Search results for query "net 9 runtime"

78 messages

[CentOS] Reset adapter

by sebastian

Hi, one of our rented root-server has a problem with the network-adapter.The network is interrupted from time to time and i can not longer connect to our server. We can only reboote (remote) the server and restart the network. I think it was an network-driver-problem from an "Intel Corporation 82574L Gigabit Network" --- e1000e But now i have install a new kernel-driver and i have the same problem again. Here an extract of the logs: <---//first log with old driver//--- May 22 16:52:40 mega2 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k May 22 16:52:40 mega2 kernel: e1000e: Copyright(c) 1999 - 2011 Intel Corporation. May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: Disabling ASPM L0s May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 22 16:52:40 mega2 kernel: scsi 0:1:0:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 22 16:52:40 mega2 kernel: scsi 0:1:1:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 22 16:52:40 mega2 kernel: usb 1-1.2: new full speed USB device using ehci_hcd and address 3 May 22 16:52:40 mega2 kernel: scsi 0:3:0:0: Enclosure ADAPTEC Virtual SGPIO PQ: 0 ANSI: 5 May 22 16:52:40 mega2 kernel: Refined TSC clocksource calibration: 3092.973 MHz. May 22 16:52:40 mega2 kernel: Switching to clocksource tsc May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:38 May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection May 22 16:52:40 mega2 kernel: e1000e 0000:04:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: Disabling ASPM L0s May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 May 22 16:52:40 mega2 kernel: usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 May 22 16:52:40 mega2 kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 22 16:52:40 mega2 kernel: usb 1-1.2: Product: Hermon USB hidmouse Device May 22 16:52:40 mega2 kernel: usb 1-1.2: Manufacturer: Winbond Electronics Corp May 22 16:52:40 mega2 kernel: usb 1-1.2: configuration #1 chosen from 1 choice May 22 16:52:40 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 May 22 16:52:40 mega2 kernel: generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 May 22 16:52:40 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 May 22 16:52:40 mega2 kernel: generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 May 22 16:52:40 mega2 kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:39 May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection May 22 16:52:40 mega2 kernel: e1000e 0000:05:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF May 22 16:52:40 mega2 kernel: scsi: waiting for bus probes to complete ... May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] 878686208 512-byte logical blocks: (449 GB/418 GiB) May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] Write Protect is off May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA May 22 16:52:40 mega2 kernel: sda: sda1 sda2 May 22 16:52:40 mega2 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk May 22 16:52:40 mega2 kernel: dracut: Scanning devices sda2 for LVM logical volumes vg_r378120301/lv_root vg_r378120301/lv_swap May 22 16:52:40 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_root' [50.00 GiB] inherit May 22 16:52:40 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_home' [358.70 GiB] inherit May 22 16:52:40 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_swap' [9.80 GiB] inherit May 22 16:52:40 mega2 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: May 22 16:52:40 mega2 kernel: dracut: Mounted root filesystem /dev/mapper/vg_r378120301-lv_root May 22 16:52:40 mega2 kernel: SELinux: Disabled at runtime. May 22 16:52:40 mega2 kernel: type=1404 audit(1337698352.963:2): selinux=0 auid=4294967295 ses=4294967295 May 22 16:52:40 mega2 kernel: dracut: May 22 16:52:40 mega2 kernel: dracut: Switching root May 22 16:52:40 mega2 kernel: udev: starting version 147 May 22 16:52:40 mega2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 22 16:52:40 mega2 kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0 May 22 16:52:40 mega2 kernel: scsi 0:1:1:0: Attached scsi generic sg2 type 0 May 22 16:52:40 mega2 kernel: scsi 0:3:0:0: Attached scsi generic sg3 type 13 May 22 16:52:40 mega2 kernel: ses 0:3:0:0: Attached Enclosure device May 22 16:52:40 mega2 kernel: iTCO_vendor_support: vendor-support=0 May 22 16:52:40 mega2 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 May 22 16:52:40 mega2 kernel: iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) May 22 16:52:40 mega2 kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) May 22 16:52:40 mega2 kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 22 16:52:40 mega2 kernel: ACPI: I/O resource 0000:00:1f.3 [0x1180-0x119f] conflicts with ACPI region SMIO [0x1180-0x119f] May 22 16:52:40 mega2 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver May 22 16:52:40 mega2 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: May 22 16:52:40 mega2 kernel: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: May 22 16:52:40 mega2 kernel: Adding 10272760k swap on /dev/mapper/vg_r378120301-lv_swap. Priority:-1 extents:1 across:10272760k May 22 16:52:40 mega2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team May 22 16:52:40 mega2 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) May 22 16:52:40 mega2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team May 22 16:52:40 mega2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready May 22 16:52:40 mega2 kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None May 22 16:52:40 mega2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready May 22 16:52:40 mega2 rpc.statd[1764]: Version 1.2.3 starting May 22 16:52:40 mega2 sm-notify[1765]: Version 1.2.3 starting May 22 16:52:40 mega2 kernel: RPC: Registered udp transport module. May 22 16:52:40 mega2 kernel: RPC: Registered tcp transport module. May 22 16:52:40 mega2 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. May 22 16:52:40 mega2 lldpad: bound ctrl iface to /com/intel/lldpad May 22 16:52:40 mega2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com> May 22 16:52:40 mega2 kernel: All bugs added by David S. Miller <davem(a)redhat.com> May 22 16:52:40 mega2 kernel: 8021q: adding VLAN 0 to HW filter on device eth0 May 22 16:52:40 mega2 kernel: bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.8 (Oct 02, 2011) ... ... ... May 23 00:01:24 mega2 kernel: ------------[ cut here ]------------ May 23 00:01:24 mega2 kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) May 23 00:01:24 mega2 kernel: Hardware name: X9SCL/X9SCM May 23 00:01:24 mega2 kernel: NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out May 23 00:01:24 mega2 kernel: Modules linked in: ipt_REDIRECT xt_conntrack iptable_mangle nf_conntrack_ftp ipt_LOG xt_limit xt_multiport iptable_nat nf_nat bnx2fc fcoe libfcoe 8021q garp stp llc libfc scsi_transport_fc scsi_tgt sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support ses enclosure sg ext4 mbcache jbd2 sd_mod crc_t10dif e1000e aacraid(U) dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio ipv6 cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi [last unloaded: scsi_wait_scan] May 23 00:01:24 mega2 kernel: Pid: 0, comm: swapper Not tainted 2.6.32-220.17.1.el6.x86_64 #1 May 23 00:01:24 mega2 kernel: Call Trace: May 23 00:01:24 mega2 kernel: <IRQ> [<ffffffff81069c97>] ? warn_slowpath_common+0x87/0xc0 May 23 00:01:24 mega2 kernel: [<ffffffff81069d86>] ? warn_slowpath_fmt+0x46/0x50 May 23 00:01:24 mega2 kernel: [<ffffffff8144ab2d>] ? dev_watchdog+0x26d/0x280 May 23 00:01:24 mega2 kernel: [<ffffffff8107d2b4>] ? mod_timer+0x144/0x220 May 23 00:01:24 mega2 kernel: [<ffffffff8144a8c0>] ? dev_watchdog+0x0/0x280 May 23 00:01:24 mega2 kernel: [<ffffffff8107cab7>] ? run_timer_softirq+0x197/0x340 May 23 00:01:24 mega2 kernel: [<ffffffff810a0dc0>] ? tick_sched_timer+0x0/0xc0 May 23 00:01:24 mega2 kernel: [<ffffffff8102aead>] ? lapic_next_event+0x1d/0x30 May 23 00:01:24 mega2 kernel: [<ffffffff81072291>] ? __do_softirq+0xc1/0x1d0 May 23 00:01:24 mega2 kernel: [<ffffffff810958b0>] ? hrtimer_interrupt+0x140/0x250 May 23 00:01:24 mega2 kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 May 23 00:01:24 mega2 kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 May 23 00:01:24 mega2 kernel: [<ffffffff81072075>] ? irq_exit+0x85/0x90 May 23 00:01:24 mega2 kernel: [<ffffffff814f5450>] ? smp_apic_timer_interrupt+0x70/0x9b May 23 00:01:24 mega2 kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 May 23 00:01:24 mega2 kernel: <EOI> [<ffffffff812c4f9e>] ? intel_idle+0xde/0x170 May 23 00:01:24 mega2 kernel: [<ffffffff812c4f81>] ? intel_idle+0xc1/0x170 May 23 00:01:24 mega2 kernel: [<ffffffff813fa537>] ? cpuidle_idle_call+0xa7/0x140 May 23 00:01:24 mega2 kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 May 23 00:01:24 mega2 kernel: [<ffffffff814d479a>] ? rest_init+0x7a/0x80 May 23 00:01:24 mega2 kernel: [<ffffffff81c1ff7b>] ? start_kernel+0x424/0x430 May 23 00:01:24 mega2 kernel: [<ffffffff81c1f33a>] ? x86_64_start_reservations+0x125/0x129 May 23 00:01:24 mega2 kernel: [<ffffffff81c1f438>] ? x86_64_start_kernel+0xfa/0x109 May 23 00:01:24 mega2 kernel: ---[ end trace 142cbdb308188d13 ]--- May 23 00:01:24 mega2 kernel: e1000e 0000:04:00.0: eth0: Reset adapter ---//end first log with reset apapter//---> <--//second log with new driver//--- May 23 10:08:22 mega2 kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.11.3-NAPI May 23 10:08:22 mega2 kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation. May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: Disabling ASPM L0s May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 23 10:08:22 mega2 kernel: scsi 0:1:0:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 23 10:08:22 mega2 kernel: scsi 0:1:1:0: Direct-Access TOSHIBA MBF245LRC 6104 PQ: 1 ANSI: 5 May 23 10:08:22 mega2 kernel: usb 1-1.2: new full speed USB device using ehci_hcd and address 3 May 23 10:08:22 mega2 kernel: Refined TSC clocksource calibration: 3092.973 MHz. May 23 10:08:22 mega2 kernel: Switching to clocksource tsc May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:38 May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection May 23 10:08:22 mega2 kernel: e1000e 0000:04:00.0: eth0: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: Disabling ASPM L0s May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 May 23 10:08:22 mega2 kernel: usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 May 23 10:08:22 mega2 kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 23 10:08:22 mega2 kernel: usb 1-1.2: Product: Hermon USB hidmouse Device May 23 10:08:22 mega2 kernel: usb 1-1.2: Manufacturer: Winbond Electronics Corp May 23 10:08:22 mega2 kernel: usb 1-1.2: configuration #1 chosen from 1 choice May 23 10:08:22 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 May 23 10:08:22 mega2 kernel: generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 May 23 10:08:22 mega2 kernel: input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5 May 23 10:08:22 mega2 kernel: generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 May 23 10:08:22 mega2 kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:75:ad:39 May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection May 23 10:08:22 mega2 kernel: e1000e 0000:05:00.0: eth1: MAC: 4, PHY: 8, PBA No: FFFFFF-0FF May 23 10:08:22 mega2 kernel: scsi: waiting for bus probes to complete ... May 23 10:08:22 mega2 kernel: scsi 0:3:0:0: Enclosure ADAPTEC Virtual SGPIO PQ: 0 ANSI: 5 May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] 878686208 512-byte logical blocks: (449 GB/418 GiB) May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] Write Protect is off May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA May 23 10:08:22 mega2 kernel: sda: sda1 sda2 May 23 10:08:22 mega2 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk May 23 10:08:22 mega2 kernel: dracut: Scanning devices sda2 for LVM logical volumes vg_r378120301/lv_root vg_r378120301/lv_swap May 23 10:08:22 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_root' [50.00 GiB] inherit May 23 10:08:22 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_home' [358.70 GiB] inherit May 23 10:08:22 mega2 kernel: dracut: inactive '/dev/vg_r378120301/lv_swap' [9.80 GiB] inherit May 23 10:08:22 mega2 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: May 23 10:08:22 mega2 kernel: dracut: Mounted root filesystem /dev/mapper/vg_r378120301-lv_root May 23 10:08:22 mega2 kernel: SELinux: Disabled at runtime. May 23 10:08:22 mega2 kernel: type=1404 audit(1337760494.977:2): selinux=0 auid=4294967295 ses=4294967295 May 23 10:08:22 mega2 kernel: dracut: May 23 10:08:22 mega2 kernel: dracut: Switching root May 23 10:08:22 mega2 kernel: udev: starting version 147 May 23 10:08:22 mega2 kernel: ses 0:3:0:0: Attached Enclosure device May 23 10:08:22 mega2 kernel: iTCO_vendor_support: vendor-support=0 May 23 10:08:22 mega2 kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 May 23 10:08:22 mega2 kernel: iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) May 23 10:08:22 mega2 kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) May 23 10:08:22 mega2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 23 10:08:22 mega2 kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0 May 23 10:08:22 mega2 kernel: scsi 0:1:1:0: Attached scsi generic sg2 type 0 May 23 10:08:22 mega2 kernel: ses 0:3:0:0: Attached scsi generic sg3 type 13 May 23 10:08:22 mega2 kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 23 10:08:22 mega2 kernel: ACPI: I/O resource 0000:00:1f.3 [0x1180-0x119f] conflicts with ACPI region SMIO [0x1180-0x119f] May 23 10:08:22 mega2 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver May 23 10:08:22 mega2 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: May 23 10:08:22 mega2 kernel: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: May 23 10:08:22 mega2 kernel: Adding 10272760k swap on /dev/mapper/vg_r378120301-lv_swap. Priority:-1 extents:1 across:10272760k May 23 10:08:22 mega2 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team May 23 10:08:22 mega2 kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max) May 23 10:08:22 mega2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team May 23 10:08:22 mega2 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready May 23 10:08:22 mega2 kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None May 23 10:08:22 mega2 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready May 23 10:08:22 mega2 rpc.statd[1753]: Version 1.2.3 starting May 23 10:08:22 mega2 sm-notify[1754]: Version 1.2.3 starting May 23 10:08:22 mega2 kernel: RPC: Registered udp transport module. May 23 10:08:22 mega2 kernel: RPC: Registered tcp transport module. May 23 10:08:22 mega2 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. May 23 10:08:22 mega2 lldpad: bound ctrl iface to /com/intel/lldpad May 23 10:08:22 mega2 kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com> May 23 10:08:22 mega2 kernel: All bugs added by David S. Miller <davem(a)redhat.com> May 23 10:08:22 mega2 kernel: 8021q: adding VLAN 0 to HW filter on device eth0 May 23 10:08:22 mega2 kernel: bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.8 (Oct 02, 2011) ... ... ... May 23 10:32:26 mega2 kernel: ------------[ cut here ]------------ May 23 10:32:26 mega2 kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) May 23 10:32:26 mega2 kernel: Hardware name: X9SCL/X9SCM May 23 10:32:26 mega2 kernel: NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out May 23 10:32:26 mega2 kernel: Modules linked in: ipt_REDIRECT xt_conntrack iptable_mangle nf_conntrack_ftp ipt_LOG xt_limit xt_multiport iptable_nat nf_nat bnx2fc fcoe 8021q libfcoe libfc garp stp llc scsi_transport_fc scsi_tgt sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables i2c_i801 i2c_core sg iTCO_wdt iTCO_vendor_support ses enclosure ext4 mbcache jbd2 sd_mod crc_t10dif e1000e(U) aacraid(U) dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio ipv6 cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi [last unloaded: scsi_wait_scan] May 23 10:32:26 mega2 kernel: Pid: 0, comm: swapper Not tainted 2.6.32-220.17.1.el6.x86_64 #1 May 23 10:32:26 mega2 kernel: Call Trace: May 23 10:32:26 mega2 kernel: <IRQ> [<ffffffff81069c97>] ? warn_slowpath_common+0x87/0xc0 May 23 10:32:26 mega2 kernel: [<ffffffff8101bf06>] ? intel_pmu_enable_all+0xa6/0x150 May 23 10:32:26 mega2 kernel: [<ffffffff81069d86>] ? warn_slowpath_fmt+0x46/0x50 May 23 10:32:26 mega2 kernel: [<ffffffff8144ab2d>] ? dev_watchdog+0x26d/0x280 May 23 10:32:26 mega2 kernel: [<ffffffff8144a8c0>] ? dev_watchdog+0x0/0x280 May 23 10:32:26 mega2 kernel: [<ffffffff8107cab7>] ? run_timer_softirq+0x197/0x340 May 23 10:32:26 mega2 kernel: [<ffffffff810a0dc0>] ? tick_sched_timer+0x0/0xc0 May 23 10:32:26 mega2 kernel: [<ffffffff8102aead>] ? lapic_next_event+0x1d/0x30 May 23 10:32:26 mega2 kernel: [<ffffffff81072291>] ? __do_softirq+0xc1/0x1d0 May 23 10:32:26 mega2 kernel: [<ffffffff810958b0>] ? hrtimer_interrupt+0x140/0x250 May 23 10:32:26 mega2 kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 May 23 10:32:26 mega2 kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 May 23 10:32:26 mega2 kernel: [<ffffffff81072075>] ? irq_exit+0x85/0x90 May 23 10:32:26 mega2 kernel: [<ffffffff814f5450>] ? smp_apic_timer_interrupt+0x70/0x9b May 23 10:32:26 mega2 kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 May 23 10:32:26 mega2 kernel: <EOI> [<ffffffff812c4f9e>] ? intel_idle+0xde/0x170 May 23 10:32:26 mega2 kernel: [<ffffffff812c4f81>] ? intel_idle+0xc1/0x170 May 23 10:32:26 mega2 kernel: [<ffffffff813fa537>] ? cpuidle_idle_call+0xa7/0x140 May 23 10:32:26 mega2 kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 May 23 10:32:26 mega2 kernel: [<ffffffff814d479a>] ? rest_init+0x7a/0x80 May 23 10:32:26 mega2 kernel: [<ffffffff81c1ff7b>] ? start_kernel+0x424/0x430 May 23 10:32:26 mega2 kernel: [<ffffffff81c1f33a>] ? x86_64_start_reservations+0x125/0x129 May 23 10:32:26 mega2 kernel: [<ffffffff81c1f438>] ? x86_64_start_kernel+0xfa/0x109 May 23 10:32:26 mega2 kernel: ---[ end trace 9dfbc5721c4b2955 ]--- May 23 10:32:26 mega2 kernel: e1000e 0000:04:00.0: eth0: Reset adapter ---//end second log with the same error//---> I am unfortunately at a loss, what could the problem be? Thanks Sebastian

12 years, 11 months

Re: [Arm-dev] Cubieboard5 performance

by Robert Moskowitz

On 08/10/2018 08:51 AM, Andreas Reschke wrote: > > Am 10.08.2018 um 14:36 schrieb Robert Moskowitz: >> >> On 08/10/2018 08:17 AM, arm_ml(a)rirasoft.de wrote: >>> Am 2018-08-09 17:31, schrieb Robert Moskowitz: >>>> On 08/09/2018 11:21 AM, arm_ml(a)rirasoft.de wrote: >>>>> Am 2018-08-09 16:57, schrieb Robert Moskowitz: >>>>>> On 08/09/2018 10:31 AM, arm_ml(a)rirasoft.de wrote: >>>>>>> Am 2018-08-09 13:58, schrieb Robert Moskowitz: >>>>>>>> On 08/09/2018 07:34 AM, arm_ml(a)rirasoft.de wrote: >>>>>>>>> Am 2018-08-07 12:23, schrieb Pablo Sebastián Greco: >>>>>>>>>> <snip> >>>>> snip >>> Wow, I can boot it, but I can't login and can't install the kernel >>> from Pablo. Whats next? >>> >>> >>> U-Boot SPL 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) >> Good you got the current uboot. >> >>> DRAM: 2048 MiB >>> Trying to boot from MMC1 >>> >>> >>> U-Boot 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) Allwinner Technology >>> >>> CPU: Allwinner A83T (SUN8I 1673) >>> Model: Cubietech Cubietruck Plus >> Do you have any other arm soc? If you put that cards uboot on, boot >> up on that card, install the new kernel, then go back to the >> Cubietruck+ uboot, that would work. >> >> Pablo may know of a simpler method, as I don't do kernel work. I did >> work a lot with uboot a couple years ago. > Sorry: this didn't work, because this Image didn't boot on my Cubietruck > 3. Maybe Pablo has an Idea? Did you dd the Cubietruck uboot? I have booted on my C3. Though there may be a 1st boot problem here on things that are copied during 1st boot based on what uboot is present. In that case, things are really hard, and quite beyond my limited skills. > >> >>> I2C: ready >>> DRAM: 2 GiB >>> MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 >>> Loading Environment from FAT... *** Warning - bad CRC, using default >>> environment >>> >>> Failed (-5) >>> In: serial >>> Out: serial >>> Err: serial >>> Net: No ethernet found. >>> starting USB... >>> USB0: failed to get usb PHY >>> Port not available. >>> USB1: failed to get usb@01c1a000 usb PHY >>> Port not available. >>> USB2: failed to get usb@01c1b000 usb PHY >>> Port not available. >>> Hit any key to stop autoboot: 0 >>> switch to partitions #0, OK >>> mmc0 is current device >>> Scanning mmc 0:2... >>> Found /extlinux/extlinux.conf >>> Retrieving file: /extlinux/extlinux.conf >>> 857 bytes read in 16 ms (51.8 KiB/s) >>> Ignoring unknown command: ui >>> Ignoring malformed menu command: autoboot >>> Ignoring malformed menu command: hidden >>> Ignoring unknown command: totaltimeout >>> CentOS-Userland-7-armv7hl-generic-Minimal-1804 Boot Options. >>> 1: CentOS-Userland-7-armv7hl-generic-Minimal-1804 >>> (4.14.28-201.el7.centos.armv7hl) >>> 2: single >>> Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-1804 >>> (4.14.28-201.el7.centos.armv7hl) >>> Retrieving file: /initramfs-4.14.28-201.el7.centos.armv7hl.img >>> 42665567 bytes read in 11495 ms (3.5 MiB/s) >>> Retrieving file: /vmlinuz-4.14.28-201.el7.centos.armv7hl >>> 6627840 bytes read in 682 ms (9.3 MiB/s) >>> append: ro root=UUID=e4d55603-4823-4fb7-ab52-46f2e9fcaae1 selinux=off >>> Retrieving file: >>> /dtb-4.14.28-201.el7.centos.armv7hl/sun8i-a83t-cubietruck-plus.dtb >>> 6627840 bytes read in 682 ms (9.3 MiB/s) >>> append: ro root=UUID=e4d55603-4823-4fb7-ab52-46f2e9fcaae1 selinux=off >>> Retrieving file: >>> /dtb-4.14.28-201.el7.centos.armv7hl/sun8i-a83t-cubietruck-plus.dtb >>> 10902 bytes read in 586 ms (17.6 KiB/s) >>> ## Flattened Device Tree blob at 43000000 >>> Booting using the fdt blob at 0x43000000 >>> Loading Ramdisk to 4774f000, end 49fff65f ... OK >>> Loading Device Tree to 47749000, end 4774ea95 ... OK >>> >>> Starting kernel ... >>> >>> [ 0.000000] Booting Linux on physical CPU 0x0 >>> [ 0.000000] Linux version 4.14.28-201.el7.centos.armv7hl >>> (mockbuild(a)armhfp-02.bsys.centos.org) (gcc version 4.8.5 20150623 >>> (Red Hat 4.8.5-16) (GCC)) #1 SMP Mon Mar 19 20:25:46 UTC 2018 >>> [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), >>> cr=10c5387d >>> [ 0.000000] CPU: div instructions available: patching division code >>> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing >>> instruction cache >>> [ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck Plus >>> [ 0.000000] Memory policy: Data cache writealloc >>> [ 0.000000] efi: Getting EFI parameters from FDT: >>> [ 0.000000] efi: UEFI not found. >>> snip >>> Welcome to CentOS Linux 7 (Core) dracut-033-535.el7 (Initramfs)! >>> >>> [ 5.950324] systemd[1]: No hostname configured. >>> [ 5.954983] systemd[1]: Set hostname to <localhost>. >>> [ 5.960338] systemd[1]: Initializing machine ID from random >>> generator. >>> [ OK ] Reached target Swap. >>> [ 6.310341] systemd[1]: Reached target Swap. >>> [ 6.314834] systemd[1]: Starting Swap. >>> [ OK ] Created slice Root Slice. >>> [ 6.326288] systemd[1]: Created slice Root Slice. >>> [ 6.331225] systemd[1]: Starting Root Slice. >>> [ OK ] Listening on Journal Socket. >>> [ OK ] Listening on udev Kernel Socket. >>> [ OK ] Reached target Timers. >>> [ OK ] Created slice System Slice. >>> Starting Create list of required st... nodes for the current >>> kernel... >>> Starting Journal Service... >>> Starting Apply Kernel Variables... >>> [ OK ] Listening on udev Control Socket. >>> [ OK ] Reached target Slices. >>> [ OK ] Reached target Sockets. >>> Starting Setup Virtual Console... >>> [ OK ] Reached target Local File Systems. >>> Starting dracut cmdline hook... >>> [ OK ] Started Create list of required sta...ce nodes for the >>> current kernel. >>> [ OK ] Started Apply Kernel Variables. >>> [ OK ] Started Setup Virtual Console. >>> Starting Create Static Device Nodes in /dev... >>> [ OK ] Started Journal Service. >>> [ OK ] Started Create Static Device Nodes in /dev. >>> [ OK ] Started dracut cmdline hook. >>> Starting dracut pre-udev hook... >>> [ OK ] Started dracut pre-udev hook. >>> Starting udev Kernel Device Manager... >>> [ OK ] Started udev Kernel Device Manager. >>> Starting udev Coldplug all Devices... >>> [ OK ] Started udev Coldplug all Devices. >>> Starting Show Plymouth Boot Screen... >>> [ OK ] Reached target System Initialization. >>> Starting dracut initqueue hook... >>> [ OK ] Started Show Plymouth Boot Screen. >>> [ OK ] Reached target Paths. >>> [ OK ] Reached target Basic System. >>> Mounting Configuration File System... >>> [ OK ] Mounted Configuration File System. >>> [ 9.258492] ehci-platform: EHCI generic platform driver >>> [ 9.310921] sunxi-mmc 1c0f000.mmc: Got CD GPIO >>> [ 9.353339] sunxi-mmc 1c0f000.mmc: base:0xf0b41000 irq:24 >>> [ 9.401563] mmc0: host does not support reading read-only switch, >>> assuming write-enable >>> [ 9.409746] sunxi-mmc 1c11000.mmc: base:0xf0b45000 irq:25 >>> [ 9.418906] mmc0: new high speed SDHC card at address 0007 >>> [ 9.488974] mmc1: new DDR MMC card at address 0001 >>> [ 9.710645] mmcblk0: mmc0:0007 SD32G 29.0 GiB >>> [ 9.720620] mmcblk0: p1 p2 p3 p4 >>> [ 9.731581] mmcblk1: mmc1:0001 NCard 7.30 GiB >>> [ 9.736734] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB >>> [ 9.744053] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB >>> [ 9.754396] mmcblk1: p1 p2 >>> [ OK ] Found device >>> /dev/disk/by-uuid/e4d55603-4823-4fb7-ab52-46f2e9fcaae1. >>> [ OK ] Started dracut initqueue hook. >>> [ OK ] Reached target Remote File Systems (Pre). >>> [ OK ] Reached target Remote File Systems. >>> Starting File System Check on >>> /dev/...3-4823-4fb7-ab52-46f2e9fcaae1... >>> [ OK ] Started File System Check on >>> /dev/d...603-4823-4fb7-ab52-46f2e9fcaae1. >>> Mounting /sysroot... >>> [ 10.483219] EXT4-fs (mmcblk0p4): mounted filesystem with ordered >>> data mode. Opts: (null) >>> [ OK ] Mounted /sysroot. >>> [ OK ] Reached target Initrd Root File System. >>> Starting Reload Configuration from the Real Root... >>> [ OK ] Started Reload Configuration from the Real Root. >>> [ OK ] Reached target Initrd File Systems. >>> [ OK ] Reached target Initrd Default Target. >>> Starting dracut pre-pivot and cleanup hook... >>> [ OK ] Started dracut pre-pivot and cleanup hook. >>> Starting Cleaning Up and Shutting Down Daemons... >>> [ OK ] Stopped Cleaning Up and Shutting Down Daemons. >>> [ OK ] Stopped dracut pre-pivot and cleanup hook. >>> Stopping dracut pre-pivot and cleanup hook... >>> [ OK ] Stopped target Initrd Default Target. >>> [ OK ] Stopped target Basic System. >>> [ OK ] Stopped target Paths. >>> [ OK ] Stopped target System Initialization. >>> Stopping udev Kernel Device Manager... >>> [ OK ] Stopped target Swap. >>> [ OK ] Stopped target Slices. >>> [ OK ] Stopped target Sockets. >>> [ OK ] Stopped Apply Kernel Variables. >>> Stopping Apply Kernel Variables... >>> [ OK ] Stopped target Timers. >>> [ OK ] Stopped target Local File Systems. >>> Starting Plymouth switch root service... >>> [ OK ] Stopped target Remote File Systems. >>> [ OK ] Stopped target Remote File Systems (Pre). >>> [ OK ] Stopped dracut initqueue hook. >>> Stopping dracut initqueue hook... >>> [ OK ] Stopped udev Coldplug all Devices. >>> Stopping udev Coldplug all Devices... >>> [ OK ] Stopped udev Kernel Device Manager. >>> snip >>> Welcome to CentOS Linux 7 (Core)! >>> >>> [ OK ] Stopped Switch Root. >>> [ OK ] Stopped Journal Service. >>> Starting Journal Service... >>> [ OK ] Reached target Local Encrypted Volumes. >>> [ OK ] Created slice >>> system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice. >>> [ OK ] Set up automount Arbitrary Executab...ats File System >>> Automount Point. >>> Mounting Debug File System... >>> [ OK ] Listening on /dev/initctl Compatibility Named Pipe. >>> [ OK ] Stopped target Switch Root. >>> [ OK ] Stopped target Initrd File Systems. >>> [ OK ] Stopped target Initrd Root File System. >>> [ OK ] Stopped File System Check on Root Device. >>> Stopping File System Check on Root Device... >>> [ OK ] Listening on udev Kernel Socket. >>> [ OK ] Created slice system-getty.slice. >>> Starting Read and set NIS domainname from >>> /etc/sysconfig/network... >>> Starting Collect Read-Ahead Data... >>> [ OK ] Listening on Delayed Shutdown Socket. >>> Mounting POSIX Message Queue File System... >>> [ OK ] Created slice User and Session Slice. >>> [ OK ] Reached target Slices. >>> [ OK ] Reached target Remote File Systems. >>> [ OK ] Created slice system-serial\x2dgetty.slice. >>> [ OK ] Listening on udev Control Socket. >>> Starting Create list of required st... nodes for the current >>> kernel... >>> [ OK ] Reached target Paths. >>> Starting Replay Read-Ahead Data... >>> [ OK ] Mounted POSIX Message Queue File System. >>> [ OK ] Mounted Debug File System. >>> [ OK ] Started Journal Service. >>> [ OK ] Started Collect Read-Ahead Data. >>> [ OK ] Started Replay Read-Ahead Data. >>> [ OK ] Started Read and set NIS domainname from >>> /etc/sysconfig/network. >>> [ OK ] Started Create list of required sta...ce nodes for the >>> current kernel. >>> Starting Remount Root and Kernel File Systems... >>> Starting Create Static Device Nodes in /dev... >>> Starting Apply Kernel Variables... >>> [ 17.296550] EXT4-fs (mmcblk0p4): re-mounted. Opts: (null) >>> [ OK ] Started Apply Kernel Variables. >>> [ OK ] Started Remount Root and Kernel File Systems. >>> Starting udev Coldplug all Devices... >>> Starting Load/Save Random Seed... >>> Starting Configure read-only root support... >>> Starting Flush Journal to Persistent Storage... >>> [ OK ] Started Create Static Device Nodes in /dev. >>> [ OK ] Started Load/Save Random Seed. >>> [ 17.818547] systemd-journald[427]: Received request to flush >>> runtime journal from PID 1 >>> [ OK ] Reached target Local File Systems (Pre). >>> Starting udev Kernel Device Manager... >>> [ OK ] Started Flush Journal to Persistent Storage. >>> [ OK ] Started Configure read-only root support. >>> [ OK ] Started udev Kernel Device Manager. >>> [ OK ] Started udev Coldplug all Devices. >>> [ 19.146181] cpu cpu0: failed to get clock: -2 >>> [ 19.218261] cpufreq-dt: probe of cpufreq-dt failed with error -2 >>> [ 19.708227] ehci-platform 1c1a000.usb: EHCI Host Controller >>> [ 19.721852] ehci-platform 1c1a000.usb: new USB bus registered, >>> assigned bus number 1 >>> [ 19.740546] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000 >>> [ 19.762241] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 >>> [ 19.775259] usb usb1: New USB device found, idVendor=1d6b, >>> idProduct=0002 >>> [ 19.782236] usb usb1: New USB device strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> [ 19.789508] usb usb1: Product: EHCI Host Controller >>> [ 19.794416] usb usb1: Manufacturer: Linux >>> 4.14.28-201.el7.centos.armv7hl ehci_hcd >>> [ 19.801926] usb usb1: SerialNumber: 1c1a000.usb >>> [ 19.844670] hub 1-0:1.0: USB hub found >>> [ 19.854212] hub 1-0:1.0: 1 port detected >>> [ 19.868545] ehci-platform 1c1b000.usb: EHCI Host Controller >>> [ 19.882930] ehci-platform 1c1b000.usb: new USB bus registered, >>> assigned bus number 2 >>> [ 19.901798] ehci-platform 1c1b000.usb: irq 27, io mem 0x01c1b000 >>> [ 19.923267] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 >>> [ 19.936351] usb usb2: New USB device found, idVendor=1d6b, >>> idProduct=0002 >>> [ 19.943225] usb usb2: New USB device strings: Mfr=3, Product=2, >>> SerialNumber=1 >>> [ 19.950493] usb usb2: Product: EHCI Host Controller >>> [ 19.955399] usb usb2: Manufacturer: Linux >>> 4.14.28-201.el7.centos.armv7hl ehci_hcd >>> [ 19.962907] usb usb2: SerialNumber: 1c1b000.usb >>> [ 20.008450] hub 2-0:1.0: USB hub found >>> [ 20.019233] hub 2-0:1.0: 1 port detected >>> [ OK ] Found device /dev/ttyS0. >>> [ 20.253371] usb 1-1: new high-speed USB device number 2 using >>> ehci-platform >>> [ 20.304553] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled >>> (timeout=16 sec, nowayout=0) >>> [ 20.350267] usb 2-1: new high-speed USB device number 2 using >>> ehci-platform >>> [ 20.397887] usb 1-1: New USB device found, idVendor=05e3, >>> idProduct=0718 >>> [ 20.404808] usb 1-1: New USB device strings: Mfr=0, Product=1, >>> SerialNumber=2 >>> [ 20.412007] usb 1-1: Product: USB Storage >>> [ 20.416058] usb 1-1: SerialNumber: 000000000033 >>> [ 20.440034] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz >>> [ 20.492897] usb 2-1: New USB device found, idVendor=0424, >>> idProduct=3503 >>> [ 20.499823] usb 2-1: New USB device strings: Mfr=0, Product=0, >>> SerialNumber=0 >>> [ 20.523676] hub 2-1:1.0: USB hub found >>> [ 20.535200] hub 2-1:1.0: 2 ports detected >>> [ 20.626373] usb3503 usb-hub: Ports disabled with no control interface >>> [ OK ] Found device /dev/disk/by-uuid/2CA3-F2A2. >>> [ 20.760223] usb3503 usb-hub: switched to HUB mode >>> [ 20.765030] usb3503 usb-hub: usb3503_probe: probed in hub mode >>> [ OK ] Found device >>> /dev/disk/by-uuid/13ad9f52-e2ca-4fd1-83d6-7b0af86a85df. >>> Mounting /boot... >>> [ 20.966073] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to >>> feature incompatibilities >>> [FAILED] Failed to mount /boot. >>> See 'systemctl status boot.mount' for details. >>> [DEPEND] Dependency failed for Local File Systems. >>> [DEPEND] Dependency failed for Relabel all filesystems, if necessary. >>> [DEPEND] Dependency failed for Migrate local... structure to the new >>> structure. >>> [DEPEND] Dependency failed for /boot/fw. >>> [ OK ] Reached target Timers. >>> [ OK ] Reached target Network (Pre). >>> [ OK ] Reached target Network. >>> [ OK ] Reached target Network is Online. >>> [ OK ] Reached target Login Prompts. >>> Starting Crash recovery kernel arming... >>> [ OK ] Reached target Sockets. >>> Starting Import network configuration from initramfs... >>> Starting Tell Plymouth To Write Out Runtime Data... >>> [ OK ] Started Tell Plymouth To Write Out Runtime Data. >>> [ OK ] Found device >>> /dev/disk/by-uuid/13b9fbb1-f4bd-4db2-86d8-a802ceb87618. >>> Activating swap >>> /dev/disk/by-uuid/1...1-f4bd-4db2-86d8-a802ceb87618... >>> [ 21.646852] Adding 249852k swap on /dev/mmcblk0p3. Priority:-2 >>> extents:1 across:249852k SSFS >>> [ OK ] Activated swap >>> /dev/disk/by-uuid/13b9fbb1-f4bd-4db2-86d8-a802ceb87618. >>> [ OK ] Reached target Swap. >>> [FAILED] Failed to start Crash recovery kernel arming. >>> See 'systemctl status kdump.service' for details. >>> [ OK ] Started Import network configuration from initramfs. >>> [ OK ] Started Emergency Shell. >>> Starting Emergency Shell... >>> [ OK ] Reached target Emergency Mode. >>> Starting Create Volatile Files and Directories... >>> [ 23.733719] random: crng init done >>> [ 25.605825] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP813 found >>> [ OK ] Started Create Volatile Files and Directories. >>> Starting Security Auditing Service... >>> [ 25.816033] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded >>> [ OK ] Started Security Auditing Service. >>> Starting Update UTMP about System Boot/Shutdown... >>> [ OK ] Started Update UTMP about System Boot/Shutdown. >>> Starting Update UTMP about System Runlevel Changes... >>> [ OK ] Started Update UTMP about System Runlevel Changes. >>> Welcome to emergency mode! After logging in, type "journalctl -xPress >>> enter for maintenance(or type Control-D to continue): [ 26.911598] >>> input: axp20x-pek as >>> /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0 >>> [ 27.082356] ac100-rtc ac100-rtc: rtc core: registered rtc-ac100 as >>> rtc0 >>> [ 27.163368] ac100-rtc ac100-rtc: RTC enabled >>> [ 27.272882] usb-storage 1-1:1.0: USB Mass Storage device detected >>> [ 27.317836] scsi host0: usb-storage 1-1:1.0 >>> [ 27.372202] usbcore: registered new interface driver usb-storage >>> [ 27.510019] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif >>> mapping ok >>> [ 27.516919] asoc-simple-card sound: ASoC: no DMI vendor name! >>> [ 27.540329] usbcore: registered new interface driver uas >>> >>> sulogin: failed to execute /bin/bash: Permission denied >>> sulogin: failed to execute /bin/sh: Permission denied >>> Can not execute su shell >>> >>> Error getting authority: Error initializing authority: Could not >>> connect: No such file or directory (g-io-error-quark, 1) >>> [ 31.615654] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to >>> feature incompatibilities >>> Welcome to emergency mode! After logging in, type "journalctl -xPress >>> enter for maintenance(or type Control-D to continue): >>> sulogin: failed to execute /bin/bash: Permission denied >>> sulogin: failed to execute /bin/sh: Permission denied >>> Can not execute su shell >>> >

6 years, 8 months

Re: [CentOS-pt-br] Instalar virtualbox no centos 7

by Jean Pereira

On 01/21/2015 01:52 PM, Gabriel Franca wrote: > Quando olhei não achei muita coisa nele. Segue um bom trecho do dmesg. > tu tens o devel do kernel instalado? tens também as dependências de compilação instaladas? eu tenho ele instalado, e ainda no kernel 3.18.3 verifica também a versão dele, se está atualizado > [ 0.376277] efifb: scrolling: redraw > [ 0.376278] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > [ 0.378586] Console: switching to colour frame buffer device 200x56 > [ 0.380693] fb0: EFI VGA frame buffer device > [ 0.380697] intel_idle: MWAIT substates: 0x42120 > [ 0.380698] intel_idle: v0.4 model 0x3C > [ 0.380698] intel_idle: lapic_timer_reliable_states 0xffffffff > [ 0.380758] input: Power Button as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > [ 0.380761] ACPI: Power Button [PWRB] > [ 0.380778] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 0.380779] ACPI: Power Button [PWRF] > [ 0.380813] ACPI: Fan [FAN0] (off) > [ 0.380827] ACPI: Fan [FAN1] (off) > [ 0.380840] ACPI: Fan [FAN2] (off) > [ 0.380852] ACPI: Fan [FAN3] (off) > [ 0.380863] ACPI: Fan [FAN4] (off) > [ 0.380896] ACPI: Requesting acpi_cpufreq > [ 0.381261] thermal LNXTHERM:00: registered as thermal_zone0 > [ 0.381262] ACPI: Thermal Zone [TZ00] (28 C) > [ 0.381390] thermal LNXTHERM:01: registered as thermal_zone1 > [ 0.381391] ACPI: Thermal Zone [TZ01] (30 C) > [ 0.381409] GHES: HEST is not enabled! > [ 0.381449] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.401972] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.402257] Non-volatile memory driver v1.3 > [ 0.402259] Linux agpgart interface v0.103 > [ 0.402302] crash memory driver: version 1.1 > [ 0.402315] rdac: device handler registered > [ 0.402338] hp_sw: device handler registered > [ 0.402339] emc: device handler registered > [ 0.402340] alua: device handler registered > [ 0.402355] libphy: Fixed MDIO Bus: probed > [ 0.402380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.402382] ehci-pci: EHCI PCI platform driver > [ 0.402440] ehci-pci 0000:00:1a.0: EHCI Host Controller > [ 0.402465] ehci-pci 0000:00:1a.0: new USB bus registered, assigned > bus number 1 > [ 0.402474] ehci-pci 0000:00:1a.0: debug port 2 > [ 0.406366] ehci-pci 0000:00:1a.0: cache line size of 64 is not > supported > [ 0.406379] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000 > [ 0.412032] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > [ 0.412054] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 0.412056] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 0.412057] usb usb1: Product: EHCI Host Controller > [ 0.412058] usb usb1: Manufacturer: Linux 3.10.0-123.el7.x86_64 > ehci_hcd > [ 0.412058] usb usb1: SerialNumber: 0000:00:1a.0 > [ 0.412117] hub 1-0:1.0: USB hub found > [ 0.412120] hub 1-0:1.0: 2 ports detected > [ 0.412226] ehci-pci 0000:00:1d.0: EHCI Host Controller > [ 0.412250] ehci-pci 0000:00:1d.0: new USB bus registered, assigned > bus number 2 > [ 0.412260] ehci-pci 0000:00:1d.0: debug port 2 > [ 0.416160] ehci-pci 0000:00:1d.0: cache line size of 64 is not > supported > [ 0.416171] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 > [ 0.422032] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > [ 0.422049] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 0.422050] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 0.422051] usb usb2: Product: EHCI Host Controller > [ 0.422052] usb usb2: Manufacturer: Linux 3.10.0-123.el7.x86_64 > ehci_hcd > [ 0.422053] usb usb2: SerialNumber: 0000:00:1d.0 > [ 0.422111] hub 2-0:1.0: USB hub found > [ 0.422115] hub 2-0:1.0: 2 ports detected > [ 0.422183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.422184] ohci-pci: OHCI PCI platform driver > [ 0.422189] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.422258] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 0.422284] xhci_hcd 0000:00:14.0: new USB bus registered, assigned > bus number 3 > [ 0.422354] xhci_hcd 0000:00:14.0: cache line size of 64 is not > supported > [ 0.422368] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X > [ 0.422405] usb usb3: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 0.422406] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 0.422407] usb usb3: Product: xHCI Host Controller > [ 0.422408] usb usb3: Manufacturer: Linux 3.10.0-123.el7.x86_64 > xhci_hcd > [ 0.422409] usb usb3: SerialNumber: 0000:00:14.0 > [ 0.422458] hub 3-0:1.0: USB hub found > [ 0.422467] hub 3-0:1.0: 10 ports detected > [ 0.424009] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 0.424031] xhci_hcd 0000:00:14.0: new USB bus registered, assigned > bus number 4 > [ 0.424050] usb usb4: New USB device found, idVendor=1d6b, > idProduct=0003 > [ 0.424051] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 0.424052] usb usb4: Product: xHCI Host Controller > [ 0.424053] usb usb4: Manufacturer: Linux 3.10.0-123.el7.x86_64 > xhci_hcd > [ 0.424054] usb usb4: SerialNumber: 0000:00:14.0 > [ 0.424105] hub 4-0:1.0: USB hub found > [ 0.424109] hub 4-0:1.0: 2 ports detected > [ 0.428057] usbcore: registered new interface driver usbserial > [ 0.428061] usbcore: registered new interface driver usbserial_generic > [ 0.428065] usbserial: USB Serial support registered for generic > [ 0.428084] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] > at 0x60,0x64 irq 1,12 > [ 0.428425] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.428428] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 0.428470] mousedev: PS/2 mouse device common for all mice > [ 0.428557] rtc_cmos 00:06: RTC can wake from S4 > [ 0.428650] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > [ 0.428673] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes > nvram, hpet irqs > [ 0.428679] Intel P-state driver initializing. > [ 0.428686] Intel pstate controlling: cpu 0 > [ 0.428696] Intel pstate controlling: cpu 1 > [ 0.428702] Intel pstate controlling: cpu 2 > [ 0.428710] Intel pstate controlling: cpu 3 > [ 0.428772] cpuidle: using governor menu > [ 0.429060] EFI Variables Facility v0.08 2004-May-17 > [ 0.432153] hidraw: raw HID events driver (C) Jiri Kosina > [ 0.432198] usbcore: registered new interface driver usbhid > [ 0.432199] usbhid: USB HID core driver > [ 0.432217] drop_monitor: Initializing network drop monitor service > [ 0.432264] TCP: cubic registered > [ 0.432265] Initializing XFRM netlink socket > [ 0.432307] NET: Registered protocol family 10 > [ 0.432394] NET: Registered protocol family 17 > [ 0.432555] Loading compiled-in X.509 certificates > [ 0.432573] Loaded X.509 cert 'CentOS Linux kpatch signing key: > ea0413152cde1d98ebdca3fe6f0230904c9ef717' > [ 0.432582] Loaded X.509 cert 'CentOS Linux Driver update signing > key: 7f421ee0ab69461574bb358861dbe77762a4201b' > [ 0.432929] Loaded X.509 cert 'CentOS Linux kernel signing key: > bc83d0fe70c62fab1c58b4ebaa95e3936128fcf4' > [ 0.433053] EFI: Loaded cert 'Microsoft Windows Production PCA > 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to > '.system_keyring' > [ 0.433065] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: > 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring' > [ 0.433161] EFI: Loaded cert 'Red Hat Inc.: > 1ff96dd8d1b2327228c04b03a772dbb2dbb79b1f' linked to '.system_keyring' > [ 0.433241] registered taskstats version 1 > [ 0.434522] Key type trusted registered > [ 0.435694] Key type encrypted registered > [ 0.437223] IMA: No TPM chip found, activating TPM-bypass! > [ 0.437711] rtc_cmos 00:06: setting system clock to 2015-01-21 > 13:18:01 UTC (1421846281) > [ 0.438214] Freeing unused kernel memory: 1584k freed > [ 0.445940] systemd[1]: systemd 208 running in system mode. (+PAM > +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) > [ 0.446072] systemd[1]: Running in initial RAM disk. > [ 0.446107] systemd[1]: Set hostname to <lx-cenb.cenb.local>. > [ 0.448642] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input2 > [ 0.461386] systemd[1]: Expecting device > dev-disk-by\x2duuid-6212bbac\x2d61a9\x2d4f9a\x2d97a9\x2d6fa34a7b2606.device... > [ 0.461395] systemd[1]: Starting -.slice. > [ 0.461482] systemd[1]: Created slice -.slice. > [ 0.461505] systemd[1]: Starting System Slice. > [ 0.461544] systemd[1]: Created slice System Slice. > [ 0.461562] systemd[1]: Starting Slices. > [ 0.461567] systemd[1]: Reached target Slices. > [ 0.461582] systemd[1]: Starting Timers. > [ 0.461587] systemd[1]: Reached target Timers. > [ 0.461602] systemd[1]: Starting Journal Socket. > [ 0.461631] systemd[1]: Listening on Journal Socket. > [ 0.461715] systemd[1]: Starting dracut cmdline hook... > [ 0.461940] systemd[1]: Started Load Kernel Modules. > [ 0.461950] systemd[1]: Starting Setup Virtual Console... > [ 0.462151] systemd[1]: Starting Journal Service... > [ 0.462351] systemd[1]: Started Journal Service. > [ 0.464889] systemd-journald[105]: Vacuuming done, freed 0 bytes > [ 0.535418] device-mapper: uevent: version 1.0.3 > [ 0.535458] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) > initialised: dm-devel(a)redhat.com <mailto:dm-devel@redhat.com> > [ 0.552678] systemd-udevd[255]: starting version 208 > [ 0.571038] sky2: driver version 1.30 > [ 0.571055] sky2 0000:02:00.0: enabling device (0000 -> 0003) > [ 0.571127] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 > [ 0.571173] sky2 0000:02:00.0: irq 46 for MSI/MSI-X > [ 0.571458] sky2 0000:02:00.0 eth0: addr 00:50:43:00:45:3e > [ 0.572014] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 0.573556] ACPI: bus type ATA registered > [ 0.573891] libata version 3.00 loaded. > [ 0.574366] r8169 0000:03:00.0: irq 47 for MSI/MSI-X > [ 0.574439] [drm] Initialized drm 1.1.0 20060810 > [ 0.574492] r8169 0000:03:00.0 eth1: RTL8168g/8111g at > 0xffffc90000048000, 74:27:ea:7e:9a:3e, XID 0c000800 IRQ 47 > [ 0.574494] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 > bytes, tx checksumming: ko] > [ 0.575532] ahci 0000:00:1f.2: version 3.0 > [ 0.575626] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X > [ 0.575667] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 > Gbps 0x33 impl SATA mode > [ 0.575669] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum > part ems > [ 0.582134] scsi0 : ahci > [ 0.582216] scsi1 : ahci > [ 0.582260] scsi2 : ahci > [ 0.582302] scsi3 : ahci > [ 0.582436] scsi4 : ahci > [ 0.582555] scsi5 : ahci > [ 0.582624] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port > 0xf7e1a100 irq 48 > [ 0.582626] ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port > 0xf7e1a180 irq 48 > [ 0.582627] ata3: DUMMY > [ 0.582628] ata4: DUMMY > [ 0.582629] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port > 0xf7e1a300 irq 48 > [ 0.582631] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port > 0xf7e1a380 irq 48 > [ 0.586809] [drm] Memory usable by graphics device = 2048M > [ 0.586812] checking generic (e0000000 57f000) vs hw (e0000000 > 10000000) > [ 0.586813] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - > removing generic driver > [ 0.586832] Console: switching to colour dummy device 80x25 > [ 0.608828] i915 0000:00:02.0: irq 49 for MSI/MSI-X > [ 0.608834] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 0.608835] [drm] Driver supports precise vblank timestamp query. > [ 0.608876] vgaarb: device changed decodes: > PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 0.616159] systemd-udevd[263]: renamed network interface eth0 to > enp2s0 > [ 0.625136] systemd-udevd[258]: renamed network interface eth1 to > enp3s0 > [ 0.645342] fbcon: inteldrmfb (fb0) is primary device > [ 0.714011] usb 1-1: new high-speed USB device number 2 using ehci-pci > [ 0.810014] Console: switching to colour frame buffer device 200x56 > [ 0.812417] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 0.812418] i915 0000:00:02.0: registered panic notifier > [ 0.818293] acpi device:58: registered as cooling_device9 > [ 0.818317] ACPI: Video Device [GFX0] (multi-head: yes rom: no > post: no) > [ 0.818341] input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 > [ 0.818413] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 > on minor 0 > [ 0.828317] usb 1-1: New USB device found, idVendor=8087, > idProduct=8008 > [ 0.828319] usb 1-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 0.828453] hub 1-1:1.0: USB hub found > [ 0.828562] hub 1-1:1.0: 4 ports detected > [ 0.851536] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 > 64, EC=10 00 64 > [ 0.886980] ata6: SATA link down (SStatus 0 SControl 300) > [ 0.886996] ata2: SATA link down (SStatus 0 SControl 300) > [ 0.887953] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 0.887969] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 0.889289] ata1.00: ATA-8: ST31000524AS, JC4B, max UDMA/133 > [ 0.889292] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth > 31/32) > [ 0.890833] ata1.00: configured for UDMA/133 > [ 0.890949] scsi 0:0:0:0: Direct-Access ATA ST31000524AS > JC4B PQ: 0 ANSI: 5 > [ 0.895913] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) > succeeded > [ 0.895916] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE > LOCK) filtered out > [ 0.895918] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE > CONFIGURATION OVERLAY) filtered out > [ 0.896989] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN01, max > UDMA/133 > [ 0.901740] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) > succeeded > [ 0.901744] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE > LOCK) filtered out > [ 0.901746] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE > CONFIGURATION OVERLAY) filtered out > [ 0.902846] ata5.00: configured for UDMA/133 > [ 0.908633] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN01 PQ: > 0 ANSI: 5 > [ 0.913461] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: > (1.00 TB/931 GiB) > [ 0.913563] sd 0:0:0:0: [sda] Write Protect is off > [ 0.913566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 0.913590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 0.927218] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw > xa/form2 cdda tray > [ 0.927221] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 0.927326] sr 4:0:0:0: Attached scsi CD-ROM sr0 > [ 0.930944] usb 2-1: new high-speed USB device number 2 using ehci-pci > [ 0.957906] sda: sda1 sda2 sda3 > [ 0.958501] sd 0:0:0:0: [sda] Attached SCSI disk > [ 1.045263] usb 2-1: New USB device found, idVendor=8087, > idProduct=8000 > [ 1.045265] usb 2-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 1.045526] hub 2-1:1.0: USB hub found > [ 1.045622] hub 2-1:1.0: 6 ports detected > [ 1.298299] bio: create slab <bio-1> at 1 > [ 1.358816] tsc: Refined TSC clocksource calibration: 3092.838 MHz > [ 1.358820] Switching to clocksource tsc > [ 1.427899] input: ImPS/2 Generic Wheel Mouse as > /devices/platform/i8042/serio1/input/input4 > [ 1.638118] SGI XFS with ACLs, security attributes, large > block/inode numbers, no debug enabled > [ 1.655065] XFS (dm-1): Mounting Filesystem > [ 1.710838] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off > [ 1.730961] XFS (dm-1): Starting recovery (logdev: internal) > [ 1.800475] XFS (dm-1): Ending recovery (logdev: internal) > [ 2.043386] systemd-journald[105]: Received SIGTERM > [ 2.433172] SELinux: Disabled at runtime. > [ 2.433188] SELinux: Unregistering netfilter hooks > [ 2.453626] type=1404 audit(1421846283.515:2): selinux=0 > auid=4294967295 ses=4294967295 > [ 2.533548] systemd[1]: RTC configured in localtime, applying delta > of -120 minutes to system time. > [ 4.910823] systemd-journald[502]: Vacuuming done, freed 0 bytes > [ 5.418360] RPC: Registered named UNIX socket transport module. > [ 5.418362] RPC: Registered udp transport module. > [ 5.418363] RPC: Registered tcp transport module. > [ 5.418364] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 5.653811] Installing knfsd (copyright (C) 1996 okir(a)monad.swb.de > <mailto:okir@monad.swb.de>). > [ 5.825641] systemd-udevd[543]: starting version 208 > [ 5.948570] wmi: Mapper loaded > [ 6.091263] shpchp: Standard Hot Plug PCI Controller Driver > version: 0.4 > [ 6.091759] ACPI Warning: SystemIO range > 0x0000000000001828-0x000000000000182f conflicts with OpRegion > 0x0000000000001800-0x000000000000187f (\PMIO) (20130517/utaddress-254) > [ 6.091764] ACPI: If an ACPI driver is available for this device, > you should use it instead of the native driver > [ 6.091766] ACPI Warning: SystemIO range > 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion > 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20130517/utaddress-254) > [ 6.091768] ACPI Warning: SystemIO range > 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion > 0x0000000000001c00-0x0000000000001fff (\GPR_) (20130517/utaddress-254) > [ 6.091770] ACPI: If an ACPI driver is available for this device, > you should use it instead of the native driver > [ 6.091771] ACPI Warning: SystemIO range > 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion > 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20130517/utaddress-254) > [ 6.091773] ACPI Warning: SystemIO range > 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion > 0x0000000000001c00-0x0000000000001fff (\GPR_) (20130517/utaddress-254) > [ 6.091774] ACPI: If an ACPI driver is available for this device, > you should use it instead of the native driver > [ 6.091775] lpc_ich: Resource conflict(s) found affecting gpio_ich > [ 6.190543] input: PC Speaker as /devices/platform/pcspkr/input/input5 > [ 6.281317] ACPI Warning: SystemIO range > 0x000000000000f040-0x000000000000f05f conflicts with OpRegion > 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) > (20130517/utaddress-254) > [ 6.281322] ACPI: If an ACPI driver is available for this device, > you should use it instead of the native driver > [ 6.303804] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X > [ 6.655460] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) > [ 6.655572] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X > [ 6.655611] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) > [ 6.655671] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X > [ 6.665133] input: HDA Intel HDMI HDMI/DP,pcm=3 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input6 > [ 6.673355] input: HDA Intel PCH Front Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 > [ 6.673400] input: HDA Intel PCH Line Out as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 > [ 6.673425] input: HDA Intel PCH Line as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 > [ 6.673458] input: HDA Intel PCH Rear Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 > [ 6.673485] input: HDA Intel PCH Front Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 > [ 6.925676] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) > [ 6.975776] iTCO_vendor_support: vendor-support=0 > [ 6.976377] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 > [ 6.976400] iTCO_wdt: Found a Lynx Point TCO device (Version=2, > TCOBASE=0x1860) > [ 6.976486] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 7.155967] alg: No test for crc32 (crc32-pclmul) > [ 8.169504] XFS (sda2): Mounting Filesystem > [ 8.458500] Adding 8142844k swap on /dev/mapper/centos-swap. > Priority:-1 extents:1 across:8142844k FS > [ 8.613450] XFS (sda2): Ending clean mount > [ 8.805978] FAT-fs (sda1): Volume was not properly unmounted. Some > data may be corrupt. Please run fsck. > [ 9.016790] XFS (dm-2): Mounting Filesystem > [ 10.554513] XFS (dm-2): Ending clean mount > [ 10.701631] systemd-journald[502]: Received request to flush > runtime journal from PID 1 > [ 10.705642] type=1305 audit(1421853491.770:3): audit_pid=763 old=0 > auid=4294967295 ses=4294967295 res=1 > [ 11.221459] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 11.221482] sr 4:0:0:0: Attached scsi generic sg1 type 5 > [ 12.429406] sky2 0000:02:00.0 enp2s0: enabling interface > [ 12.429475] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready > [ 12.551950] r8169 0000:03:00.0 enp3s0: link down > [ 12.551965] r8169 0000:03:00.0 enp3s0: link down > [ 12.551987] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready > [ 14.201270] r8169 0000:03:00.0 enp3s0: link up > [ 14.201277] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready > [ 14.582011] Ebtables v2.0 registered > [ 14.587104] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 14.592056] ip6_tables: (C) 2000-2006 Netfilter Core Team > >> Em 21/01/2015, à(s) 13:48, Roberto Ferreira Lauretti >> <lauretti(a)ccuec.unicamp.br <mailto:lauretti@ccuec.unicamp.br>> escreveu: >> >> Boa tarde, >> >> Qual a mensagem de erro no dmesg? >> On 21-01-2015 13:46, Gabriel Franca wrote: >>> Boa Tarde Galera, >>> >>> Estou com uma dificuldade fiz a instalação do centos 7 atualizei e >>> estou tentando instalar e configurar o Virtualbox. >>> >>> fiz toda a instalação, mais quando executo o comando >>> /etc/init.d/vboxdrv setup tenho o seguinte retorno. >>> >>> /etc/init.d/vboxdrv setup >>> Stopping VirtualBox kernel modules [OK ] >>> Recompiling VirtualBox kernel modules [OK ] >>> Starting VirtualBox kernel modules [FALHOU] >>> (modprobe vboxdrv failed. Please use 'dmesg' to find out why) >>> >>> Alguém já conseguiu instalar o virtualbox no centos 7 ? >>> >>> Tentei esse tutorial tbm mais deu o mesmo erro. >>> >>> http://www.itzgeek.com/how-tos/linux/centos-how-tos/install-virtualbox-4-3-… >>> >>> >>> Atenciosamente, >>> >>> Gabriel Franca >>> >>> >>> _______________________________________________ >>> CentOS-pt-br mailing list >>> CentOS-pt-br(a)centos.org >>> http://lists.centos.org/mailman/listinfo/centos-pt-br >> >> _______________________________________________ >> CentOS-pt-br mailing list >> CentOS-pt-br(a)centos.org <mailto:CentOS-pt-br@centos.org> >> http://lists.centos.org/mailman/listinfo/centos-pt-br > > > > _______________________________________________ > CentOS-pt-br mailing list > CentOS-pt-br(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-pt-br

10 years, 3 months

[CentOS-virt] The Host cpu(s) in this machine do not have support for full virtualization

by Armando Montiel Caba

Hi, I'm geting this message from virt-manager. Server: SuperMicro X8SIL with INTEL X3440 Here is my logs /var/log/dmesg: Bootdata ok (command line is ro root=/dev/md2) Linux version 2.6.18-194.3.1.el5xen (mockbuild(a)builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu May 13 13:49:53 EDT 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000001dc26c000 (usable) On node 0 totalpages: 1950316 DMA zone: 1950316 pages, LIFO batch:31 DMI present. ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa110 ACPI: XSDT (v001 SMCI 0x20100225 MSFT 0x00000097) @ 0x00000000bf7a0100 ACPI: FADT (v003 022510 FACP1918 0x20100225 MSFT 0x00000097) @ 0x00000000bf7a0290 ACPI: MADT (v001 022510 APIC1918 0x20100225 MSFT 0x00000097) @ 0x00000000bf7a0390 ACPI: MCFG (v001 022510 OEMMCFG 0x20100225 MSFT 0x00000097) @ 0x00000000bf7a0430 ACPI: OEMB (v001 022510 OEMB1918 0x20100225 MSFT 0x00000097) @ 0x00000000bf7ae040 ACPI: HPET (v001 022510 OEMHPET 0x20100225 MSFT 0x00000097) @ 0x00000000bf7aa5f0 ACPI: GSCI (v001 022510 GMCHSCI 0x20100225 MSFT 0x00000097) @ 0x00000000bf7ae0c0 ACPI: DMAR (v001 AMI OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x00000000bf7b00f0 ACPI: SSDT (v001 DpgPmm CpuPm 0x00000012 INTL 0x20051117) @ 0x00000000bf7b2800 ACPI: EINJ (v001 AMIER AMI_EINJ 0x20100225 MSFT 0x00000097) @ 0x00000000bf7aa630 ACPI: BERT (v001 AMIER AMI_BERT 0x20100225 MSFT 0x00000097) @ 0x00000000bf7aa7c0 ACPI: ERST (v001 AMIER AMI_ERST 0x20100225 MSFT 0x00000097) @ 0x00000000bf7aa7f0 ACPI: HEST (v001 AMIER ABC_HEST 0x20100225 MSFT 0x00000097) @ 0x00000000bf7aa9a0 ACPI: DSDT (v001 10605 10605000 0x00000000 INTL 0x20051117) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) Built 1 zonelists. Total pages: 1950316 Kernel command line: ro root=/dev/md2 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2533.406 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: 0xffff88000a357000 - 0xffff88000e357000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 7563760k/7801264k available (2512k kernel code, 228628k reserved, 1396k data, 184k init) Calibrating delay using timer specific routine.. 6334.75 BogoMIPS (lpj=12669518) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 (SMP-)alternatives turned off ACPI: Core revision 20060707 Initializing CPU#1 Initializing CPU#2 Initializing CPU#3 Initializing CPU#4 Initializing CPU#5 Initializing CPU#6 Brought up 8 CPUs sizeof(vma)=168 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=216 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=248 bytes Initializing CPU#7 migration_cost=15 checking if image is initramfs... it is Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:08: ioport range 0x164e-0x164f has been reserved pnp: 00:09: ioport range 0xa00-0xa0f has been reserved pnp: 00:09: ioport range 0xa10-0xa1f has been reserved PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: d000-dfff MEM window: fb500000-fb5fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: e000-efff MEM window: fb600000-fb6fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: fb700000-fbffffff PREFETCH window 0x00000000fa000000-0x00000000faffffff GSI 16 sharing vector 0x98 and IRQ 16 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 GSI 17 sharing vector 0xA0 and IRQ 17 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) type=2000 audit(1277201045.924:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring - Added public key 7664334D64FC7447 - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:06:03.0 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1c.5 to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707] ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] [20060707] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3]) ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3]) Real Time Clock Driver v1.12ac hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones brd: module loaded Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Initalizing network drop monitor service Write protecting the kernel read-only data: 483k GSI 18 sharing vector 0xD0 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.0: debug port 2 PCI: cache line size of 32 is not supported by device 0000:00:1d.0 ehci_hcd 0000:00:1d.0: irq 18, io mem 0xfb4fc000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 md: raid1 personality registered for level 1 SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 GSI 19 sharing vector 0xD8 and IRQ 19 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19 ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19 usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 8 ports detected ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: WDC WD1002FBYS-02A6B0, 03.00C06, max UDMA/133 ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 Vendor: ATA Model: WDC WD1002FBYS-0 Rev: 03.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: WDC WD1002FBYS-0 Rev: 03.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: Attached scsi disk sdb ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] PCI: Setting latency timer of device 0000:00:1f.5 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19 ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel(a)redhat.com device-mapper: dm-raid45: initialized v0.2594l md: Autodetecting RAID arrays. md: autorun ... md: considering sdb3 ... md: adding sdb3 ... md: sdb2 has different UUID to sdb3 md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda2 has different UUID to sdb3 md: sda1 has different UUID to sdb3 md: created md2 md: bind<sda3> md: bind<sdb3> md: running: <sdb3><sda3> raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md1 md: bind<sda2> md: bind<sdb2> md: running: <sdb2><sda2> raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind<sda1> md: bind<sdb1> md: running: <sdb1><sda1> raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1277201077.722:2): selinux=0 auid=4294967295 ses=4294967295 input: PC Speaker as /class/input/input0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k3 e1000e: Copyright (c) 1999-2008 Intel Corporation. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:04:00.0 to 64 eth0: (PCI Express:2.5GB/s:Width x1) 00:25:90:04:78:74 eth0: Intel(R) PRO/1000 Network Connection eth0: MAC: 3, PHY: 8, PBA No: 0101ff-0ff ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:05:00.0 to 64 eth1: (PCI Express:2.5GB/s:Width x1) 00:25:90:04:78:75 eth1: Intel(R) PRO/1000 Network Connection eth1: MAC: 3, PHY: 8, PBA No: 0101ff-0ff GSI 20 sharing vector 0x51 and IRQ 20 ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 20 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled floppy0: no floppy controllers found lp: driver loaded but no devices found ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Mapper loaded dell-wmi: No known WMI GUID found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded loop: loaded (max 8 devices) EXT3 FS on md2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 8193016k swap on /dev/md1. Priority:-1 extents:1 across:8193016k* * # cat /var/log/xen/console/hypervisor.log (xm dmesg) __ __ _____ _ ____ _ ___ _ _ _____ _ _ ____ \ \/ /___ _ __ |___ / / | |___ \ / |/ _ \| || | |___ / / | ___| | ___| \ // _ \ '_ \ |_ \ | | __) |__| | (_) | || |_ |_ \ | | / _ \ |___ \ / \ __/ | | | ___) || |_ / __/|__| |\__, |__ _| ___) || || __/ |___) | /_/\_\___|_| |_| |____(_)_(_)_____| |_| /_/ |_|(_)____(_)_(_)___|_|____/ http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.1.2-194.3.1.el5 (mockbuild(a)centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) Thu May 13 12:59:18 EDT 2010 Latest ChangeSet: unavailable (XEN) Command line: (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 2 MBR signatures (XEN) Found 2 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009ec00 (usable) (XEN) 000000000009ec00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bf790000 (usable) (XEN) 00000000bf79e000 - 00000000bf7a0000 type 9 (XEN) 00000000bf7a0000 - 00000000bf7ae000 (ACPI data) (XEN) 00000000bf7ae000 - 00000000bf7d0000 (ACPI NVS) (XEN) 00000000bf7d0000 - 00000000bf7e0000 (reserved) (XEN) 00000000bf7ed000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fed20000 - 00000000fed40000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 0000000100000000 - 0000000240000000 (usable) (XEN) System RAM: 8183MB (8379576kB) (XEN) Xen heap: 13MB (13712kB) (XEN) Domain heap initialised: DMA width 32 bits (XEN) Processor #0 7:14 APIC version 21 (XEN) Processor #2 7:14 APIC version 21 (XEN) Processor #4 7:14 APIC version 21 (XEN) Processor #6 7:14 APIC version 21 (XEN) Processor #1 7:14 APIC version 21 (XEN) Processor #3 7:14 APIC version 21 (XEN) Processor #5 7:14 APIC version 21 (XEN) Processor #7 7:14 APIC version 21 (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2533.407 MHz processor. (XEN) , L1 D cache: 32K (XEN) VMX: VPID is available. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected and enabled. (XEN) VMX: MSR intercept bitmap enabled (XEN) I/O virtualisation disabled (XEN) CPU0: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05 (XEN) Booting processor 1/2 eip 90000 (XEN) , L1 D cache: 32K (XEN) VMX: VPID is available. (XEN) CPU1: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05 (XEN) Booting processor 2/4 eip 90000 (XEN) , L1 D cache: 32K (XEN) VMX: VPID is available. (XEN) CPU2: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05 (XEN) Booting processor 3/6 eip 90000 (XEN) , L1 D cache: 32K (XEN) VMX: VPID is available. (XEN) CPU3: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05 (XEN) Booting processor 4/1 eip 90000 (XEN) , L1 D cache: 32K (XEN) VMX: VPID is available. (XEN) CPU4: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05 (XEN) Booting processor 5/3 eip 90000 (XEN) , L1 D cache: 32K (XEN) VMX: VPID is available. (XEN) CPU5: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05 (XEN) Booting processor 6/5 eip 90000 (XEN) , L1 D cache: 32K (XEN) VMX: VPID is available. (XEN) CPU6: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05 (XEN) Booting processor 7/7 eip 90000 (XEN) , L1 D cache: 32K (XEN) VMX: VPID is available. (XEN) CPU7: Intel(R) Xeon(R) CPU X3440 @ 2.53GHz stepping 05 (XEN) Total of 8 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) Platform timer overflows in 14998 jiffies. (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 8 CPUs (XEN) xenoprof: Initialization failed. Intel processor model 30 for P6 class family is not supported (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0xffffffff80200000 memsz=0x2f3d70 (XEN) elf_parse_binary: phdr: paddr=0xffffffff804f3d80 memsz=0x14c510 (XEN) elf_parse_binary: phdr: paddr=0xffffffff80641000 memsz=0xc08 (XEN) elf_parse_binary: phdr: paddr=0xffffffff80642000 memsz=0x11becc (XEN) elf_parse_binary: memory: 0xffffffff80200000 -> 0xffffffff8075decc (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80206000 (XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0xffffffff80000000 (XEN) virt_offset = 0x0 (XEN) virt_kstart = 0xffffffff80200000 (XEN) virt_kend = 0xffffffff8075decc (XEN) virt_entry = 0xffffffff80200000 (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff8075decc (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000232000000->0000000234000000 (1940076 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff8075decc (XEN) Init. ramdisk: ffffffff8075e000->ffffffff80e0d800 (XEN) Phys-Mach map: ffffffff80e0e000->ffffffff81ceb360 (XEN) Start info: ffffffff81cec000->ffffffff81cec49c (XEN) Page tables: ffffffff81ced000->ffffffff81d00000 (XEN) Boot stack: ffffffff81d00000->ffffffff81d01000 (XEN) TOTAL: ffffffff80000000->ffffffff82000000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 8 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff804f3d70 (XEN) elf_load_binary: phdr 1 at 0xffffffff804f3d80 -> 0xffffffff80640290 (XEN) elf_load_binary: phdr 2 at 0xffffffff80641000 -> 0xffffffff80641c08 (XEN) elf_load_binary: phdr 3 at 0xffffffff80642000 -> 0xffffffff8067f0a8 (XEN) Initrd len 0x6af800, start at 0xffffffff8075e000 (XEN) Scrubbing Free RAM: ...done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). (XEN) Freed 112kB init memory. # rpm -qa | grep -i xen xen-libs-3.0.3-105.el5_5.3 xen-libs-3.0.3-105.el5_5.3 xen-3.0.3-105.el5_5.3 kernel-xen-2.6.18-194.3.1.el5 # rpm -qa | grep -i virt libvirt-0.6.3-33.el5 python-virtinst-0.400.3-9.el5 libvirt-python-0.6.3-33.el5 libvirt-0.6.3-33.el5 virt-manager-0.6.1-12.el5 virt-viewer-0.0.2-3.el5 # cat /var/log/xen/xend.log [2010-06-22 06:03:25 xend 3184] INFO (SrvDaemon:190) Xend stopped due to signal 15. [2010-06-22 06:05:02 xend 3166] INFO (SrvDaemon:283) Xend Daemon started [2010-06-22 06:05:02 xend 3166] INFO (SrvDaemon:287) Xend changeset: unavailable. [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG (XendDomainInfo:229) XendDomainInfo.recreate({'paused': 0, 'cpu_time': 11234791979L, 'ssidref': 0, 'hvm': 0, 'shutdown_reason': 0, 'dying': 0, 'mem_kb': 7793072L, 'domid': 0, 'max_vcpu_id': 7, 'crashed': 0, 'running': 1, 'maxmem_kb': 17179869180L, 'shutdown': 0, 'online_vcpus': 8, 'handle': [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0], 'blocked': 0}) [2010-06-22 06:05:02 xend.XendDomainInfo 3166] INFO (XendDomainInfo:241) Recreating domain 0, UUID 00000000-0000-0000-0000-000000000000. [2010-06-22 06:05:02 xend.XendDomainInfo 3166] WARNING (XendDomainInfo:263) No vm path in store for existing domain 0 [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG (XendDomainInfo:993) Storing VM details: {'shadow_memory': '0', 'uuid': '00000000-0000-0000-0000-000000000000', 'on_reboot': 'restart', 'on_poweroff': 'destroy', 'name': 'Domain-0', 'xend/restart_count': '0', 'vcpus': '8', 'vcpu_avail': '255', 'memory': '7611', 'on_crash': 'restart', 'maxmem': '7611'} [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG (XendDomainInfo:1028) Storing domain details: {'cpu/1/availability': 'online', 'cpu/3/availability': 'online', 'name': 'Domain-0', 'console/limit': '1048576', 'cpu/2/availability': 'online', 'vm': '/vm/00000000-0000-0000-0000-000000000000', 'domid': '0', 'cpu/7/availability': 'online', 'cpu/0/availability': 'online', 'memory/target': '7793664', 'cpu/5/availability': 'online', 'cpu/6/availability': 'online', 'cpu/4/availability': 'online'} [2010-06-22 06:05:02 xend 3166] DEBUG (XendDomain:164) number of vcpus to use is 0 [2010-06-22 06:05:02 xend 3166] INFO (SrvServer:116) unix path=/var/lib/xend/xend-socket [2010-06-22 06:05:02 xend.XendDomainInfo 3166] DEBUG (XendDomainInfo:1250) XendDomainInfo.handleShutdownWatch

14 years, 10 months

[CentOS] Trying to get a kernel dump

by Lists

Trying to debug a database server getting cpu softlocks causing SSHD to hang and not let anybody log in. Figured that a good first step would be to get some kernel dumps when the problem occurs. According to what I read at the following web site, I can get dumps for softlock problems too. Here's the site: http://blog.kreyolys.com/2011/03/17/no-panic-its-just-a-kernel-panic/ Using a throwaway 32 bit dev server, I followed the directions exactly with the below modifications. A) I got the kernel-debuginfo and kernel-debuginfo-common by enabling /etc/yum.repos.d/CentOS-Debuginfo.repo and then installing with yum. B) One other change is that I had to use an alternate partition instead of the one resolving "/var" because the server was set up with LVM. The partition that I used ("/dev/sdb3") is actually mounted at /alt/home. So when I simulate a crash by piping a "c" to /proc/sysrq-trigger, I see the following in /var/log/messages: May 30 13:37:24 norman kernel: SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) But nothing else. NO files in /var/crash, or /alt/home/var/crash (directory exists) Nothing happens at all when I run # echo 1 > /proc/sys/kernel/softlockup_panic I've tried tweaking a few settings in /etc/kdump.conf, restarting after each time (since it creates a new boot img) to no avail. What am I messing? Here's a bunch of hopefully relevant info: kernel line in grub.conf: kernel /vmlinuz-2.6.32-358.6.2.el6.i686 ro root=/dev/mapper/VolGroup-lv_root nomodeset rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto quiet rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM crashkernel=128M nmi_watchdog=1 # grep -v "#" /etc/kdump.conf ext4 /dev/sdb3 path /var/crash core_collector makedumpfile -c -d 31 # cat /proc/meminfo MemTotal: 379352 kB MemFree: 232748 kB Buffers: 22496 kB Cached: 79040 kB SwapCached: 0 kB Active: 60512 kB Inactive: 60152 kB Active(anon): 20028 kB Inactive(anon): 4640 kB Active(file): 40484 kB Inactive(file): 55512 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 379352 kB LowFree: 232748 kB SwapTotal: 1048568 kB SwapFree: 1048568 kB Dirty: 48 kB Writeback: 0 kB AnonPages: 19124 kB Mapped: 14320 kB Shmem: 5556 kB Slab: 16216 kB SReclaimable: 8444 kB SUnreclaim: 7772 kB KernelStack: 816 kB PageTables: 2188 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1238244 kB Committed_AS: 164964 kB VmallocTotal: 506396 kB VmallocUsed: 5344 kB VmallocChunk: 491856 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 9692 kB DirectMap2M: 514048 kB // IN sysctl.conf kernel.unknown_nmi_panic=1 kernel.panic_on_unrecovered_nmi=1 vm.panic_on_oom=1 kernel.sysrq = 1 # /cat/proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 1 model name : Intel(R) Pentium(R) 4 CPU 1.50GHz stepping : 2 cpu MHz : 1495.192 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm up pebs bts bogomips : 2990.38 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 32 bits virtual power management: # dmesg: Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-358.6.2.el6.i686 (mockbuild(a)c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu May 16 18:12:13 UTC 2013 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff77000 (usable) BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS) BIOS-e820: 000000001ff79000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.3 present. SMBIOS version 2.3 @ 0xF0430 DMI: Dell Computer Corporation OptiPlex GX240 /OptiPlex GX240 , BIOS A05 07/19/2002 e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x1ff77 max_arch_pfn = 0x400000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FE0000000 write-back 1 disabled 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-000000001ff77000 Using x86 segment limits to approximate NX protection 0000000000 - 0000200000 page 4k 0000200000 - 001fe00000 page 2M 001fe00000 - 001ff77000 page 4k kernel direct mapping tables up to 1ff77000 @ 7000-f000 RAMDISK: 1f211000 - 1ff66d6a ACPI: RSDP 000fd560 00014 (v00 DELL ) ACPI: RSDT 000fd574 00034 (v01 DELL GX240 00000008 ASL 00000061) ACPI: FACP 000fd5a8 00074 (v01 DELL GX240 00000008 ASL 00000061) ACPI: DSDT fffe3c22 02393 (v01 DELL dt_ex 00001000 MSFT 0100000D) ACPI: FACS 1ff77000 00040 ACPI: SSDT fffe60f2 000BA (v01 DELL st_ex 00001000 MSFT 0100000D) ACPI: APIC 000fd61c 0005C (v01 DELL GX240 00000008 ASL 00000061) ACPI: BOOT 000fd678 00028 (v01 DELL GX240 00000008 ASL 00000061) ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 511MB LOWMEM available. mapped low ram: 0 - 1ff77000 low ram: 0 - 1ff77000 node 0 low ram: 00000000 - 1ff77000 node 0 bootmap 00002000 - 00005ff0 (9 early reservations) ==> bootmem [0000000000 - 001ff77000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000c6f610] TEXT DATA BSS ==> [0000400000 - 0000c6f610] #4 [001f211000 - 001ff66d6a] RAMDISK ==> [001f211000 - 001ff66d6a] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000c70000 - 0000c78174] BRK ==> [0000c70000 - 0000c78174] #7 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] found SMP MP-table at [c00fe710] fe710 Reserving 128MB of memory at 16MB for crashkernel (System RAM: 511MB) Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x0001ff77 HighMem 0x0001ff77 -> 0x0001ff77 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x000000a0 0: 0x00000100 -> 0x0001ff77 On node 0 totalpages: 130838 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125848 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) Booting paravirtualized kernel on bare hardware NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @c9600000 s36088 r0 d21256 u1048576 pcpu-alloc: s36088 r0 d21256 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129815 Kernel command line: ro root=/dev/mapper/VolGroup-lv_root nomodeset rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto quiet rd_LVM_LV=VolGroup/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM crashkernel=128M nmi_watchdog=1 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (00000000:00000000) Memory: 364908k/523740k available (4419k kernel code, 158168k reserved, 2500k data, 512k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff600000 - 0xff800000 (2048 kB) vmalloc : 0xe0777000 - 0xff5fe000 ( 494 MB) lowmem : 0xc0000000 - 0xdff77000 ( 511 MB) .init : 0xc0ac3000 - 0xc0b43000 ( 512 kB) .data : 0xc0850ea8 - 0xc0ac2008 (2500 kB) .text : 0xc0400000 - 0xc0850ea8 (4419 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. NR_IRQS:2304 nr_irqs:424 Console: colour VGA+ 80x25 console [tty0] enabled allocated 1048576 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Fast TSC calibration using PIT Detected 1495.192 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2990.38 BogoMIPS (lpj=1495192) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio Initializing cgroup subsys perf_event Initializing cgroup subsys net_prio CPU0: Hyper-Threading is disabled mce: CPU supports 4 MCE banks CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20090903 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) 4 CPU 1.50GHz stepping 02 Performance Events: Netburst events, Netburst P4/Xeon PMU driver. ... version: 0 ... bit width: 40 ... generic registers: 18 ... value mask: 000000ffffffffff ... max period: 0000007fffffffff ... fixed-purpose events: 0 ... event mask: 000000000003ffff NMI watchdog enabled, takes one hw-pmu counter. Brought up 1 CPUs Total of 1 processors activated (2990.38 BogoMIPS). sizeof(vma)=100 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=508 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=184 bytes sizeof(task_struct)=1348 bytes devtmpfs: initialized PM: Registering ACPI NVS region at 1ff77000 (8192 bytes) regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfbe2e, last bus=2 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. HEST: Table not found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffdfffff] (ignored) pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] pci 0000:00:1f.2: reg 20: [io 0xff80-0xff9f] pci 0000:00:1f.3: reg 20: [io 0xdcd0-0xdcdf] pci 0000:00:1f.4: reg 20: [io 0xff60-0xff7f] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff] pci 0000:00:1f.5: reg 14: [io 0xdc40-0xdc7f] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff pref] pci 0000:01:00.0: reg 18: [mem 0xfb000000-0xfbffffff] pci 0000:01:00.0: reg 30: [mem 0x80000000-0x8001ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfdffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] pci 0000:02:0c.0: reg 10: [io 0xec80-0xecff] pci 0000:02:0c.0: reg 14: [mem 0xfe1ffc00-0xfe1ffc7f] pci 0000:02:0c.0: reg 30: [mem 0xfe200000-0xfe21ffff pref] pci 0000:02:0c.0: supports D1 D2 pci 0000:02:0c.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:0c.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfe100000-0xfe2fffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource jiffies pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x00100000-0x00ffffff] pnp 00:00: [mem 0x01000000-0x1ff76fff] pnp 00:00: [mem 0x000f0000-0x000fffff] pnp 00:00: [mem 0xfec00000-0xfec0ffff] pnp 00:00: [mem 0xfee00000-0xfee0ffff] pnp 00:00: [mem 0xffb00000-0xffbfffff] pnp 00:00: [mem 0xffc00000-0xffffffff] pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: [io 0x0080-0x009f] pnp 00:02: [io 0x0000-0x001f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: [dma 4] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0061] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:05: [io 0x0070-0x007f] pnp 00:05: [irq 8] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:06: [io 0x03f0-0x03f5] pnp 00:06: [io 0x03f7] pnp 00:06: [irq 6] pnp 00:06: [dma 2] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:07: [io 0x03f8-0x03ff] pnp 00:07: [irq 4] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:08: [io 0x02f8-0x02ff] pnp 00:08: [irq 3] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:09: [io 0x0378-0x037f] pnp 00:09: [io 0x0778-0x077f] pnp 00:09: [irq 7] pnp 00:09: [dma 0 disabled] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:0a: [io 0x0060] pnp 00:0a: [io 0x0064] pnp 00:0a: [io 0x0062-0x0063] pnp 00:0a: [io 0x0065-0x006f] pnp 00:0a: [io 0x00e0-0x00ef] pnp 00:0a: [io 0x0800-0x085f] pnp 00:0a: [io 0x0c00-0x0c7f] pnp 00:0a: [io 0x0860-0x08ff] pnp 00:0a: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] pnp 00:0a: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved system 00:00: [mem 0x01000000-0x1ff76fff] could not be reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved system 00:00: [mem 0xffc00000-0xffffffff] has been reserved system 00:0a: [io 0x0c00-0x0c7f] has been reserved Switching to clocksource acpi_pm pci 0000:01:00.0: no compatible bridge window for [mem 0x80000000-0x8001ffff pref] pci 0000:02:0c.0: address space collision: [mem 0xfe200000-0xfe21ffff pref] conflicts with PCI Bus 0000:02 [mem 0xfe100000-0xfe2fffff] PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x200fffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io disabled] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfdffffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref] pci 0000:02:0c.0: BAR 6: assigned [mem 0x20000000-0x2001ffff pref] pci 0000:00:1e.0: PCI bridge to [bus 02-02] pci 0000:00:1e.0: PCI bridge to [bus 02-02] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfe100000-0xfe2fffff] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x200fffff pref] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfdffffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe2fffff] pci_bus 0000:02: resource 2 [mem 0x20000000-0x200fffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1f.2: PCI INT D disabled alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 pci 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1f.4: PCI INT C disabled pci 0000:01:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 13655k freed Simple Boot Flag at 0x7a set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) type=2000 audit(1369944362.104:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 739 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 834D293187AE1760 - User ID: CentOS (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Interface detection failed ipmi_si: Unable to find any System Interface(s) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [VBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle ERST: Table is not found! GHES: HEST is not enabled! isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel i845 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf0000000 crash memory driver: version 1.1 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1f.2: setting latency timer to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ff80 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-358.6.2.el6.i686 uhci_hcd usb usb1: SerialNumber: 0000:00:1f.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1f.4: setting latency timer to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000ff60 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-358.6.2.el6.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:1f.4 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 242 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 rtc_cmos 00:05: setting system clock to 2013-05-30 20:06:03 UTC (1369944363) Initalizing network drop monitor service Freeing unused kernel memory: 512k freed Write protecting the kernel text: 4420k Write protecting the kernel read-only data: 1924k dracut: dracut-004-303.el6 Refined TSC clocksource calibration: 1495.148 MHz. Switching to clocksource tsc device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel(a)redhat.com udev: starting version 147 ACPI: WMI: Mapper loaded [drm] Initialized drm 1.1.0 20060810 dracut: Starting plymouth daemon ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata1.00: ATA-7: ST3500630A, 3.AAE, max UDMA/100 ata1.00: 976773168 sectors, multi 8: LBA48 ata2.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100 ata2.00: 976773168 sectors, multi 8: LBA48 ata2.00: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 ata2.00: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sdb1 sdb2 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk dracut: Scanning devices sda2 for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit dracut: inactive '/dev/VolGroup/lv_home' [414.27 GiB] inherit dracut: inactive '/dev/VolGroup/lv_swap' [1.00 GiB] inherit EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1369944367.063:2): selinux=0 auid=4294967295 ses=4294967295 dracut: dracut: Switching root udev: starting version 147 intel_rng: FWH not detected iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1f.5: setting latency timer to 64 intel8x0_measure_ac97_clock: measured 50922 usecs (4 samples) intel8x0: measured clock 78 rejected intel8x0_measure_ac97_clock: measured 50946 usecs (2852 samples) intel8x0: clocking to 41157 alloc irq_desc for 18 on node -1 alloc kstat_irqs on node -1 3c59x 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 3c59x: Donald Becker and others. 0000:02:0c.0: 3Com PCI 3c905C Tornado at e0ec0c00. dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ppdev: user-space parallel port driver EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: EXT4-fs (sdb2): warning: checktime reached, running e2fsck is recommended EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: EXT4-fs (sdb1): warning: checktime reached, running e2fsck is recommended EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: EXT4-fs (sdb3): warning: checktime reached, running e2fsck is recommended EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: Adding 1048568k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:1048568k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (5927 buckets, 23708 max) ip_tables: (C) 2000-2006 Netfilter Core Team eth0: setting full-duplex. eth0: no IPv6 routers present SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z) SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) thaw-filesystems(J) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)

11 years, 11 months

Re: [CentOS-pt-br] Instalar virtualbox no centos 7

by Rodrigo Cunha

Eu tive um problema parecido, o que ocorreu é que não tinha habilitado na bios da minha placa mãe o suporte a virtualização. Hoje, ela funciona normalmente. Veja se isso te ajuda: http://www.sysprobs.com/disable-enable-virtualization-technology-bios Abs 2015-01-21 17:50 GMT-02:00 Gabriel Franca <gabriel.franca(a)gmail.com>: > Boa Tarde Jean, > > já testei com os 2. > > No momento a versão do repositório e essa: > > rpm -qa |grep VirtualBox > *VirtualBox*-4.3-4.3.20_96996_el7-1.x86_64 > > > tentei também com o rpm que está na mesma versão. > > VirtualBox-4.3-4.3.20_96996_el7-1.x86_64.rpm > > é mesmo assim nada =\ voltei para o kernel default da instalação e nada =\ > > pode ser alguma coisa com a bios ? esse centos 7 foi instalado numa > maquina desktop com sistema uefi. > > Att, > > Gabriel Franca > > Em 21/01/2015, à(s) 16:58, Jean Pereira <admin(a)olostech.com> escreveu: > > > On 01/21/2015 03:34 PM, Gabriel Franca wrote: > > então tenho sim tanto o devel quanto o headers. > > acredito que seja alguma coisa com o centos 7. > > desabilitei o firewall e o selinux tbm e nada =\ > > no dmesg eu nao vi nada de erro tbm. > > Baixou o pacote ou está utilizando o repo? > > att, > > Gabriel Franca > > Em 21/01/2015, à(s) 15:17, Jean Pereira <admin(a)olostech.com> escreveu: > > On 01/21/2015 01:52 PM, Gabriel Franca wrote: > > Quando olhei não achei muita coisa nele. Segue um bom trecho do dmesg. > > tu tens o devel do kernel instalado? > tens também as dependências de compilação instaladas? > eu tenho ele instalado, e ainda no kernel 3.18.3 > verifica também a versão dele, se está atualizado > > [ 0.376277] efifb: scrolling: redraw > [ 0.376278] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > [ 0.378586] Console: switching to colour frame buffer device 200x56 > [ 0.380693] fb0: EFI VGA frame buffer device > [ 0.380697] intel_idle: MWAIT substates: 0x42120 > [ 0.380698] intel_idle: v0.4 model 0x3C > [ 0.380698] intel_idle: lapic_timer_reliable_states 0xffffffff > [ 0.380758] input: Power Button as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 > [ 0.380761] ACPI: Power Button [PWRB] > [ 0.380778] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 0.380779] ACPI: Power Button [PWRF] > [ 0.380813] ACPI: Fan [FAN0] (off) > [ 0.380827] ACPI: Fan [FAN1] (off) > [ 0.380840] ACPI: Fan [FAN2] (off) > [ 0.380852] ACPI: Fan [FAN3] (off) > [ 0.380863] ACPI: Fan [FAN4] (off) > [ 0.380896] ACPI: Requesting acpi_cpufreq > [ 0.381261] thermal LNXTHERM:00: registered as thermal_zone0 > [ 0.381262] ACPI: Thermal Zone [TZ00] (28 C) > [ 0.381390] thermal LNXTHERM:01: registered as thermal_zone1 > [ 0.381391] ACPI: Thermal Zone [TZ01] (30 C) > [ 0.381409] GHES: HEST is not enabled! > [ 0.381449] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.401972] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 0.402257] Non-volatile memory driver v1.3 > [ 0.402259] Linux agpgart interface v0.103 > [ 0.402302] crash memory driver: version 1.1 > [ 0.402315] rdac: device handler registered > [ 0.402338] hp_sw: device handler registered > [ 0.402339] emc: device handler registered > [ 0.402340] alua: device handler registered > [ 0.402355] libphy: Fixed MDIO Bus: probed > [ 0.402380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.402382] ehci-pci: EHCI PCI platform driver > [ 0.402440] ehci-pci 0000:00:1a.0: EHCI Host Controller > [ 0.402465] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus > number 1 > [ 0.402474] ehci-pci 0000:00:1a.0: debug port 2 > [ 0.406366] ehci-pci 0000:00:1a.0: cache line size of 64 is not > supported > [ 0.406379] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000 > [ 0.412032] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 > [ 0.412054] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 0.412056] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 0.412057] usb usb1: Product: EHCI Host Controller > [ 0.412058] usb usb1: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd > [ 0.412058] usb usb1: SerialNumber: 0000:00:1a.0 > [ 0.412117] hub 1-0:1.0: USB hub found > [ 0.412120] hub 1-0:1.0: 2 ports detected > [ 0.412226] ehci-pci 0000:00:1d.0: EHCI Host Controller > [ 0.412250] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus > number 2 > [ 0.412260] ehci-pci 0000:00:1d.0: debug port 2 > [ 0.416160] ehci-pci 0000:00:1d.0: cache line size of 64 is not > supported > [ 0.416171] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 > [ 0.422032] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > [ 0.422049] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 0.422050] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 0.422051] usb usb2: Product: EHCI Host Controller > [ 0.422052] usb usb2: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd > [ 0.422053] usb usb2: SerialNumber: 0000:00:1d.0 > [ 0.422111] hub 2-0:1.0: USB hub found > [ 0.422115] hub 2-0:1.0: 2 ports detected > [ 0.422183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.422184] ohci-pci: OHCI PCI platform driver > [ 0.422189] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.422258] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 0.422284] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus > number 3 > [ 0.422354] xhci_hcd 0000:00:14.0: cache line size of 64 is not > supported > [ 0.422368] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X > [ 0.422405] usb usb3: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 0.422406] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 0.422407] usb usb3: Product: xHCI Host Controller > [ 0.422408] usb usb3: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd > [ 0.422409] usb usb3: SerialNumber: 0000:00:14.0 > [ 0.422458] hub 3-0:1.0: USB hub found > [ 0.422467] hub 3-0:1.0: 10 ports detected > [ 0.424009] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 0.424031] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus > number 4 > [ 0.424050] usb usb4: New USB device found, idVendor=1d6b, > idProduct=0003 > [ 0.424051] usb usb4: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 0.424052] usb usb4: Product: xHCI Host Controller > [ 0.424053] usb usb4: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd > [ 0.424054] usb usb4: SerialNumber: 0000:00:14.0 > [ 0.424105] hub 4-0:1.0: USB hub found > [ 0.424109] hub 4-0:1.0: 2 ports detected > [ 0.428057] usbcore: registered new interface driver usbserial > [ 0.428061] usbcore: registered new interface driver usbserial_generic > [ 0.428065] usbserial: USB Serial support registered for generic > [ 0.428084] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at > 0x60,0x64 irq 1,12 > [ 0.428425] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.428428] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 0.428470] mousedev: PS/2 mouse device common for all mice > [ 0.428557] rtc_cmos 00:06: RTC can wake from S4 > [ 0.428650] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > [ 0.428673] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes > nvram, hpet irqs > [ 0.428679] Intel P-state driver initializing. > [ 0.428686] Intel pstate controlling: cpu 0 > [ 0.428696] Intel pstate controlling: cpu 1 > [ 0.428702] Intel pstate controlling: cpu 2 > [ 0.428710] Intel pstate controlling: cpu 3 > [ 0.428772] cpuidle: using governor menu > [ 0.429060] EFI Variables Facility v0.08 2004-May-17 > [ 0.432153] hidraw: raw HID events driver (C) Jiri Kosina > [ 0.432198] usbcore: registered new interface driver usbhid > [ 0.432199] usbhid: USB HID core driver > [ 0.432217] drop_monitor: Initializing network drop monitor service > [ 0.432264] TCP: cubic registered > [ 0.432265] Initializing XFRM netlink socket > [ 0.432307] NET: Registered protocol family 10 > [ 0.432394] NET: Registered protocol family 17 > [ 0.432555] Loading compiled-in X.509 certificates > [ 0.432573] Loaded X.509 cert 'CentOS Linux kpatch signing key: > ea0413152cde1d98ebdca3fe6f0230904c9ef717' > [ 0.432582] Loaded X.509 cert 'CentOS Linux Driver update signing key: > 7f421ee0ab69461574bb358861dbe77762a4201b' > [ 0.432929] Loaded X.509 cert 'CentOS Linux kernel signing key: > bc83d0fe70c62fab1c58b4ebaa95e3936128fcf4' > [ 0.433053] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: > a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.system_keyring' > [ 0.433065] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: > 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring' > [ 0.433161] EFI: Loaded cert 'Red Hat Inc.: > 1ff96dd8d1b2327228c04b03a772dbb2dbb79b1f' linked to '.system_keyring' > [ 0.433241] registered taskstats version 1 > [ 0.434522] Key type trusted registered > [ 0.435694] Key type encrypted registered > [ 0.437223] IMA: No TPM chip found, activating TPM-bypass! > [ 0.437711] rtc_cmos 00:06: setting system clock to 2015-01-21 13:18:01 > UTC (1421846281) > [ 0.438214] Freeing unused kernel memory: 1584k freed > [ 0.445940] systemd[1]: systemd 208 running in system mode. (+PAM > +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) > [ 0.446072] systemd[1]: Running in initial RAM disk. > [ 0.446107] systemd[1]: Set hostname to <lx-cenb.cenb.local>. > [ 0.448642] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input2 > [ 0.461386] systemd[1]: Expecting device > dev-disk-by\x2duuid-6212bbac\x2d61a9\x2d4f9a\x2d97a9\x2d6fa34a7b2606.device... > [ 0.461395] systemd[1]: Starting -.slice. > [ 0.461482] systemd[1]: Created slice -.slice. > [ 0.461505] systemd[1]: Starting System Slice. > [ 0.461544] systemd[1]: Created slice System Slice. > [ 0.461562] systemd[1]: Starting Slices. > [ 0.461567] systemd[1]: Reached target Slices. > [ 0.461582] systemd[1]: Starting Timers. > [ 0.461587] systemd[1]: Reached target Timers. > [ 0.461602] systemd[1]: Starting Journal Socket. > [ 0.461631] systemd[1]: Listening on Journal Socket. > [ 0.461715] systemd[1]: Starting dracut cmdline hook... > [ 0.461940] systemd[1]: Started Load Kernel Modules. > [ 0.461950] systemd[1]: Starting Setup Virtual Console... > [ 0.462151] systemd[1]: Starting Journal Service... > [ 0.462351] systemd[1]: Started Journal Service. > [ 0.464889] systemd-journald[105]: Vacuuming done, freed 0 bytes > [ 0.535418] device-mapper: uevent: version 1.0.3 > [ 0.535458] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: > dm-devel(a)redhat.com > [ 0.552678] systemd-udevd[255]: starting version 208 > [ 0.571038] sky2: driver version 1.30 > [ 0.571055] sky2 0000:02:00.0: enabling device (0000 -> 0003) > [ 0.571127] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 > [ 0.571173] sky2 0000:02:00.0: irq 46 for MSI/MSI-X > [ 0.571458] sky2 0000:02:00.0 eth0: addr 00:50:43:00:45:3e > [ 0.572014] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 0.573556] ACPI: bus type ATA registered > [ 0.573891] libata version 3.00 loaded. > [ 0.574366] r8169 0000:03:00.0: irq 47 for MSI/MSI-X > [ 0.574439] [drm] Initialized drm 1.1.0 20060810 > [ 0.574492] r8169 0000:03:00.0 eth1: RTL8168g/8111g at > 0xffffc90000048000, 74:27:ea:7e:9a:3e, XID 0c000800 IRQ 47 > [ 0.574494] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 > bytes, tx checksumming: ko] > [ 0.575532] ahci 0000:00:1f.2: version 3.0 > [ 0.575626] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X > [ 0.575667] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps > 0x33 impl SATA mode > [ 0.575669] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum > part ems > [ 0.582134] scsi0 : ahci > [ 0.582216] scsi1 : ahci > [ 0.582260] scsi2 : ahci > [ 0.582302] scsi3 : ahci > [ 0.582436] scsi4 : ahci > [ 0.582555] scsi5 : ahci > [ 0.582624] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port > 0xf7e1a100 irq 48 > [ 0.582626] ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port > 0xf7e1a180 irq 48 > [ 0.582627] ata3: DUMMY > [ 0.582628] ata4: DUMMY > [ 0.582629] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port > 0xf7e1a300 irq 48 > [ 0.582631] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port > 0xf7e1a380 irq 48 > [ 0.586809] [drm] Memory usable by graphics device = 2048M > [ 0.586812] checking generic (e0000000 57f000) vs hw (e0000000 10000000) > [ 0.586813] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - > removing generic driver > [ 0.586832] Console: switching to colour dummy device 80x25 > [ 0.608828] i915 0000:00:02.0: irq 49 for MSI/MSI-X > [ 0.608834] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [ 0.608835] [drm] Driver supports precise vblank timestamp query. > [ 0.608876] vgaarb: device changed decodes: > PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 0.616159] systemd-udevd[263]: renamed network interface eth0 to enp2s0 > [ 0.625136] systemd-udevd[258]: renamed network interface eth1 to enp3s0 > [ 0.645342] fbcon: inteldrmfb (fb0) is primary device > [ 0.714011] usb 1-1: new high-speed USB device number 2 using ehci-pci > [ 0.810014] Console: switching to colour frame buffer device 200x56 > [ 0.812417] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 0.812418] i915 0000:00:02.0: registered panic notifier > [ 0.818293] acpi device:58: registered as cooling_device9 > [ 0.818317] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: > no) > [ 0.818341] input: Video Bus as > /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 > [ 0.818413] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on > minor 0 > [ 0.828317] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 > [ 0.828319] usb 1-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 0.828453] hub 1-1:1.0: USB hub found > [ 0.828562] hub 1-1:1.0: 4 ports detected > [ 0.851536] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, > EC=10 00 64 > [ 0.886980] ata6: SATA link down (SStatus 0 SControl 300) > [ 0.886996] ata2: SATA link down (SStatus 0 SControl 300) > [ 0.887953] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 0.887969] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 0.889289] ata1.00: ATA-8: ST31000524AS, JC4B, max UDMA/133 > [ 0.889292] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth > 31/32) > [ 0.890833] ata1.00: configured for UDMA/133 > [ 0.890949] scsi 0:0:0:0: Direct-Access ATA ST31000524AS > JC4B PQ: 0 ANSI: 5 > [ 0.895913] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) > succeeded > [ 0.895916] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE > LOCK) filtered out > [ 0.895918] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE > CONFIGURATION OVERLAY) filtered out > [ 0.896989] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN01, max UDMA/133 > [ 0.901740] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) > succeeded > [ 0.901744] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE > LOCK) filtered out > [ 0.901746] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE > CONFIGURATION OVERLAY) filtered out > [ 0.902846] ata5.00: configured for UDMA/133 > [ 0.908633] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 > LN01 PQ: 0 ANSI: 5 > [ 0.913461] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 > TB/931 GiB) > [ 0.913563] sd 0:0:0:0: [sda] Write Protect is off > [ 0.913566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 0.913590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 0.927218] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 > cdda tray > [ 0.927221] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 0.927326] sr 4:0:0:0: Attached scsi CD-ROM sr0 > [ 0.930944] usb 2-1: new high-speed USB device number 2 using ehci-pci > [ 0.957906] sda: sda1 sda2 sda3 > [ 0.958501] sd 0:0:0:0: [sda] Attached SCSI disk > [ 1.045263] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 > [ 1.045265] usb 2-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 1.045526] hub 2-1:1.0: USB hub found > [ 1.045622] hub 2-1:1.0: 6 ports detected > [ 1.298299] bio: create slab <bio-1> at 1 > [ 1.358816] tsc: Refined TSC clocksource calibration: 3092.838 MHz > [ 1.358820] Switching to clocksource tsc > [ 1.427899] input: ImPS/2 Generic Wheel Mouse as > /devices/platform/i8042/serio1/input/input4 > [ 1.638118] SGI XFS with ACLs, security attributes, large block/inode > numbers, no debug enabled > [ 1.655065] XFS (dm-1): Mounting Filesystem > [ 1.710838] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off > [ 1.730961] XFS (dm-1): Starting recovery (logdev: internal) > [ 1.800475] XFS (dm-1): Ending recovery (logdev: internal) > [ 2.043386] systemd-journald[105]: Received SIGTERM > [ 2.433172] SELinux: Disabled at runtime. > [ 2.433188] SELinux: Unregistering netfilter hooks > [ 2.453626] type=1404 audit(1421846283.515:2): selinux=0 > auid=4294967295 ses=4294967295 > [ 2.533548] systemd[1]: RTC configured in localtime, applying delta of > -120 minutes to system time. > [ 4.910823] systemd-journald[502]: Vacuuming done, freed 0 bytes > [ 5.418360] RPC: Registered named UNIX socket transport module. > [ 5.418362] RPC: Registered udp transport module. > [ 5.418363] RPC: Registered tcp transport module. > [ 5.418364] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 5.653811] Installing knfsd (copyright (C) 1996 okir(a)monad.swb.de) > [ 5.825641] systemd-udevd[543]: starting version 208 > [ 5.948570] wmi: Mapper loaded > [ 6.091263] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 6.091759] ACPI Warning: SystemIO range > 0x0000000000001828-0x000000000000182f conflicts with OpRegion > 0x0000000000001800-0x000000000000187f (\PMIO) (20130517/utaddress-254) > [ 6.091764] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 6.091766] ACPI Warning: SystemIO range > 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion > 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20130517/utaddress-254) > [ 6.091768] ACPI Warning: SystemIO range > 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion > 0x0000000000001c00-0x0000000000001fff (\GPR_) (20130517/utaddress-254) > [ 6.091770] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 6.091771] ACPI Warning: SystemIO range > 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion > 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20130517/utaddress-254) > [ 6.091773] ACPI Warning: SystemIO range > 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion > 0x0000000000001c00-0x0000000000001fff (\GPR_) (20130517/utaddress-254) > [ 6.091774] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 6.091775] lpc_ich: Resource conflict(s) found affecting gpio_ich > [ 6.190543] input: PC Speaker as /devices/platform/pcspkr/input/input5 > [ 6.281317] ACPI Warning: SystemIO range > 0x000000000000f040-0x000000000000f05f conflicts with OpRegion > 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) > (20130517/utaddress-254) > [ 6.281322] ACPI: If an ACPI driver is available for this device, you > should use it instead of the native driver > [ 6.303804] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X > [ 6.655460] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) > [ 6.655572] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X > [ 6.655611] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) > [ 6.655671] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X > [ 6.665133] input: HDA Intel HDMI HDMI/DP,pcm=3 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input6 > [ 6.673355] input: HDA Intel PCH Front Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 > [ 6.673400] input: HDA Intel PCH Line Out as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 > [ 6.673425] input: HDA Intel PCH Line as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 > [ 6.673458] input: HDA Intel PCH Rear Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 > [ 6.673485] input: HDA Intel PCH Front Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 > [ 6.925676] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) > [ 6.975776] iTCO_vendor_support: vendor-support=0 > [ 6.976377] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 > [ 6.976400] iTCO_wdt: Found a Lynx Point TCO device (Version=2, > TCOBASE=0x1860) > [ 6.976486] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 7.155967] alg: No test for crc32 (crc32-pclmul) > [ 8.169504] XFS (sda2): Mounting Filesystem > [ 8.458500] Adding 8142844k swap on /dev/mapper/centos-swap. > Priority:-1 extents:1 across:8142844k FS > [ 8.613450] XFS (sda2): Ending clean mount > [ 8.805978] FAT-fs (sda1): Volume was not properly unmounted. Some data > may be corrupt. Please run fsck. > [ 9.016790] XFS (dm-2): Mounting Filesystem > [ 10.554513] XFS (dm-2): Ending clean mount > [ 10.701631] systemd-journald[502]: Received request to flush runtime > journal from PID 1 > [ 10.705642] type=1305 audit(1421853491.770:3): audit_pid=763 old=0 > auid=4294967295 ses=4294967295 res=1 > [ 11.221459] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 11.221482] sr 4:0:0:0: Attached scsi generic sg1 type 5 > [ 12.429406] sky2 0000:02:00.0 enp2s0: enabling interface > [ 12.429475] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready > [ 12.551950] r8169 0000:03:00.0 enp3s0: link down > [ 12.551965] r8169 0000:03:00.0 enp3s0: link down > [ 12.551987] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready > [ 14.201270] r8169 0000:03:00.0 enp3s0: link up > [ 14.201277] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready > [ 14.582011] Ebtables v2.0 registered > [ 14.587104] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 14.592056] ip6_tables: (C) 2000-2006 Netfilter Core Team > > Em 21/01/2015, à(s) 13:48, Roberto Ferreira Lauretti < > lauretti(a)ccuec.unicamp.br> escreveu: > > Boa tarde, > > Qual a mensagem de erro no dmesg? > On 21-01-2015 13:46, Gabriel Franca wrote: > > Boa Tarde Galera, > > Estou com uma dificuldade fiz a instalação do centos 7 atualizei e estou > tentando instalar e configurar o Virtualbox. > > fiz toda a instalação, mais quando executo o comando /etc/init.d/vboxdrv > setup tenho o seguinte retorno. > > /etc/init.d/vboxdrv setup > Stopping VirtualBox kernel modules [ OK ] > Recompiling VirtualBox kernel modules [ OK ] > Starting VirtualBox kernel modules [FALHOU] > (modprobe vboxdrv failed. Please use 'dmesg' to find out why) > > Alguém já conseguiu instalar o virtualbox no centos 7 ? > > Tentei esse tutorial tbm mais deu o mesmo erro. > > > http://www.itzgeek.com/how-tos/linux/centos-how-tos/install-virtualbox-4-3-… > > > Atenciosamente, > > Gabriel Franca > > > _______________________________________________ > CentOS-pt-br mailing listCentOS-pt-br@centos.orghttp://lists.centos.org/mailman/listinfo/centos-pt-br > > > _______________________________________________ > CentOS-pt-br mailing list > CentOS-pt-br(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-pt-br > > > > > _______________________________________________ > CentOS-pt-br mailing listCentOS-pt-br@centos.orghttp://lists.centos.org/mailman/listinfo/centos-pt-br > > > _______________________________________________ > CentOS-pt-br mailing list > CentOS-pt-br(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-pt-br > > > > > _______________________________________________ > CentOS-pt-br mailing listCentOS-pt-br@centos.orghttp://lists.centos.org/mailman/listinfo/centos-pt-br > > > _______________________________________________ > CentOS-pt-br mailing list > CentOS-pt-br(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-pt-br > > > > _______________________________________________ > CentOS-pt-br mailing list > CentOS-pt-br(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-pt-br > > -- Atenciosamente, Rodrigo da Silva Cunha

