Further investigation.
If I create a route-eth0 file and put this in it:
default 192.168.122.1 dev eth0
I get this upon network restart:
Error: either "to" is duplicate, or "192.168.122.1" is a garbage.
Which this page: http://www.centos.org/docs/5/html/5.1/Deployment_Guide/s1%2dnetworkscripts%2...
says I will get if the default route is set via DHCP. So, the system is seeing the default route, and apparently even trying to set it, but it's not lasting.
I'm really lost on this one.
j
On Wednesday, August 21, 2013 13:48:02 Joshua J. Kugler wrote:
I have a CentOS 6.4 VM that is getting its DHCP information from dnsmasq (a libvirt instance). However, it is not applying the routing information. Attached is a tcpdump of the dhcpc output. You'll see:
Default-Gateway Option 3, length 4: 192.168.122.1However, when I run 'route -n', I get:
# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
Any ideas as to why the default route/gateway information isn't being applied?
j