For the UUID, you can find it with : ls -l /dev/disk/by-uuid and take the UUID associated by your partition. I will try regenerating initramfs asap. Nicolas Repentin <nicolas at shivaserv.fr> 24 août 2015 16:11 "Robert Moskowitz" <rgm at htt-consult.com> a écrit: > On 08/24/2015 10:00 AM, Mandar Joshi wrote: > >>> I've tried booting on 4.2.0-0: >>> >>> Boot get a long time on "Mounted Configuration File System", before get like >>> Robert: >> >> I tested the new kernel on my Cubietruck and was able to boot after >> manually generating the initramfs using the command >> >> ---------------------------------------------------------------------------------------------------- >> ------------------------ >> dracut --verbose >> /boot/initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img >> 4.2.0-0.rc2.git0.1.centos.el7.armv7hl >> ---------------------------------------------------------------------------------------------------- >> ------------------------ >> >> I have the package dracut-config-generic-033-240.el7.armv7hl >> installed. Make sure you have it too. I am not sure if that's the >> source of the problem. >> >> The entry in /boot/extlinux/extlinux.conf created by the rbfkernelup >> yum plugin is >> ---------------------------------------------------------------------------------------------------- >> ------------------------ >> label Derived from Red Hat Enterprise Linux 7.1 (Source) >> 4.2.0-0.rc2.git0.1.centos.el7.armv7hl >> kernel /vmlinuz-4.2.0-0.rc2.git0.1.centos.el7.armv7hl >> append enforcing=0 root=UUID=34fa4504-d4ae-4d17-9c07-4c56a5f8f614 >> fdtdir /dtb-4.2.0-0.rc2.git0.1.centos.el7.armv7hl >> initrd /initramfs-4.2.0-0.rc2.git0.1.centos.el7.armv7hl.img >> ---------------------------------------------------------------------------------------------------- >> ------------------------ >> You will have the change the UUID as per your board. > > How do I find out my UUID? > >> However, I am not able to use ethernet with the new kernel. I haven't >> looked into it in detail but preliminary debugging shows the module >> stmmac_platform.ko not loading. I get this error > > Not good. I will wait for your progress on this. I have some samba things to work on right now. > >> ---------------------------------------------------------------------------------------------------- >> ------------------------ >> [root at cubietruck ~]# modprobe stmmac_platform >> [ 114.508483] stmmac_platform: Unknown symbol devm_kmalloc (err 0) >> [ 114.521212] stmmac_platform: Unknown symbol stmmac_suspend (err 0) >> [ 114.533718] stmmac_platform: Unknown symbol platform_get_irq_byname (err 0) >> [ 114.546855] stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0) >> [ 114.559331] stmmac_platform: Unknown symbol platform_get_resource (err 0) >> [ 114.572149] stmmac_platform: Unknown symbol of_get_phy_mode (err 0) >> [ 114.584331] stmmac_platform: Unknown symbol of_property_read_u32_array (err 0) >> [ 114.597508] stmmac_platform: Unknown symbol of_alias_get_id (err 0) >> [ 114.609629] stmmac_platform: Unknown symbol stmmac_resume (err 0) >> [ 114.621533] stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0) >> modprobe: ERROR: could not insert 'stmmac_platform': Unknown symbol in >> module, or unknown parameter (see dmesg) >> ---------------------------------------------------------------------------------------------------- >> ------------------------ >> >> Regards >> Mandar Joshi >> _______________________________________________ >> Arm-dev mailing list >> Arm-dev at centos.org >> http://lists.centos.org/mailman/listinfo/arm-dev > > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > http://lists.centos.org/mailman/listinfo/arm-dev