10 years, 3 months

Re: [CentOS-es] ayudar servidor se me apaga

by Carlos Restrepo

Prueba con lo siguiente: - Actualiza el firmware de ese servidor - Actualiza el SO 2015-01-07 10:20 GMT-05:00 Guillermo Henríquez <guillermomagno(a)gmail.com>: > Amigos: > > Necesito ayuda, un servidor se me apaga, con el mensaje shutting down for > system halt y luego al arrancalo muestra el sig. log: > > > kernel: Linux version 2.6.18-348.1.1.el5 (mockbuild(a)builder10.centos.org) > (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jan 22 16:19:19 > EST 2013 > kernel: Command line: ro root=/dev/md2 > kernel: BIOS-provided physical RAM map: > kernel: BIOS-e820: 0000000000010000 - 0000000000093800 (usable) > kernel: BIOS-e820: 0000000000093800 - 0000000000093c00 (reserved) > kernel: BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved) > kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > kernel: BIOS-e820: 0000000000100000 - 000000007d7d4000 (usable) > kernel: BIOS-e820: 000000007d7d4000 - 000000007d7de000 (ACPI data) > kernel: BIOS-e820: 000000007d7de000 - 000000007d7df000 (usable) > kernel: BIOS-e820: 000000007d7df000 - 0000000080000000 (reserved) > kernel: BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) > kernel: BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) > kernel: BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) > kernel: DMI 2.7 present. > kernel: No NUMA configuration found > kernel: Faking a node at 0000000000000000-000000007d7df000 > kernel: Bootmem setup node 0 0000000000000000-000000007d7df000 > kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range > kernel: disabling kdump > kernel: ACPI: PM-Timer IO Port: 0x908 > kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > kernel: Processor #0 7:10 APIC version 21 > kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > kernel: Processor #2 7:10 APIC version 21 > kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) > kernel: Processor #4 7:10 APIC version 21 > kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) > kernel: Processor #6 7:10 APIC version 21 > kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) > last message repeated 59 times > kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > kernel: Setting APIC routing to physical flat > kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000 > kernel: Using ACPI (MADT) for SMP configuration information > kernel: Nosave address range: 0000000000093000 - 0000000000094000 > kernel: Nosave address range: 0000000000093000 - 0000000000098000 > kernel: Nosave address range: 0000000000098000 - 00000000000a0000 > kernel: Nosave address range: 00000000000a0000 - 00000000000f0000 > kernel: Nosave address range: 00000000000f0000 - 0000000000100000 > kernel: Nosave address range: 000000007d7d4000 - 000000007d7de000 > kernel: Allocating PCI resources starting at 88000000 (gap: > 80000000:74000000) > kernel: SMP: Allowing 64 CPUs, 60 hotplug CPUs > kernel: Built 1 zonelists. Total pages: 505346 > kernel: Kernel command line: ro root=/dev/md2 > kernel: Initializing CPU#0 > kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) > kernel: Console: colour VGA+ 80x25 > kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > kernel: Checking aperture... > kernel: Memory: 2012576k/2056060k available (2627k kernel code, 42944k > reserved, 1677k data, 224k init) > kernel: Calibrating delay loop (skipped), value calculated using timer > frequency.. 6186.24 BogoMIPS (lpj=3093121) > kernel: Security Framework v1.0.0 initialized > kernel: SELinux: Initializing. > kernel: selinux_register_security: Registering secondary module capability > kernel: Capability LSM initialized as secondary > kernel: Mount-cache hash table entries: 256 > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K > kernel: CPU: L2 cache: 256K > kernel: CPU: L3 cache: 8192K > kernel: using mwait in idle threads. > kernel: CPU: Physical Processor ID: 0 > kernel: CPU: Processor Core ID: 0 > kernel: MCE: Machine Check Exception Reporting is disabled. > kernel: SMP alternatives: switching to UP code > kernel: ACPI: Core revision 20060707 > kernel: Using local APIC timer interrupts. > kernel: Detected 6.236 MHz APIC timer. > kernel: SMP alternatives: switching to SMP code > kernel: Booting processor 1/4 APIC 0x2 > kernel: Initializing CPU#1 > kernel: Calibrating delay using timer specific routine.. 6185.87 BogoMIPS > (lpj=3092938) > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K > kernel: CPU: L2 cache: 256K > kernel: CPU: L3 cache: 8192K > kernel: CPU: Physical Processor ID: 0 > kernel: CPU: Processor Core ID: 1 > kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 > kernel: SMP alternatives: switching to SMP code > kernel: Booting processor 2/4 APIC 0x4 > kernel: Initializing CPU#2 > kernel: Calibrating delay using timer specific routine.. 6185.88 BogoMIPS > (lpj=3092941) > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K > kernel: CPU: L2 cache: 256K > kernel: CPU: L3 cache: 8192K > kernel: CPU: Physical Processor ID: 0 > kernel: CPU: Processor Core ID: 2 > kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 > kernel: SMP alternatives: switching to SMP code > kernel: Booting processor 3/4 APIC 0x6 > kernel: Initializing CPU#3 > kernel: Calibrating delay using timer specific routine.. 6185.86 BogoMIPS > (lpj=3092932) > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K > kernel: CPU: L2 cache: 256K > kernel: CPU: L3 cache: 8192K > kernel: CPU: Physical Processor ID: 0 > kernel: CPU: Processor Core ID: 3 > kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 > kernel: Brought up 4 CPUs > kernel: NMI watchdog testing PASSED. > kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. > kernel: time.c: Detected 3093.121 MHz processor. > kernel: migration_cost=23 > kernel: checking if image is initramfs... it is > kernel: Freeing initrd memory: 2693k freed > kernel: NET: Registered protocol family 16 > kernel: ACPI: bus type pci registered > kernel: Warning: pci_mmcfg_init marking 256MB space uncacheable. > kernel: MCFG table requires 64MB uncacheable only. Try booting with > acpi_mcfg_max_pci_bus_num=on > kernel: PCI: Using MMCONFIG at f4000000 > kernel: ACPI: Interpreter enabled > kernel: ACPI: Using IOAPIC for interrupt routing > kernel: ACPI: No dock devices found. > kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) > kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] > kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] > kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] > kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] (subtractive decode) > kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) > kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) > kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. > kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) > kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) > kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4 > kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled. > kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled. > kernel: Linux Plug and Play Support v0.97 (c) Adam Belay > kernel: pnp: PnP ACPI init > kernel: pnp: PnP ACPI: found 10 devices > kernel: usbcore: registered new driver usbfs > kernel: usbcore: registered new driver hub > kernel: PCI: Using ACPI for IRQ routing > kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, > post a report > kernel: NetLabel: Initializing > kernel: NetLabel: domain hash size = 128 > kernel: NetLabel: protocols = UNLABELED CIPSOv4 > kernel: NetLabel: unlabeled traffic allowed by default > kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, > 0, 0, 0, 0, 0, 0 > kernel: hpet0: 8 64-bit timers, 14318180 Hz > kernel: DMAR:Host address width 39 > kernel: DMAR:DRHD base: 0x000000fed90000 flags: 0x1 > kernel: IOMMU fed90000: ver 1:0 cap c9008020660262 ecap f010da > kernel: DMAR:RMRR base: 0x0000007dffd000 end: 0x0000007dffffff > kernel: DMAR:No ATSR found > kernel: PCI-GART: No AMD northbridge found. > kernel: system 00:01: ioport range 0x408-0x40f has been reserved > kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved > kernel: system 00:01: ioport range 0x310-0x313 has been reserved > kernel: system 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved > kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved > kernel: system 00:01: iomem range 0xfed90000-0xfed91fff has been reserved > kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] > kernel: pci 0000:00:1c.0: bridge window [io disabled] > kernel: pci 0000:00:1c.0: bridge window [mem disabled] > kernel: pci 0000:00:1c.0: bridge window [mem pref disabled] > kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] > kernel: pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] > kernel: pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff] > kernel: pci 0000:00:1c.4: bridge window [mem pref disabled] > kernel: pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref] > kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] > kernel: pci 0000:00:1c.7: bridge window [io 0x2000-0x3fff] > kernel: pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff] > kernel: pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit > pref] > kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] > kernel: pci 0000:00:1e.0: bridge window [io disabled] > kernel: pci 0000:00:1e.0: bridge window [mem disabled] > rpc.statd[2187]: Version 1.0.9 Starting > kernel: pci 0000:00:1e.0: bridge window [mem pref disabled] > kernel: GSI 16 sharing vector 0xA9 and IRQ 16 > kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ > 169 > kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ > 169 > kernel: GSI 17 sharing vector 0xB1 and IRQ 17 > kernel: ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ > 177 > kernel: NET: Registered protocol family 2 > kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > kernel: TCP established hash table entries: 262144 (order: 10, 4194304 > bytes) > kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > kernel: TCP: Hash tables configured (established 262144 bind 65536) > kernel: TCP reno registered > kernel: audit: initializing netlink socket (disabled) > kernel: type=2000 audit(1420618613.662:1): initialized > kernel: Total HugeTLB memory allocated, 0 > kernel: VFS: Disk quotas dquot_6.5.1 > kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > kernel: Initializing Cryptographic API > kernel: alg: No test for crc32c (crc32c-generic) > kernel: ksign: Installing public key data > kernel: Loading keyring > kernel: - Added public key B69F0AC84A59E856 > kernel: - User ID: CentOS (Kernel Module GPG key) > kernel: io scheduler noop registered > kernel: io scheduler anticipatory registered > kernel: io scheduler deadline registered > kernel: io scheduler cfq registered (default) > kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > kernel: ACPI: CPU0 (power states: C1[C1] C2[C2]) > kernel: ACPI: CPU1 (power states: C1[C1] C2[C2]) > kernel: ACPI: CPU2 (power states: C1[C1] C2[C2]) > kernel: ACPI: CPU3 (power states: C1[C1] C2[C2]) > kernel: ACPI: Thermal Zone [THM0] (8 C) > kernel: Real Time Clock Driver v1.12ac > kernel: Non-volatile memory driver v1.2 > kernel: Linux agpgart interface v0.101 (c) Dave Jones > kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing > enabled > kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > kernel: brd: module loaded > kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > kernel: ide-floppy driver 0.99.newide > kernel: usbcore: registered new driver hiddev > kernel: usbcore: registered new driver usbhid > kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver > kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq > 1,12 > kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 > kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 > kernel: mice: PS/2 mouse device common for all mice > kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > kernel: md: bitmap version 4.39 > kernel: TCP bic registered > kernel: Initializing IPsec netlink socket > kernel: NET: Registered protocol family 1 > kernel: NET: Registered protocol family 17 > kernel: ACPI: (supports S0 S4 S5) > kernel: Initalizing network drop monitor service > kernel: Freeing unused kernel memory: 224k freed > kernel: Write protecting the kernel read-only data: 533k > kernel: input: AT Translated Set 2 keyboard as /class/input/input0 > kernel: GSI 18 sharing vector 0xD9 and IRQ 18 > kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 21 (level, low) -> IRQ > 217 > kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller > kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number > 1 > kernel: ehci_hcd 0000:00:1a.0: debug port 2 > kernel: ehci_hcd 0000:00:1a.0: irq 217, io mem 0xfacd0000 > kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec > 2004 > kernel: usb usb1: configuration #1 chosen from 1 choice > kernel: hub 1-0:1.0: USB hub found > kernel: hub 1-0:1.0: 2 ports detected > kernel: GSI 19 sharing vector 0xE1 and IRQ 19 > kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ > 225 > kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller > kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number > 2 > kernel: ehci_hcd 0000:00:1d.0: debug port 2 > kernel: ehci_hcd 0000:00:1d.0: irq 225, io mem 0xfacc0000 > kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec > 2004 > kernel: usb usb2: configuration #1 chosen from 1 choice > kernel: hub 2-0:1.0: USB hub found > kernel: hub 2-0:1.0: 2 ports detected > kernel: USB Universal Host Controller Interface driver v3.0 > kernel: ACPI: PCI Interrupt 0000:01:00.4[B] -> GSI 16 (level, low) -> IRQ > 169 > kernel: uhci_hcd 0000:01:00.4: UHCI Host Controller > kernel: uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number > 3 > kernel: uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports > kernel: uhci_hcd 0000:01:00.4: irq 169, io base 0x00002000 > kernel: usb usb3: configuration #1 chosen from 1 choice > kernel: hub 3-0:1.0: USB hub found > kernel: hub 3-0:1.0: 2 ports detected > kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2 > kernel: md: raid1 personality registered for level 1 > kernel: SCSI subsystem initialized > kernel: GSI 20 sharing vector 0xE9 and IRQ 20 > kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ > 233 > kernel: usb 1-1: configuration #1 chosen from 1 choice > kernel: hub 1-1:1.0: USB hub found > kernel: hub 1-1:1.0: 6 ports detected > kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2 > kernel: usb 2-1: configuration #1 chosen from 1 choice > kernel: hub 2-1:1.0: USB hub found > kernel: hub 2-1:1.0: 6 ports detected > kernel: usb usb3: Controller not stopped yet! > kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl > SATA mode > kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp > pio slum part ems > kernel: scsi0 : ahci > kernel: scsi1 : ahci > kernel: scsi2 : ahci > kernel: scsi3 : ahci > kernel: scsi4 : ahci > kernel: scsi5 : ahci > kernel: ata1: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0100 irq > 50 > kernel: ata2: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0180 irq > 50 > kernel: ata3: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0200 irq > 50 > kernel: ata4: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0280 irq > 50 > kernel: ata5: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0300 irq > 50 > kernel: ata6: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0380 irq > 50 > kernel: ata1: SATA link down (SStatus 0 SControl 300) > kernel: ata2: SATA link down (SStatus 0 SControl 300) > kernel: ata3: SATA link down (SStatus 0 SControl 300) > kernel: ata4: SATA link down (SStatus 0 SControl 300) > kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > kernel: ata5.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 > kernel: ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) > kernel: ata5.00: configured for UDMA/133 > kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > kernel: ata6.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 > kernel: ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) > kernel: ata6.00: configured for UDMA/133 > kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD > kernel: Type: Direct-Access ANSI SCSI revision: 05 > kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) > kernel: sda: Write Protect is off > kernel: SCSI device sda: drive cache: write back > kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) > kernel: sda: Write Protect is off > kernel: SCSI device sda: drive cache: write back > kernel: sda: sda1 sda2 sda3 > kernel: sd 4:0:0:0: Attached scsi disk sda > kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD > kernel: Type: Direct-Access ANSI SCSI revision: 05 > kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) > kernel: sdb: Write Protect is off > kernel: SCSI device sdb: drive cache: write back > kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) > kernel: sdb: Write Protect is off > kernel: SCSI device sdb: drive cache: write back > kernel: sdb: sdb1 sdb2 sdb3 > kernel: sd 5:0:0:0: Attached scsi disk sdb > kernel: md: raid0 personality registered for level 0 > kernel: Initializing USB Mass Storage driver... > kernel: usbcore: registered new driver usb-storage > kernel: USB Mass Storage support registered. > kernel: device-mapper: uevent: version 1.0.3 > kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: > dm-devel(a)redhat.com > kernel: device-mapper: dm-raid45: initialized v0.2594l > kernel: md: Autodetecting RAID arrays. > kernel: md: autorun ... > kernel: md: considering sdb3 ... > kernel: md: adding sdb3 ... > kernel: md: sdb2 has different UUID to sdb3 > kernel: md: sdb1 has different UUID to sdb3 > kernel: md: adding sda3 ... > kernel: md: sda2 has different UUID to sdb3 > kernel: md: sda1 has different UUID to sdb3 > kernel: md: created md2 > kernel: md: bind<sda3> > kernel: md: bind<sdb3> > kernel: md: running: <sdb3><sda3> > kernel: raid1: raid set md2 active with 2 out of 2 mirrors > kernel: md: considering sdb2 ... > kernel: md: adding sdb2 ... > kernel: md: sdb1 has different UUID to sdb2 > kernel: md: adding sda2 ... > kernel: md: sda1 has different UUID to sdb2 > kernel: md: created md0 > kernel: md: bind<sda2> > kernel: md: bind<sdb2> > kernel: md: running: <sdb2><sda2> > kernel: md0: setting max_sectors to 512, segment boundary to 131071 > kernel: raid0: looking at sdb2 > kernel: raid0: comparing sdb2(2096384) with sdb2(2096384) > kernel: raid0: END > kernel: raid0: ==> UNIQUE > kernel: raid0: 1 zones > kernel: raid0: looking at sda2 > kernel: raid0: comparing sda2(2096384) with sdb2(2096384) > kernel: raid0: EQUAL > kernel: raid0: FINAL 1 zones > kernel: raid0: done. > kernel: raid0 : md_size is 4192768 blocks. > kernel: raid0 : conf->hash_spacing is 4192768 blocks. > kernel: raid0 : nb_zone is 1. > kernel: raid0 : Allocating 8 bytes for hash. > kernel: md: considering sdb1 ... > kernel: md: adding sdb1 ... > kernel: md: adding sda1 ... > kernel: md: created md1 > kernel: md: bind<sda1> > kernel: md: bind<sdb1> > kernel: md: running: <sdb1><sda1> > kernel: raid1: raid set md1 active with 2 out of 2 mirrors > kernel: md: ... autorun DONE. > kernel: md: Autodetecting RAID arrays. > kernel: md: autorun ... > kernel: md: ... autorun DONE. > kernel: kjournald starting. Commit interval 5 seconds > kernel: EXT3-fs: mounted filesystem with ordered data mode. > kernel: SELinux: Disabled at runtime. > kernel: type=1404 audit(1420618647.375:2): selinux=0 auid=4294967295 > ses=4294967295 > kernel: input: PC Speaker as /class/input/input1 > kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > kernel: ACPI: PCI Interrupt 0000:01:00.2[B] -> GSI 16 (level, low) -> IRQ > 169 > kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k > kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation. > kernel: e1000e 0000:02:00.0: Disabling ASPM L0s L1 > kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ > 169 > kernel: e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to > dynamic conservative mode > kernel: Floppy drive(s): fd0 is 1.44M > kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0 > kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0 > kernel: e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) > 38:ea:a7:aa:8a:32 > kernel: e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection > kernel: e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF > kernel: floppy0: no floppy controllers found > kernel: work still pending > kernel: Floppy drive(s): fd0 is 1.44M > kernel: floppy0: no floppy controllers found > kernel: work still pending > kernel: lp: driver loaded but no devices found > kernel: ACPI: Power Button (FF) [PWRF] > kernel: ACPI: Mapper loaded > kernel: dell-wmi: No known WMI GUID found > kernel: md: Autodetecting RAID arrays. > kernel: md: autorun ... > kernel: md: ... autorun DONE. > kernel: device-mapper: multipath: version 1.0.6 loaded > kernel: EXT3 FS on md2, internal journal > kernel: kjournald starting. Commit interval 5 seconds > kernel: EXT3 FS on md1, internal journal > kernel: EXT3-fs: mounted filesystem with ordered data mode. > kernel: Adding 4192760k swap on /dev/md0. Priority:-1 extents:1 > across:4192760k > kernel: Loading iSCSI transport class v2.0-871. > kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com> > kernel: All bugs added by David S. Miller <davem(a)redhat.com> > kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 > bits. > kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. > kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) > kernel: iscsi: registered transport (cxgb3i) > kernel: IPv6: Loaded, but administratively disabled, reboot required to > enable > kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, > 2012) > kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012) > kernel: iscsi: registered transport (bnx2i) > kernel: iscsi: registered transport (tcp) > kernel: iscsi: registered transport (iser) > kernel: iscsi: registered transport (be2iscsi) > kernel: 8021q: adding VLAN 0 to HW filter on device eth0 > kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx > ntpd[2452]: ntpd 4.2.2p1(a)1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1) > ntpd[2453]: precision = 1.000 usec > ntpd[2453]: Listening on interface wildcard, 0.0.0.0#123 Disabled > ntpd[2453]: Listening on interface lo, 127.0.0.1#123 Enabled > ntpd[2453]: Listening on interface eth0, 178.18.69.1#123 Enabled > ntpd[2453]: kernel time sync status 0040 > ntpd[2453]: getaddrinfo: "::1" invalid host address, ignored > xinetd[2437]: xinetd Version 2.3.14 started with libwrap loadavg > labeled-networking options compiled in. > xinetd[2437]: Started working: 1 available service > FaxQueuer[2970]: HylaFAX (tm) Version 4.3.10 > FaxQueuer[2970]: Copyright (c) 1990-1996 Sam Leffler > FaxQueuer[2970]: Copyright (c) 1991-1996 Silicon Graphics, Inc. > HylaFAX[2973]: HylaFAX INET Protocol Server: restarted. > saslauthd[3001]: detach_tty : master pid is: 3001 > saslauthd[3001]: ipc_init : listening on socket: > /var/run/saslauthd/mux > ntpd[2453]: frequency initialized 8.527 PPM from /var/lib/ntp/drift > ntpd[2453]: synchronized to 200.27.106.115, stratum 1 > ntpd[2453]: kernel time sync enabled 0001 > _______________________________________________ > CentOS-es mailing list > CentOS-es(a)centos.org > http://lists.centos.org/mailman/listinfo/centos-es > -- Carlos Restrepo. Móvil: (57) 317 8345628

10 years, 3 months

Re: [CentOS-es] ayudar servidor se me apaga

by Aldo Rivadeneira

Lo único que puedo detectar es que activaron IPv6 y eso requiere de un reinicio de sistema para que lo tome activo. El segundo detalle es el raid no se si te este causando problemas la controladora seria cosa de validar si actualizaron el kernel y exista un problema con ello. Como comentan seria cosa de probar : Validar por partes el kernel y si es algo físico. Probar si es el caso con el kernel anterior. Actualizar kernel nuevamente. Actualizar firmware de la controladora RAID. Saludos, On Wednesday, January 7, 2015, Guillermo Henríquez <guillermomagno(a)gmail.com> wrote: > Amigos: > > Necesito ayuda, un servidor se me apaga, con el mensaje shutting down for > system halt y luego al arrancalo muestra el sig. log: > > > kernel: Linux version 2.6.18-348.1.1.el5 (mockbuild(a)builder10.centos.org > <javascript:;>) > (gcc version 4.1.2 20080704 (Red Hat 4.1.2-54)) #1 SMP Tue Jan 22 16:19:19 > EST 2013 > kernel: Command line: ro root=/dev/md2 > kernel: BIOS-provided physical RAM map: > kernel: BIOS-e820: 0000000000010000 - 0000000000093800 (usable) > kernel: BIOS-e820: 0000000000093800 - 0000000000093c00 (reserved) > kernel: BIOS-e820: 0000000000098000 - 00000000000a0000 (reserved) > kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > kernel: BIOS-e820: 0000000000100000 - 000000007d7d4000 (usable) > kernel: BIOS-e820: 000000007d7d4000 - 000000007d7de000 (ACPI data) > kernel: BIOS-e820: 000000007d7de000 - 000000007d7df000 (usable) > kernel: BIOS-e820: 000000007d7df000 - 0000000080000000 (reserved) > kernel: BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) > kernel: BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) > kernel: BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) > kernel: DMI 2.7 present. > kernel: No NUMA configuration found > kernel: Faking a node at 0000000000000000-000000007d7df000 > kernel: Bootmem setup node 0 0000000000000000-000000007d7df000 > kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range > kernel: disabling kdump > kernel: ACPI: PM-Timer IO Port: 0x908 > kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > kernel: Processor #0 7:10 APIC version 21 > kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > kernel: Processor #2 7:10 APIC version 21 > kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) > kernel: Processor #4 7:10 APIC version 21 > kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) > kernel: Processor #6 7:10 APIC version 21 > kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) > last message repeated 59 times > kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) > kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 > kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) > kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > kernel: Setting APIC routing to physical flat > kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000 > kernel: Using ACPI (MADT) for SMP configuration information > kernel: Nosave address range: 0000000000093000 - 0000000000094000 > kernel: Nosave address range: 0000000000093000 - 0000000000098000 > kernel: Nosave address range: 0000000000098000 - 00000000000a0000 > kernel: Nosave address range: 00000000000a0000 - 00000000000f0000 > kernel: Nosave address range: 00000000000f0000 - 0000000000100000 > kernel: Nosave address range: 000000007d7d4000 - 000000007d7de000 > kernel: Allocating PCI resources starting at 88000000 (gap: > 80000000:74000000) > kernel: SMP: Allowing 64 CPUs, 60 hotplug CPUs > kernel: Built 1 zonelists. Total pages: 505346 > kernel: Kernel command line: ro root=/dev/md2 > kernel: Initializing CPU#0 > kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) > kernel: Console: colour VGA+ 80x25 > kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > kernel: Checking aperture... > kernel: Memory: 2012576k/2056060k available (2627k kernel code, 42944k > reserved, 1677k data, 224k init) > kernel: Calibrating delay loop (skipped), value calculated using timer > frequency.. 6186.24 BogoMIPS (lpj=3093121) > kernel: Security Framework v1.0.0 initialized > kernel: SELinux: Initializing. > kernel: selinux_register_security: Registering secondary module capability > kernel: Capability LSM initialized as secondary > kernel: Mount-cache hash table entries: 256 > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K > kernel: CPU: L2 cache: 256K > kernel: CPU: L3 cache: 8192K > kernel: using mwait in idle threads. > kernel: CPU: Physical Processor ID: 0 > kernel: CPU: Processor Core ID: 0 > kernel: MCE: Machine Check Exception Reporting is disabled. > kernel: SMP alternatives: switching to UP code > kernel: ACPI: Core revision 20060707 > kernel: Using local APIC timer interrupts. > kernel: Detected 6.236 MHz APIC timer. > kernel: SMP alternatives: switching to SMP code > kernel: Booting processor 1/4 APIC 0x2 > kernel: Initializing CPU#1 > kernel: Calibrating delay using timer specific routine.. 6185.87 BogoMIPS > (lpj=3092938) > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K > kernel: CPU: L2 cache: 256K > kernel: CPU: L3 cache: 8192K > kernel: CPU: Physical Processor ID: 0 > kernel: CPU: Processor Core ID: 1 > kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 > kernel: SMP alternatives: switching to SMP code > kernel: Booting processor 2/4 APIC 0x4 > kernel: Initializing CPU#2 > kernel: Calibrating delay using timer specific routine.. 6185.88 BogoMIPS > (lpj=3092941) > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K > kernel: CPU: L2 cache: 256K > kernel: CPU: L3 cache: 8192K > kernel: CPU: Physical Processor ID: 0 > kernel: CPU: Processor Core ID: 2 > kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 > kernel: SMP alternatives: switching to SMP code > kernel: Booting processor 3/4 APIC 0x6 > kernel: Initializing CPU#3 > kernel: Calibrating delay using timer specific routine.. 6185.86 BogoMIPS > (lpj=3092932) > kernel: CPU: L1 I cache: 32K, L1 D cache: 32K > kernel: CPU: L2 cache: 256K > kernel: CPU: L3 cache: 8192K > kernel: CPU: Physical Processor ID: 0 > kernel: CPU: Processor Core ID: 3 > kernel: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz stepping 09 > kernel: Brought up 4 CPUs > kernel: NMI watchdog testing PASSED. > kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. > kernel: time.c: Detected 3093.121 MHz processor. > kernel: migration_cost=23 > kernel: checking if image is initramfs... it is > kernel: Freeing initrd memory: 2693k freed > kernel: NET: Registered protocol family 16 > kernel: ACPI: bus type pci registered > kernel: Warning: pci_mmcfg_init marking 256MB space uncacheable. > kernel: MCFG table requires 64MB uncacheable only. Try booting with > acpi_mcfg_max_pci_bus_num=on > kernel: PCI: Using MMCONFIG at f4000000 > kernel: ACPI: Interpreter enabled > kernel: ACPI: Using IOAPIC for interrupt routing > kernel: ACPI: No dock devices found. > kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) > kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] > kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] > kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] > kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] (subtractive decode) > kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) > kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) > kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled. > kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) > kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) > kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4 > kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled. > kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled. > kernel: Linux Plug and Play Support v0.97 (c) Adam Belay > kernel: pnp: PnP ACPI init > kernel: pnp: PnP ACPI: found 10 devices > kernel: usbcore: registered new driver usbfs > kernel: usbcore: registered new driver hub > kernel: PCI: Using ACPI for IRQ routing > kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, > post a report > kernel: NetLabel: Initializing > kernel: NetLabel: domain hash size = 128 > kernel: NetLabel: protocols = UNLABELED CIPSOv4 > kernel: NetLabel: unlabeled traffic allowed by default > kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, > 0, 0, 0, 0, 0, 0 > kernel: hpet0: 8 64-bit timers, 14318180 Hz > kernel: DMAR:Host address width 39 > kernel: DMAR:DRHD base: 0x000000fed90000 flags: 0x1 > kernel: IOMMU fed90000: ver 1:0 cap c9008020660262 ecap f010da > kernel: DMAR:RMRR base: 0x0000007dffd000 end: 0x0000007dffffff > kernel: DMAR:No ATSR found > kernel: PCI-GART: No AMD northbridge found. > kernel: system 00:01: ioport range 0x408-0x40f has been reserved > kernel: system 00:01: ioport range 0x4d0-0x4d1 has been reserved > kernel: system 00:01: ioport range 0x310-0x313 has been reserved > kernel: system 00:01: iomem range 0xf4000000-0xf7ffffff has been reserved > kernel: system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved > kernel: system 00:01: iomem range 0xfed90000-0xfed91fff has been reserved > kernel: pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] > kernel: pci 0000:00:1c.0: bridge window [io disabled] > kernel: pci 0000:00:1c.0: bridge window [mem disabled] > kernel: pci 0000:00:1c.0: bridge window [mem pref disabled] > kernel: pci 0000:00:1c.4: PCI bridge to [bus 02-02] > kernel: pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] > kernel: pci 0000:00:1c.4: bridge window [mem 0xfbf00000-0xfbffffff] > kernel: pci 0000:00:1c.4: bridge window [mem pref disabled] > kernel: pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref] > kernel: pci 0000:00:1c.7: PCI bridge to [bus 01-01] > kernel: pci 0000:00:1c.7: bridge window [io 0x2000-0x3fff] > kernel: pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff] > kernel: pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit > pref] > kernel: pci 0000:00:1e.0: PCI bridge to [bus 13-13] > kernel: pci 0000:00:1e.0: bridge window [io disabled] > kernel: pci 0000:00:1e.0: bridge window [mem disabled] > rpc.statd[2187]: Version 1.0.9 Starting > kernel: pci 0000:00:1e.0: bridge window [mem pref disabled] > kernel: GSI 16 sharing vector 0xA9 and IRQ 16 > kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ > 169 > kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ > 169 > kernel: GSI 17 sharing vector 0xB1 and IRQ 17 > kernel: ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ > 177 > kernel: NET: Registered protocol family 2 > kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > kernel: TCP established hash table entries: 262144 (order: 10, 4194304 > bytes) > kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > kernel: TCP: Hash tables configured (established 262144 bind 65536) > kernel: TCP reno registered > kernel: audit: initializing netlink socket (disabled) > kernel: type=2000 audit(1420618613.662:1): initialized > kernel: Total HugeTLB memory allocated, 0 > kernel: VFS: Disk quotas dquot_6.5.1 > kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > kernel: Initializing Cryptographic API > kernel: alg: No test for crc32c (crc32c-generic) > kernel: ksign: Installing public key data > kernel: Loading keyring > kernel: - Added public key B69F0AC84A59E856 > kernel: - User ID: CentOS (Kernel Module GPG key) > kernel: io scheduler noop registered > kernel: io scheduler anticipatory registered > kernel: io scheduler deadline registered > kernel: io scheduler cfq registered (default) > kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > kernel: ACPI: CPU0 (power states: C1[C1] C2[C2]) > kernel: ACPI: CPU1 (power states: C1[C1] C2[C2]) > kernel: ACPI: CPU2 (power states: C1[C1] C2[C2]) > kernel: ACPI: CPU3 (power states: C1[C1] C2[C2]) > kernel: ACPI: Thermal Zone [THM0] (8 C) > kernel: Real Time Clock Driver v1.12ac > kernel: Non-volatile memory driver v1.2 > kernel: Linux agpgart interface v0.101 (c) Dave Jones > kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing > enabled > kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > kernel: brd: module loaded > kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > kernel: ide-floppy driver 0.99.newide > kernel: usbcore: registered new driver hiddev > kernel: usbcore: registered new driver usbhid > kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver > kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq > 1,12 > kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 > kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 > kernel: mice: PS/2 mouse device common for all mice > kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > kernel: md: bitmap version 4.39 > kernel: TCP bic registered > kernel: Initializing IPsec netlink socket > kernel: NET: Registered protocol family 1 > kernel: NET: Registered protocol family 17 > kernel: ACPI: (supports S0 S4 S5) > kernel: Initalizing network drop monitor service > kernel: Freeing unused kernel memory: 224k freed > kernel: Write protecting the kernel read-only data: 533k > kernel: input: AT Translated Set 2 keyboard as /class/input/input0 > kernel: GSI 18 sharing vector 0xD9 and IRQ 18 > kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 21 (level, low) -> IRQ > 217 > kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller > kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number > 1 > kernel: ehci_hcd 0000:00:1a.0: debug port 2 > kernel: ehci_hcd 0000:00:1a.0: irq 217, io mem 0xfacd0000 > kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec > 2004 > kernel: usb usb1: configuration #1 chosen from 1 choice > kernel: hub 1-0:1.0: USB hub found > kernel: hub 1-0:1.0: 2 ports detected > kernel: GSI 19 sharing vector 0xE1 and IRQ 19 > kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ > 225 > kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller > kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number > 2 > kernel: ehci_hcd 0000:00:1d.0: debug port 2 > kernel: ehci_hcd 0000:00:1d.0: irq 225, io mem 0xfacc0000 > kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec > 2004 > kernel: usb usb2: configuration #1 chosen from 1 choice > kernel: hub 2-0:1.0: USB hub found > kernel: hub 2-0:1.0: 2 ports detected > kernel: USB Universal Host Controller Interface driver v3.0 > kernel: ACPI: PCI Interrupt 0000:01:00.4[B] -> GSI 16 (level, low) -> IRQ > 169 > kernel: uhci_hcd 0000:01:00.4: UHCI Host Controller > kernel: uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number > 3 > kernel: uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports > kernel: uhci_hcd 0000:01:00.4: irq 169, io base 0x00002000 > kernel: usb usb3: configuration #1 chosen from 1 choice > kernel: hub 3-0:1.0: USB hub found > kernel: hub 3-0:1.0: 2 ports detected > kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2 > kernel: md: raid1 personality registered for level 1 > kernel: SCSI subsystem initialized > kernel: GSI 20 sharing vector 0xE9 and IRQ 20 > kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ > 233 > kernel: usb 1-1: configuration #1 chosen from 1 choice > kernel: hub 1-1:1.0: USB hub found > kernel: hub 1-1:1.0: 6 ports detected > kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2 > kernel: usb 2-1: configuration #1 chosen from 1 choice > kernel: hub 2-1:1.0: USB hub found > kernel: hub 2-1:1.0: 6 ports detected > kernel: usb usb3: Controller not stopped yet! > kernel: ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl > SATA mode > kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp > pio slum part ems > kernel: scsi0 : ahci > kernel: scsi1 : ahci > kernel: scsi2 : ahci > kernel: scsi3 : ahci > kernel: scsi4 : ahci > kernel: scsi5 : ahci > kernel: ata1: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0100 irq > 50 > kernel: ata2: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0180 irq > 50 > kernel: ata3: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0200 irq > 50 > kernel: ata4: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0280 irq > 50 > kernel: ata5: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0300 irq > 50 > kernel: ata6: SATA max UDMA/133 abar m2048@0xfacb0000 port 0xfacb0380 irq > 50 > kernel: ata1: SATA link down (SStatus 0 SControl 300) > kernel: ata2: SATA link down (SStatus 0 SControl 300) > kernel: ata3: SATA link down (SStatus 0 SControl 300) > kernel: ata4: SATA link down (SStatus 0 SControl 300) > kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > kernel: ata5.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 > kernel: ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) > kernel: ata5.00: configured for UDMA/133 > kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > kernel: ata6.00: ATA-8: MB1000GCEHH, HPGD, max UDMA/133 > kernel: ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) > kernel: ata6.00: configured for UDMA/133 > kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD > kernel: Type: Direct-Access ANSI SCSI revision: 05 > kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) > kernel: sda: Write Protect is off > kernel: SCSI device sda: drive cache: write back > kernel: SCSI device sda: 1953525168 512-byte hdwr sectors (1000205 MB) > kernel: sda: Write Protect is off > kernel: SCSI device sda: drive cache: write back > kernel: sda: sda1 sda2 sda3 > kernel: sd 4:0:0:0: Attached scsi disk sda > kernel: Vendor: ATA Model: MB1000GCEHH Rev: HPGD > kernel: Type: Direct-Access ANSI SCSI revision: 05 > kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) > kernel: sdb: Write Protect is off > kernel: SCSI device sdb: drive cache: write back > kernel: SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB) > kernel: sdb: Write Protect is off > kernel: SCSI device sdb: drive cache: write back > kernel: sdb: sdb1 sdb2 sdb3 > kernel: sd 5:0:0:0: Attached scsi disk sdb > kernel: md: raid0 personality registered for level 0 > kernel: Initializing USB Mass Storage driver... > kernel: usbcore: registered new driver usb-storage > kernel: USB Mass Storage support registered. > kernel: device-mapper: uevent: version 1.0.3 > kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: > dm-devel(a)redhat.com <javascript:;> > kernel: device-mapper: dm-raid45: initialized v0.2594l > kernel: md: Autodetecting RAID arrays. > kernel: md: autorun ... > kernel: md: considering sdb3 ... > kernel: md: adding sdb3 ... > kernel: md: sdb2 has different UUID to sdb3 > kernel: md: sdb1 has different UUID to sdb3 > kernel: md: adding sda3 ... > kernel: md: sda2 has different UUID to sdb3 > kernel: md: sda1 has different UUID to sdb3 > kernel: md: created md2 > kernel: md: bind<sda3> > kernel: md: bind<sdb3> > kernel: md: running: <sdb3><sda3> > kernel: raid1: raid set md2 active with 2 out of 2 mirrors > kernel: md: considering sdb2 ... > kernel: md: adding sdb2 ... > kernel: md: sdb1 has different UUID to sdb2 > kernel: md: adding sda2 ... > kernel: md: sda1 has different UUID to sdb2 > kernel: md: created md0 > kernel: md: bind<sda2> > kernel: md: bind<sdb2> > kernel: md: running: <sdb2><sda2> > kernel: md0: setting max_sectors to 512, segment boundary to 131071 > kernel: raid0: looking at sdb2 > kernel: raid0: comparing sdb2(2096384) with sdb2(2096384) > kernel: raid0: END > kernel: raid0: ==> UNIQUE > kernel: raid0: 1 zones > kernel: raid0: looking at sda2 > kernel: raid0: comparing sda2(2096384) with sdb2(2096384) > kernel: raid0: EQUAL > kernel: raid0: FINAL 1 zones > kernel: raid0: done. > kernel: raid0 : md_size is 4192768 blocks. > kernel: raid0 : conf->hash_spacing is 4192768 blocks. > kernel: raid0 : nb_zone is 1. > kernel: raid0 : Allocating 8 bytes for hash. > kernel: md: considering sdb1 ... > kernel: md: adding sdb1 ... > kernel: md: adding sda1 ... > kernel: md: created md1 > kernel: md: bind<sda1> > kernel: md: bind<sdb1> > kernel: md: running: <sdb1><sda1> > kernel: raid1: raid set md1 active with 2 out of 2 mirrors > kernel: md: ... autorun DONE. > kernel: md: Autodetecting RAID arrays. > kernel: md: autorun ... > kernel: md: ... autorun DONE. > kernel: kjournald starting. Commit interval 5 seconds > kernel: EXT3-fs: mounted filesystem with ordered data mode. > kernel: SELinux: Disabled at runtime. > kernel: type=1404 audit(1420618647.375:2): selinux=0 auid=4294967295 > ses=4294967295 > kernel: input: PC Speaker as /class/input/input1 > kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > kernel: ACPI: PCI Interrupt 0000:01:00.2[B] -> GSI 16 (level, low) -> IRQ > 169 > kernel: e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k > kernel: e1000e: Copyright(c) 1999 - 2012 Intel Corporation. > kernel: e1000e 0000:02:00.0: Disabling ASPM L0s L1 > kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ > 169 > kernel: e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to > dynamic conservative mode > kernel: Floppy drive(s): fd0 is 1.44M > kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0 > kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0 > kernel: e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) > 38:ea:a7:aa:8a:32 > kernel: e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection > kernel: e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF > kernel: floppy0: no floppy controllers found > kernel: work still pending > kernel: Floppy drive(s): fd0 is 1.44M > kernel: floppy0: no floppy controllers found > kernel: work still pending > kernel: lp: driver loaded but no devices found > kernel: ACPI: Power Button (FF) [PWRF] > kernel: ACPI: Mapper loaded > kernel: dell-wmi: No known WMI GUID found > kernel: md: Autodetecting RAID arrays. > kernel: md: autorun ... > kernel: md: ... autorun DONE. > kernel: device-mapper: multipath: version 1.0.6 loaded > kernel: EXT3 FS on md2, internal journal > kernel: kjournald starting. Commit interval 5 seconds > kernel: EXT3 FS on md1, internal journal > kernel: EXT3-fs: mounted filesystem with ordered data mode. > kernel: Adding 4192760k swap on /dev/md0. Priority:-1 extents:1 > across:4192760k > kernel: Loading iSCSI transport class v2.0-871. > kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb(a)candelatech.com > <javascript:;>> > kernel: All bugs added by David S. Miller <davem(a)redhat.com <javascript:;> > > > kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 > bits. > kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. > kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) > kernel: iscsi: registered transport (cxgb3i) > kernel: IPv6: Loaded, but administratively disabled, reboot required to > enable > kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, > 2012) > kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Jun 18, 2012) > kernel: iscsi: registered transport (bnx2i) > kernel: iscsi: registered transport (tcp) > kernel: iscsi: registered transport (iser) > kernel: iscsi: registered transport (be2iscsi) > kernel: 8021q: adding VLAN 0 to HW filter on device eth0 > kernel: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx > ntpd[2452]: ntpd 4.2.2p1(a)1.1570-o Fri Nov 18 13:21:21 UTC 2011 (1) > ntpd[2453]: precision = 1.000 usec > ntpd[2453]: Listening on interface wildcard, 0.0.0.0#123 Disabled > ntpd[2453]: Listening on interface lo, 127.0.0.1#123 Enabled > ntpd[2453]: Listening on interface eth0, 178.18.69.1#123 Enabled > ntpd[2453]: kernel time sync status 0040 > ntpd[2453]: getaddrinfo: "::1" invalid host address, ignored > xinetd[2437]: xinetd Version 2.3.14 started with libwrap loadavg > labeled-networking options compiled in. > xinetd[2437]: Started working: 1 available service > FaxQueuer[2970]: HylaFAX (tm) Version 4.3.10 > FaxQueuer[2970]: Copyright (c) 1990-1996 Sam Leffler > FaxQueuer[2970]: Copyright (c) 1991-1996 Silicon Graphics, Inc. > HylaFAX[2973]: HylaFAX INET Protocol Server: restarted. > saslauthd[3001]: detach_tty : master pid is: 3001 > saslauthd[3001]: ipc_init : listening on socket: > /var/run/saslauthd/mux > ntpd[2453]: frequency initialized 8.527 PPM from /var/lib/ntp/drift > ntpd[2453]: synchronized to 200.27.106.115, stratum 1 > ntpd[2453]: kernel time sync enabled 0001 > _______________________________________________ > CentOS-es mailing list > CentOS-es(a)centos.org <javascript:;> > http://lists.centos.org/mailman/listinfo/centos-es > -- Aldo Rivadeneira Reyna

10 years, 2 months

[CentOS] CentOS 6.0: panic installing i386 on old Acer Desktop

by William L. Maltby

Well, after much trial and tribulation I got to the point I could nfs mount the CentOS 6.0 i386 iso image and try an install. So I stuck in the net install CD (latest from CentOS), mounted the nfs iso image and gave it several shots. It goes swimmingly until I click "write disks". Then there's a kernel panic. This with both the graphic and text mode installs. As mentioned, I've not yet researched/figured how I might capture this from my KVM. I've got some 5.x and 6.0 (with cr updates) and windows units available on my homegroannetwork LAN if there's a way to do it over a network. I've got some old serial cables (and various null modem ones and/or adapters) and Wyse-60 terminals but I don't even know yet if I can boot this with output to a serial port. I'll be checking that. If someone has figured out how to capture the output in my situation during initial system install, I'm all "ears". The system still boots the old CentOS 4.8 (first boots in around a ... year(?)) and I did dmidecode and a couple other short commnds that I hope is enough for someone to offer further direction or suggestions. Apologies for the size but it's been so long since I did any low-level stuff I was afraid I'd snip something important. I tried, based on *old* memories, adding kernel arguments of noapic and nolapic (IIRC). Still no joy. TIA for any thoughts, Bill Dmidecode output: # dmidecode 2.9 SMBIOS 2.3 present. 39 structures occupying 1094 bytes. Table at 0x000F0800. Handle 0x0000, DMI type 0, 20 bytes BIOS Information Vendor: Phoenix/Award Technologies, LTD Version: 6.00 PG Release Date: 11/04/2004 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 256 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supported Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: VIA Technologies, Inc. Product Name: KT400-8235 Version: Serial Number: 12 UUID: 00000000-0000-0000-0000-000000000001 Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: AOpen Product Name: AK77-8XN Version: 918A710301 Serial Number: I0500031JE13 Handle 0x0003, DMI type 3, 17 bytes Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: Socket A Type: Central Processor Family: Duron Manufacturer: AMD ID: 81 06 00 00 FF F9 83 03 Signature: Family 6, Model 8, Stepping 1 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) Version: AMD Athlon(tm) XP Voltage: 1.6 V External Clock: 133 MHz Max Speed: 1500 MHz Current Speed: 1800 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0009 L2 Cache Handle: 0x000A L3 Cache Handle: Not Provided Serial Number: Asset Tag: Part Number: Handle 0x0005, DMI type 5, 22 bytes Memory Controller Information Error Detecting Method: 8-bit Parity Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: Four-way Interleave Maximum Memory Module Size: 32 MB Maximum Total Memory Size: 96 MB Supported Speeds: 70 ns 60 ns Supported Memory Types: Standard EDO Memory Module Voltage: 5.0 V Associated Memory Slots: 3 0x0006 0x0007 0x0308 Enabled Error Correcting Capabilities: None Handle 0x0006, DMI type 6, 12 bytes Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: 60 ns Type: DIMM SDRAM Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0007, DMI type 6, 12 bytes Memory Module Information Socket Designation: A2 Bank Connections: None Current Speed: 60 ns Type: Unknown Installed Size: Not Installed Enabled Size: Not Installed Error Status: OK Handle 0x0008, DMI type 6, 12 bytes Memory Module Information Socket Designation: A4 Bank Connections: 4 5 Current Speed: 60 ns Type: DIMM SDRAM Installed Size: 1024 MB (Double-bank Connection) Enabled Size: 1024 MB (Double-bank Connection) Error Status: OK Handle 0x0009, DMI type 7, 19 bytes Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000A, DMI type 7, 19 bytes Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: External Installed Size: 256 KB Maximum Size: 256 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 Compatible Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPP Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USB Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: AUDIO External Connector Type: None Port Type: Audio Port Handle 0x0015, DMI type 9, 13 bytes System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: Available Length: Long ID: 1 Characteristics: 5.0 V is provided Modem ring resume is supported PME signal is supported Handle 0x0016, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 2 Characteristics: 5.0 V is provided Modem ring resume is supported PME signal is supported Handle 0x0017, DMI type 9, 13 bytes System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: Available Length: Long ID: 3 Characteristics: 5.0 V is provided Modem ring resume is supported PME signal is supported Handle 0x0018, DMI type 9, 13 bytes System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: Available Length: Long ID: 4 Characteristics: 5.0 V is provided Modem ring resume is supported PME signal is supported Handle 0x0019, DMI type 9, 13 bytes System Slot Information Designation: PCI4 Type: 32-bit PCI Current Usage: Available Length: Long ID: 5 Characteristics: 5.0 V is provided Modem ring resume is supported PME signal is supported Handle 0x001A, DMI type 9, 13 bytes System Slot Information Designation: PCI5 Type: 32-bit PCI Current Usage: Available Length: Long ID: 6 Characteristics: 5.0 V is provided Modem ring resume is supported PME signal is supported Handle 0x001B, DMI type 9, 13 bytes System Slot Information Designation: AGP Type: 32-bit AGP Current Usage: In Use Length: Long ID: 0 Characteristics: 3.3 V is provided Handle 0x001C, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 2 en|US|iso8859-1 de|DE|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x001D, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 768 MB Error Information Handle: Not Provided Number Of Devices: 3 Handle 0x001E, DMI type 17, 27 bytes Memory Device Array Handle: 0x001D Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 1024 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x001F, DMI type 17, 27 bytes Memory Device Array Handle: 0x001D Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x0020, DMI type 17, 27 bytes Memory Device Array Handle: 0x001D Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 1024 MB Form Factor: DIMM Set: None Locator: A4 Bank Locator: Bank4/5 Type: Unknown Type Detail: None Speed: Unknown Manufacturer: None Serial Number: None Asset Tag: None Part Number: None Handle 0x0021, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Array Handle: 0x001D Partition Width: 0 Handle 0x0022, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x001E Memory Array Mapped Address Handle: 0x0021 Partition Row Position: 1 Handle 0x0023, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x001F Memory Array Mapped Address Handle: 0x0021 Partition Row Position: 1 Handle 0x0024, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x0020 Memory Array Mapped Address Handle: 0x0021 Partition Row Position: 1 Handle 0x0025, DMI type 32, 11 bytes System Boot Information Status: No errors detected Handle 0x0026, DMI type 127, 4 bytes End Of Table Uname out from the current system on that unit - running just fine. Linux centos01.homegroannetwork 2.6.9-89.0.16.EL #1 Tue Nov 3 17:15:02 EST 2009 i686 athlon i386 GNU/Linux >From lsb_release: LSB Version: :core-3.0-ia32:core-3.0-noarch:graphics-3.0-ia32:graphics-3.0-noarch Distributor ID: CentOS Description: CentOS release 4.8 (Final) Release: 4.8 Codename: Final

