Dear Simon,
And can you diff the config of eno1 and eno4.
# pwd /etc/sysconfig/network-scripts
Okay, nothing to find here.
What about eno2, you also have two IP addresses there and even in the same subnet, is this wanted or not? Can the second address of eno2 be found in the ifcfg file?
Both eno2 and eno4 have "scope global secondary dynamic" with the second address and it doesn't seem to come from the base configuration.
Simon
# diff -u ifcfg-eno1 ifcfg-eno4 --- ifcfg-eno1 2020-09-21 17:23:25.576672703 +0200 +++ ifcfg-eno4 2020-09-22 07:18:43.160532532 +0200 @@ -3,15 +3,20 @@ BROWSER_ONLY=no BOOTPROTO=none DEFROUTE=no -IPV4_FAILURE_FATAL=yes -IPV6INIT=no -IPV6_AUTOCONF=no +IPV4_FAILURE_FATAL=no +IPV6INIT=yes +IPV6_AUTOCONF=yes IPV6_DEFROUTE=no IPV6_FAILURE_FATAL=no IPV6_ADDR_GEN_MODE=stable-privacy -NAME=eno1 -UUID=1e382037-fec9-493d-a4f2-ace7d73a1e7b -DEVICE=eno1 +NAME=eno4 +UUID=dbd95c24-1ed7-4292-8dba-3934bd1476a0 +DEVICE=eno4 ONBOOT=yes -IPADDR=192.168.1.90 +IPADDR=192.168.2.98 PREFIX=24 +DNS1=10.10.100.1 +DNS2=10.10.100.2 +#DNS3=8.8.8.8 +PEERDNS=no +PEERROUTES=no
Can you show the config of eno4?
# cat ifcfg-eno4 TYPE=Ethernet PROXY_METHOD=none BROWSER_ONLY=no BOOTPROTO=none DEFROUTE=no IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=no IPV6_FAILURE_FATAL=no IPV6_ADDR_GEN_MODE=stable-privacy NAME=eno4 UUID=dbd95c24-1ed7-4292-8dba-3934bd1476a0 DEVICE=eno4 ONBOOT=yes IPADDR=192.168.2.98 PREFIX=24 DNS1=10.10.100.1 DNS2=10.10.100.2 #DNS3=8.8.8.8 PEERDNS=no PEERROUTES=no
Regards,
Felix
CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos