's quite a puzzle to me. thanks
Cameron _______________________________________________ CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos