[Arm-dev] Bananapi / C7

[Nicolas Repentin]

For the UUID, you can find it with : ls -l /dev/disk/by-uuid and take the UUID associated by your partition.

I will try regenerating initramfs asap.


Nicolas Repentin
<nicolas at shivaserv.fr>


24 août 2015 16:11 "Robert Moskowitz" <rgm at htt-consult.com> a écrit:
> On 08/24/2015 10:00 AM, Mandar Joshi wrote:
> 
>>> I've tried booting on 4.2.0-0:
>>> 
>>> Boot get a long time on "Mounted Configuration File System", before get like
>>> Robert:
>> 
>> I tested the new kernel on my Cubietruck and was able to boot after
>> manually generating the initramfs using the command
>> 
>> ----------------------------------------------------------------------------------------------------
>> ------------------------
>> dracut --verbose
>> /boot/initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img
>> 4.2.0-0.rc2.git0.1.centos.el7.armv7hl
>> ----------------------------------------------------------------------------------------------------
>> ------------------------
>> 
>> I have the package dracut-config-generic-033-240.el7.armv7hl
>> installed. Make sure you have it too. I am not sure if that's the
>> source of the problem.
>> 
>> The entry in /boot/extlinux/extlinux.conf created by the rbfkernelup
>> yum plugin is
>> ----------------------------------------------------------------------------------------------------
>> ------------------------
>> label Derived from Red Hat Enterprise Linux 7.1 (Source)
>> 4.2.0-0.rc2.git0.1.centos.el7.armv7hl
>> kernel /vmlinuz-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
>> append enforcing=0 root=UUID=34fa4504-d4ae-4d17-9c07-4c56a5f8f614
>> fdtdir /dtb-4.2.0-0.rc2.git0.1.centos.el7.armv7hl
>> initrd /initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img
>> ----------------------------------------------------------------------------------------------------
>> ------------------------
>> You will have the change the UUID as per your board.
> 
> How do I find out my UUID?
> 
>> However, I am not able to use ethernet with the new kernel. I haven't
>> looked into it in detail but preliminary debugging shows the module
>> stmmac_platform.ko not loading. I get this error
> 
> Not good. I will wait for your progress on this. I have some samba things to work on right now.
> 
>> ----------------------------------------------------------------------------------------------------
>> ------------------------
>> [root at cubietruck ~]# modprobe stmmac_platform
>> [ 114.508483] stmmac_platform: Unknown symbol devm_kmalloc (err 0)
>> [ 114.521212] stmmac_platform: Unknown symbol stmmac_suspend (err 0)
>> [ 114.533718] stmmac_platform: Unknown symbol platform_get_irq_byname (err 0)
>> [ 114.546855] stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0)
>> [ 114.559331] stmmac_platform: Unknown symbol platform_get_resource (err 0)
>> [ 114.572149] stmmac_platform: Unknown symbol of_get_phy_mode (err 0)
>> [ 114.584331] stmmac_platform: Unknown symbol of_property_read_u32_array (err 0)
>> [ 114.597508] stmmac_platform: Unknown symbol of_alias_get_id (err 0)
>> [ 114.609629] stmmac_platform: Unknown symbol stmmac_resume (err 0)
>> [ 114.621533] stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0)
>> modprobe: ERROR: could not insert 'stmmac_platform': Unknown symbol in
>> module, or unknown parameter (see dmesg)
>> ----------------------------------------------------------------------------------------------------
>> ------------------------
>> 
>> Regards
>> Mandar Joshi
>> _______________________________________________
>> Arm-dev mailing list
>> Arm-dev at centos.org
>> http://lists.centos.org/mailman/listinfo/arm-dev
> 
> _______________________________________________
> Arm-dev mailing list
> Arm-dev at centos.org
> http://lists.centos.org/mailman/listinfo/arm-dev