Hi Friends,
I have an Excalibur 4GB USB Pen Drive Model Number EXC4. I think it is getting detected by the Centos but I am not sure about the mount point or the device point it is taking /dev/s??
Logs from /var/log/messages.
Mar 11 11:30:06 l_l_box kernel: usb 1-1: USB disconnect, address 3 Mar 11 11:30:22 l_l_box kernel: usb 1-1: new high speed USB device using address 4 Mar 11 11:30:22 l_l_box kernel: scsi2 : SCSI emulation for USB Mass Storage devices Mar 11 11:30:22 l_l_box kernel: Vendor: CORNICE Model: Inc. Storage Ele Rev: 0 0 Mar 11 11:30:22 l_l_box kernel: Type: Direct-Access ANSI SCSI revision: 02 Mar 11 11:30:22 l_l_box scsi.agent[17229]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0
sg3-utils are also installed on the system but sg_scan -i returns nothing
Output of /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-5.0.3.EL uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-5.0.3.EL uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.1 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-5.0.3.EL uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.0 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-5.0.3.EL ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=14cd ProdID=6600 Rev= 2.01 S: Manufacturer=Super Top S: Product=USB 2.0 IDE DEVICE S: SerialNumber=?????????? C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Please let me know if you need any further inputs.
Thanks & Regards
Ankush Grover