13 years, 6 months

Re: [CentOS-pt-br] Instalar virtualbox no centos 7

by Gabriel Franca

então tenho sim tanto o devel quanto o headers. acredito que seja alguma coisa com o centos 7. desabilitei o firewall e o selinux tbm e nada =\ no dmesg eu nao vi nada de erro tbm. att, Gabriel Franca > Em 21/01/2015, à(s) 15:17, Jean Pereira <admin(a)olostech.com> escreveu: > > On 01/21/2015 01:52 PM, Gabriel Franca wrote: >> Quando olhei não achei muita coisa nele. Segue um bom trecho do dmesg. >> > tu tens o devel do kernel instalado? > tens também as dependências de compilação instaladas? > eu tenho ele instalado, e ainda no kernel 3.18.3 > verifica também a versão dele, se está atualizado >> [ 0.376277] efifb: scrolling: redraw >> [ 0.376278] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 >> [ 0.378586] Console: switching to colour frame buffer device 200x56 >> [ 0.380693] fb0: EFI VGA frame buffer device >> [ 0.380697] intel_idle: MWAIT substates: 0x42120 >> [ 0.380698] intel_idle: v0.4 model 0x3C >> [ 0.380698] intel_idle: lapic_timer_reliable_states 0xffffffff >> [ 0.380758] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 >> [ 0.380761] ACPI: Power Button [PWRB] >> [ 0.380778] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >> [ 0.380779] ACPI: Power Button [PWRF] >> [ 0.380813] ACPI: Fan [FAN0] (off) >> [ 0.380827] ACPI: Fan [FAN1] (off) >> [ 0.380840] ACPI: Fan [FAN2] (off) >> [ 0.380852] ACPI: Fan [FAN3] (off) >> [ 0.380863] ACPI: Fan [FAN4] (off) >> [ 0.380896] ACPI: Requesting acpi_cpufreq >> [ 0.381261] thermal LNXTHERM:00: registered as thermal_zone0 >> [ 0.381262] ACPI: Thermal Zone [TZ00] (28 C) >> [ 0.381390] thermal LNXTHERM:01: registered as thermal_zone1 >> [ 0.381391] ACPI: Thermal Zone [TZ01] (30 C) >> [ 0.381409] GHES: HEST is not enabled! >> [ 0.381449] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >> [ 0.401972] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> [ 0.402257] Non-volatile memory driver v1.3 >> [ 0.402259] Linux agpgart interface v0.103 >> [ 0.402302] crash memory driver: version 1.1 >> [ 0.402315] rdac: device handler registered >> [ 0.402338] hp_sw: device handler registered >> [ 0.402339] emc: device handler registered >> [ 0.402340] alua: device handler registered >> [ 0.402355] libphy: Fixed MDIO Bus: probed >> [ 0.402380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >> [ 0.402382] ehci-pci: EHCI PCI platform driver >> [ 0.402440] ehci-pci 0000:00:1a.0: EHCI Host Controller >> [ 0.402465] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 >> [ 0.402474] ehci-pci 0000:00:1a.0: debug port 2 >> [ 0.406366] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported >> [ 0.406379] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000 >> [ 0.412032] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 >> [ 0.412054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 >> [ 0.412056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.412057] usb usb1: Product: EHCI Host Controller >> [ 0.412058] usb usb1: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd >> [ 0.412058] usb usb1: SerialNumber: 0000:00:1a.0 >> [ 0.412117] hub 1-0:1.0: USB hub found >> [ 0.412120] hub 1-0:1.0: 2 ports detected >> [ 0.412226] ehci-pci 0000:00:1d.0: EHCI Host Controller >> [ 0.412250] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 >> [ 0.412260] ehci-pci 0000:00:1d.0: debug port 2 >> [ 0.416160] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported >> [ 0.416171] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 >> [ 0.422032] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 >> [ 0.422049] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 >> [ 0.422050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.422051] usb usb2: Product: EHCI Host Controller >> [ 0.422052] usb usb2: Manufacturer: Linux 3.10.0-123.el7.x86_64 ehci_hcd >> [ 0.422053] usb usb2: SerialNumber: 0000:00:1d.0 >> [ 0.422111] hub 2-0:1.0: USB hub found >> [ 0.422115] hub 2-0:1.0: 2 ports detected >> [ 0.422183] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >> [ 0.422184] ohci-pci: OHCI PCI platform driver >> [ 0.422189] uhci_hcd: USB Universal Host Controller Interface driver >> [ 0.422258] xhci_hcd 0000:00:14.0: xHCI Host Controller >> [ 0.422284] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 >> [ 0.422354] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported >> [ 0.422368] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X >> [ 0.422405] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 >> [ 0.422406] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.422407] usb usb3: Product: xHCI Host Controller >> [ 0.422408] usb usb3: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd >> [ 0.422409] usb usb3: SerialNumber: 0000:00:14.0 >> [ 0.422458] hub 3-0:1.0: USB hub found >> [ 0.422467] hub 3-0:1.0: 10 ports detected >> [ 0.424009] xhci_hcd 0000:00:14.0: xHCI Host Controller >> [ 0.424031] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 >> [ 0.424050] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 >> [ 0.424051] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 >> [ 0.424052] usb usb4: Product: xHCI Host Controller >> [ 0.424053] usb usb4: Manufacturer: Linux 3.10.0-123.el7.x86_64 xhci_hcd >> [ 0.424054] usb usb4: SerialNumber: 0000:00:14.0 >> [ 0.424105] hub 4-0:1.0: USB hub found >> [ 0.424109] hub 4-0:1.0: 2 ports detected >> [ 0.428057] usbcore: registered new interface driver usbserial >> [ 0.428061] usbcore: registered new interface driver usbserial_generic >> [ 0.428065] usbserial: USB Serial support registered for generic >> [ 0.428084] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 >> [ 0.428425] serio: i8042 KBD port at 0x60,0x64 irq 1 >> [ 0.428428] serio: i8042 AUX port at 0x60,0x64 irq 12 >> [ 0.428470] mousedev: PS/2 mouse device common for all mice >> [ 0.428557] rtc_cmos 00:06: RTC can wake from S4 >> [ 0.428650] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 >> [ 0.428673] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs >> [ 0.428679] Intel P-state driver initializing. >> [ 0.428686] Intel pstate controlling: cpu 0 >> [ 0.428696] Intel pstate controlling: cpu 1 >> [ 0.428702] Intel pstate controlling: cpu 2 >> [ 0.428710] Intel pstate controlling: cpu 3 >> [ 0.428772] cpuidle: using governor menu >> [ 0.429060] EFI Variables Facility v0.08 2004-May-17 >> [ 0.432153] hidraw: raw HID events driver (C) Jiri Kosina >> [ 0.432198] usbcore: registered new interface driver usbhid >> [ 0.432199] usbhid: USB HID core driver >> [ 0.432217] drop_monitor: Initializing network drop monitor service >> [ 0.432264] TCP: cubic registered >> [ 0.432265] Initializing XFRM netlink socket >> [ 0.432307] NET: Registered protocol family 10 >> [ 0.432394] NET: Registered protocol family 17 >> [ 0.432555] Loading compiled-in X.509 certificates >> [ 0.432573] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717' >> [ 0.432582] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b' >> [ 0.432929] Loaded X.509 cert 'CentOS Linux kernel signing key: bc83d0fe70c62fab1c58b4ebaa95e3936128fcf4' >> [ 0.433053] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.system_keyring' >> [ 0.433065] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.system_keyring' >> [ 0.433161] EFI: Loaded cert 'Red Hat Inc.: 1ff96dd8d1b2327228c04b03a772dbb2dbb79b1f' linked to '.system_keyring' >> [ 0.433241] registered taskstats version 1 >> [ 0.434522] Key type trusted registered >> [ 0.435694] Key type encrypted registered >> [ 0.437223] IMA: No TPM chip found, activating TPM-bypass! >> [ 0.437711] rtc_cmos 00:06: setting system clock to 2015-01-21 13:18:01 UTC (1421846281) >> [ 0.438214] Freeing unused kernel memory: 1584k freed >> [ 0.445940] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) >> [ 0.446072] systemd[1]: Running in initial RAM disk. >> [ 0.446107] systemd[1]: Set hostname to <lx-cenb.cenb.local>. >> [ 0.448642] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 >> [ 0.461386] systemd[1]: Expecting device dev-disk-by\x2duuid-6212bbac\x2d61a9\x2d4f9a\x2d97a9\x2d6fa34a7b2606.device... >> [ 0.461395] systemd[1]: Starting -.slice. >> [ 0.461482] systemd[1]: Created slice -.slice. >> [ 0.461505] systemd[1]: Starting System Slice. >> [ 0.461544] systemd[1]: Created slice System Slice. >> [ 0.461562] systemd[1]: Starting Slices. >> [ 0.461567] systemd[1]: Reached target Slices. >> [ 0.461582] systemd[1]: Starting Timers. >> [ 0.461587] systemd[1]: Reached target Timers. >> [ 0.461602] systemd[1]: Starting Journal Socket. >> [ 0.461631] systemd[1]: Listening on Journal Socket. >> [ 0.461715] systemd[1]: Starting dracut cmdline hook... >> [ 0.461940] systemd[1]: Started Load Kernel Modules. >> [ 0.461950] systemd[1]: Starting Setup Virtual Console... >> [ 0.462151] systemd[1]: Starting Journal Service... >> [ 0.462351] systemd[1]: Started Journal Service. >> [ 0.464889] systemd-journald[105]: Vacuuming done, freed 0 bytes >> [ 0.535418] device-mapper: uevent: version 1.0.3 >> [ 0.535458] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel(a)redhat.com <mailto:dm-devel@redhat.com> >> [ 0.552678] systemd-udevd[255]: starting version 208 >> [ 0.571038] sky2: driver version 1.30 >> [ 0.571055] sky2 0000:02:00.0: enabling device (0000 -> 0003) >> [ 0.571127] sky2 0000:02:00.0: Yukon-2 EC chip revision 2 >> [ 0.571173] sky2 0000:02:00.0: irq 46 for MSI/MSI-X >> [ 0.571458] sky2 0000:02:00.0 eth0: addr 00:50:43:00:45:3e >> [ 0.572014] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded >> [ 0.573556] ACPI: bus type ATA registered >> [ 0.573891] libata version 3.00 loaded. >> [ 0.574366] r8169 0000:03:00.0: irq 47 for MSI/MSI-X >> [ 0.574439] [drm] Initialized drm 1.1.0 20060810 >> [ 0.574492] r8169 0000:03:00.0 eth1: RTL8168g/8111g at 0xffffc90000048000, 74:27:ea:7e:9a:3e, XID 0c000800 IRQ 47 >> [ 0.574494] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] >> [ 0.575532] ahci 0000:00:1f.2: version 3.0 >> [ 0.575626] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X >> [ 0.575667] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x33 impl SATA mode >> [ 0.575669] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems >> [ 0.582134] scsi0 : ahci >> [ 0.582216] scsi1 : ahci >> [ 0.582260] scsi2 : ahci >> [ 0.582302] scsi3 : ahci >> [ 0.582436] scsi4 : ahci >> [ 0.582555] scsi5 : ahci >> [ 0.582624] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 48 >> [ 0.582626] ata2: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a180 irq 48 >> [ 0.582627] ata3: DUMMY >> [ 0.582628] ata4: DUMMY >> [ 0.582629] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 48 >> [ 0.582631] ata6: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a380 irq 48 >> [ 0.586809] [drm] Memory usable by graphics device = 2048M >> [ 0.586812] checking generic (e0000000 57f000) vs hw (e0000000 10000000) >> [ 0.586813] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver >> [ 0.586832] Console: switching to colour dummy device 80x25 >> [ 0.608828] i915 0000:00:02.0: irq 49 for MSI/MSI-X >> [ 0.608834] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >> [ 0.608835] [drm] Driver supports precise vblank timestamp query. >> [ 0.608876] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem >> [ 0.616159] systemd-udevd[263]: renamed network interface eth0 to enp2s0 >> [ 0.625136] systemd-udevd[258]: renamed network interface eth1 to enp3s0 >> [ 0.645342] fbcon: inteldrmfb (fb0) is primary device >> [ 0.714011] usb 1-1: new high-speed USB device number 2 using ehci-pci >> [ 0.810014] Console: switching to colour frame buffer device 200x56 >> [ 0.812417] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device >> [ 0.812418] i915 0000:00:02.0: registered panic notifier >> [ 0.818293] acpi device:58: registered as cooling_device9 >> [ 0.818317] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) >> [ 0.818341] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 >> [ 0.818413] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 >> [ 0.828317] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 >> [ 0.828319] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >> [ 0.828453] hub 1-1:1.0: USB hub found >> [ 0.828562] hub 1-1:1.0: 4 ports detected >> [ 0.851536] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 >> [ 0.886980] ata6: SATA link down (SStatus 0 SControl 300) >> [ 0.886996] ata2: SATA link down (SStatus 0 SControl 300) >> [ 0.887953] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) >> [ 0.887969] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> [ 0.889289] ata1.00: ATA-8: ST31000524AS, JC4B, max UDMA/133 >> [ 0.889292] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) >> [ 0.890833] ata1.00: configured for UDMA/133 >> [ 0.890949] scsi 0:0:0:0: Direct-Access ATA ST31000524AS JC4B PQ: 0 ANSI: 5 >> [ 0.895913] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded >> [ 0.895916] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out >> [ 0.895918] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out >> [ 0.896989] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN01, max UDMA/133 >> [ 0.901740] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded >> [ 0.901744] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out >> [ 0.901746] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out >> [ 0.902846] ata5.00: configured for UDMA/133 >> [ 0.908633] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN01 PQ: 0 ANSI: 5 >> [ 0.913461] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >> [ 0.913563] sd 0:0:0:0: [sda] Write Protect is off >> [ 0.913566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >> [ 0.913590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA >> [ 0.927218] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray >> [ 0.927221] cdrom: Uniform CD-ROM driver Revision: 3.20 >> [ 0.927326] sr 4:0:0:0: Attached scsi CD-ROM sr0 >> [ 0.930944] usb 2-1: new high-speed USB device number 2 using ehci-pci >> [ 0.957906] sda: sda1 sda2 sda3 >> [ 0.958501] sd 0:0:0:0: [sda] Attached SCSI disk >> [ 1.045263] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 >> [ 1.045265] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >> [ 1.045526] hub 2-1:1.0: USB hub found >> [ 1.045622] hub 2-1:1.0: 6 ports detected >> [ 1.298299] bio: create slab <bio-1> at 1 >> [ 1.358816] tsc: Refined TSC clocksource calibration: 3092.838 MHz >> [ 1.358820] Switching to clocksource tsc >> [ 1.427899] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 >> [ 1.638118] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled >> [ 1.655065] XFS (dm-1): Mounting Filesystem >> [ 1.710838] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off >> [ 1.730961] XFS (dm-1): Starting recovery (logdev: internal) >> [ 1.800475] XFS (dm-1): Ending recovery (logdev: internal) >> [ 2.043386] systemd-journald[105]: Received SIGTERM >> [ 2.433172] SELinux: Disabled at runtime. >> [ 2.433188] SELinux: Unregistering netfilter hooks >> [ 2.453626] type=1404 audit(1421846283.515:2): selinux=0 auid=4294967295 ses=4294967295 >> [ 2.533548] systemd[1]: RTC configured in localtime, applying delta of -120 minutes to system time. >> [ 4.910823] systemd-journald[502]: Vacuuming done, freed 0 bytes >> [ 5.418360] RPC: Registered named UNIX socket transport module. >> [ 5.418362] RPC: Registered udp transport module. >> [ 5.418363] RPC: Registered tcp transport module. >> [ 5.418364] RPC: Registered tcp NFSv4.1 backchannel transport module. >> [ 5.653811] Installing knfsd (copyright (C) 1996 okir(a)monad.swb.de <mailto:okir@monad.swb.de>). >> [ 5.825641] systemd-udevd[543]: starting version 208 >> [ 5.948570] wmi: Mapper loaded >> [ 6.091263] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 >> [ 6.091759] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182f conflicts with OpRegion 0x0000000000001800-0x000000000000187f (\PMIO) (20130517/utaddress-254) >> [ 6.091764] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >> [ 6.091766] ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20130517/utaddress-254) >> [ 6.091768] ACPI Warning: SystemIO range 0x0000000000001c30-0x0000000000001c3f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20130517/utaddress-254) >> [ 6.091770] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >> [ 6.091771] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001c3f (\GPRL) (20130517/utaddress-254) >> [ 6.091773] ACPI Warning: SystemIO range 0x0000000000001c00-0x0000000000001c2f conflicts with OpRegion 0x0000000000001c00-0x0000000000001fff (\GPR_) (20130517/utaddress-254) >> [ 6.091774] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >> [ 6.091775] lpc_ich: Resource conflict(s) found affecting gpio_ich >> [ 6.190543] input: PC Speaker as /devices/platform/pcspkr/input/input5 >> [ 6.281317] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20130517/utaddress-254) >> [ 6.281322] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver >> [ 6.303804] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X >> [ 6.655460] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002) >> [ 6.655572] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X >> [ 6.655611] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) >> [ 6.655671] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X >> [ 6.665133] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6 >> [ 6.673355] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7 >> [ 6.673400] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 >> [ 6.673425] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 >> [ 6.673458] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 >> [ 6.673485] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 >> [ 6.925676] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) >> [ 6.975776] iTCO_vendor_support: vendor-support=0 >> [ 6.976377] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 >> [ 6.976400] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) >> [ 6.976486] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >> [ 7.155967] alg: No test for crc32 (crc32-pclmul) >> [ 8.169504] XFS (sda2): Mounting Filesystem >> [ 8.458500] Adding 8142844k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:8142844k FS >> [ 8.613450] XFS (sda2): Ending clean mount >> [ 8.805978] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. >> [ 9.016790] XFS (dm-2): Mounting Filesystem >> [ 10.554513] XFS (dm-2): Ending clean mount >> [ 10.701631] systemd-journald[502]: Received request to flush runtime journal from PID 1 >> [ 10.705642] type=1305 audit(1421853491.770:3): audit_pid=763 old=0 auid=4294967295 ses=4294967295 res=1 >> [ 11.221459] sd 0:0:0:0: Attached scsi generic sg0 type 0 >> [ 11.221482] sr 4:0:0:0: Attached scsi generic sg1 type 5 >> [ 12.429406] sky2 0000:02:00.0 enp2s0: enabling interface >> [ 12.429475] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready >> [ 12.551950] r8169 0000:03:00.0 enp3s0: link down >> [ 12.551965] r8169 0000:03:00.0 enp3s0: link down >> [ 12.551987] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready >> [ 14.201270] r8169 0000:03:00.0 enp3s0: link up >> [ 14.201277] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready >> [ 14.582011] Ebtables v2.0 registered >> [ 14.587104] ip_tables: (C) 2000-2006 Netfilter Core Team >> [ 14.592056] ip6_tables: (C) 2000-2006 Netfilter Core Team >> >>> Em 21/01/2015, à(s) 13:48, Roberto Ferreira Lauretti <lauretti(a)ccuec.unicamp.br <mailto:lauretti@ccuec.unicamp.br>> escreveu: >>> >>> Boa tarde, >>> >>> Qual a mensagem de erro no dmesg? >>> On 21-01-2015 13:46, Gabriel Franca wrote: >>>> Boa Tarde Galera, >>>> >>>> Estou com uma dificuldade fiz a instalação do centos 7 atualizei e estou tentando instalar e configurar o Virtualbox. >>>> >>>> fiz toda a instalação, mais quando executo o comando /etc/init.d/vboxdrv setup tenho o seguinte retorno. >>>> >>>> /etc/init.d/vboxdrv setup >>>> Stopping VirtualBox kernel modules [ OK ] >>>> Recompiling VirtualBox kernel modules [ OK ] >>>> Starting VirtualBox kernel modules [FALHOU] >>>> (modprobe vboxdrv failed. Please use 'dmesg' to find out why) >>>> >>>> Alguém já conseguiu instalar o virtualbox no centos 7 ? >>>> >>>> Tentei esse tutorial tbm mais deu o mesmo erro. >>>> >>>> http://www.itzgeek.com/how-tos/linux/centos-how-tos/install-virtualbox-4-3-… <http://www.itzgeek.com/how-tos/linux/centos-how-tos/install-virtualbox-4-3-…> >>>> >>>> >>>> Atenciosamente, >>>> >>>> Gabriel Franca >>>> >>>> >>>> _______________________________________________ >>>> CentOS-pt-br mailing list >>>> CentOS-pt-br(a)centos.org <mailto:CentOS-pt-br@centos.org> >>>> http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br> >>> >>> _______________________________________________ >>> CentOS-pt-br mailing list >>> CentOS-pt-br(a)centos.org <mailto:CentOS-pt-br@centos.org> >>> http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br> >> >> >> >> _______________________________________________ >> CentOS-pt-br mailing list >> CentOS-pt-br(a)centos.org <mailto:CentOS-pt-br@centos.org> >> http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br> > > _______________________________________________ > CentOS-pt-br mailing list > CentOS-pt-br(a)centos.org <mailto:CentOS-pt-br@centos.org> > http://lists.centos.org/mailman/listinfo/centos-pt-br <http://lists.centos.org/mailman/listinfo/centos-pt-br>

10 years, 3 months