no,my mean is the keepalived lvs need ipvsadm
2011/3/8 Steve Barnes steve@echo.id.au
if i only use ha+lvs configuration of keepalived.the load balance not
work.
then,i install ipvsadm and setup lvs with tun by ipvsadm ,it's work. command line below: ipvsadm -A -t http://172.16.39.100:80 172.16.39.100:80 -s rr ipvsadm -a -t http://172.16.39.100:80 172.16.39.100:80 -r http://172.16.39.30:80 172.16.39.30:80 -i ipvsadm -a -t http://172.16.39.100:80 172.16.39.100:80 -r http://172.16.39.40:80 172.16.39.40:80 -i -------------------------------------------------------------lb server
(master) keepalived.conf--------------------------------------------
global_defs { router_id LVS_DEVEL_M } vrrp_instance websev { state MASTER interface eth0 virtual_router_id 51 priority 100 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 172.16.39.100 } } virtual_server 172.16.39.100 80 { delay_loop 6 lb_algo rr lb_kind TUN persistence_timeout 10 protocol TCP real_server 172.16.39.30 80 { weight 1 TCP_CHECK { connect_timeout 3 nb_get_retry 3 delay_before_retry 3 } } real_server 172.16.39.40 80 { weight 1 TCP_CHECK { connect_timeout 3 nb_get_retry 3 delay_before_retry 3 } } } ---------------------------------------------------------------real
server 1 command
ifconfig tunl0 172.16.39.100 netmask 255.255.255.0 up route add -host 172.16.39.100 dev tunl0 echo "1" >/proc/sys/net/ipv4/conf/tunl0/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/tunl0/arp_announce echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce sysctl -p
Assuming I understand you correctly, and assuming you have an init.d script in place, run this command:
grep daemon /etc/init.d/keepalivedOdds are, you're editing /usr/local/etc/keepalived.conf, but the init.d script starts keepalived and tells it to use /etc/keepalived.conf
?
Steve
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos