Al Sparks spake the following on 2/15/2007 6:33 PM:
Al Sparks spake the following on 2/15/2007 4:44 PM:
One of the images (in Nahant) is to boot off the CD and install from the network.
That should work BUT I've only used it to get the entire ks file off the LAN. Booting from a CD is quick and easy (provided you have a CD drive as in this instance).
Probably the %include will work fairly easily if the original ks file's obtained via NFS; otherwise I suspect you'll need to do the mount; in %pre
How would I access the whole ks.cfg file on an nfs w/o dhcp?
That would be ideal. === Al
Assign an ip address during the boot process, and have everything referenced by ip address, instead of names.
At the boot prompt, I did the following:
linux ksdevice=eth0 ip=10.254.254.125 netmask=255.255.255.0 gateway=10.254.254.1 dns=10.1.1.21 ks=nfs:10.254.242.33:/vol/updts/staging/CentOS_4.3/ks.cfg
I get a blue screen with "Welcome to CentOS-4 i386" in the left upper corner, with the typical navigation key instructions at the bottom. It just hangs there.
I ping the IP address above, and get no pongs.
Suggestions? === Al
Dont you also need a method=nfs:nfs:10.254.242.33:/vol/updts/staging/CentOS_4.3/ for anaconda to get loaded? Just a guess as I haven't done any kickstart installs, so no flames if I'm talking out of my you know what!