On 12/24/2015 05:39 PM, david wrote: > Folks > > I'm playing with a Raspberry Pi 2 and Centos. Here are some issues > I've bumped into. I'm not sure this is the right medium for > commenting; please correct me if needed. > > I wrote a copy of the distributed image (1151) to my MicroSD card, > then turned on the Rpi2. > > Issue 1: > Even though my DHCP server was configured to give the node a name, > it showed up as "rpi2" as the host name. I use: hostnamectl set-hostname <fqdn> There are lots of places where hostname is and this controls all of them. Or so I have been told. > > Issue 2: > Network works, but if I issue the command > systemctl reset network > the command fails and I haven't found a way to get the network > back. I saved the output of "journalctl -ce", rebooted, and installed > "ftp" so I could copy the data to a real machine. The text is as below. > I issued the "systemctl reset network" command towards the bottom, > where you see the time jump from 00:01:01 to 00:02:28 > > > > -------------------------------------------------------------- > > -- Logs begin at Thu 1970-01-01 00:00:04 UTC, end at Thu 1970-01-01 > 00:02:28 UTC. -- > Jan 01 00:00:04 rpi2 systemd-journal[81]: Runtime journal is using > 5.7M (max allowed 46.3M, trying to leave 69.4M free of 457.1M > available ? current limit 46.3M). > Jan 01 00:00:04 rpi2 systemd-journal[81]: Runtime journal is using > 5.7M (max allowed 46.3M, trying to leave 69.4M free of 457.1M > available ? current limit 46.3M). > Jan 01 00:00:04 rpi2 kernel: Booting Linux on physical CPU 0xf00 > Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys cpuset > Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys cpu > Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys cpuacct > Jan 01 00:00:04 rpi2 kernel: Linux version 4.1.11-v7+ > (dc4 at dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) > (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #822 SMP > PREEMPT Fri Oct 23 16:22:18 BST 2015 > Jan 01 00:00:04 rpi2 kernel: CPU: ARMv7 Processor [410fc075] revision > 5 (ARMv7), cr=10c5387d > Jan 01 00:00:04 rpi2 kernel: CPU: PIPT / VIPT nonaliasing data cache, > VIPT aliasing instruction cache > Jan 01 00:00:04 rpi2 kernel: Machine: BCM2709 > Jan 01 00:00:04 rpi2 kernel: cma: Reserved 8 MiB at 0x3a800000 > Jan 01 00:00:04 rpi2 kernel: Memory policy: Data cache writealloc > Jan 01 00:00:04 rpi2 kernel: On node 0 totalpages: 241664 > Jan 01 00:00:04 rpi2 kernel: free_area_init_node: node 0, pgdat > 80859000, node_mem_map b9fa6000 > Jan 01 00:00:04 rpi2 kernel: Normal zone: 2124 pages used for memmap > Jan 01 00:00:04 rpi2 kernel: Normal zone: 0 pages reserved > Jan 01 00:00:04 rpi2 kernel: Normal zone: 241664 pages, LIFO batch:31 > Jan 01 00:00:04 rpi2 kernel: [bcm2709_smp_init_cpus] enter > (9420->f3003010) > Jan 01 00:00:04 rpi2 kernel: [bcm2709_smp_init_cpus] ncores=4 > Jan 01 00:00:04 rpi2 kernel: PERCPU: Embedded 13 pages/cpu @b9f6d000 > s20608 r8192 d24448 u53248 > Jan 01 00:00:04 rpi2 kernel: pcpu-alloc: s20608 r8192 d24448 u53248 > alloc=13*4096 > Jan 01 00:00:04 rpi2 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > Jan 01 00:00:04 rpi2 kernel: Built 1 zonelists in Zone order, mobility > grouping on. Total pages: 239540 > Jan 01 00:00:04 rpi2 kernel: Kernel command line: dma.dmachans=0x7f35 > bcm2708_fb.fbwidth=1872 bcm2708_fb.fbheight=1168 > bcm2709.boardrev=0xa21041 bcm2709.serial=0x72e14965 > smsc95xx.macaddr=B8:27:EB:E1:49:65 bcm2708_fb.fbswap=1 > bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 > sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 > vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 > console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p3 > rootfstype=ext4 elevator=deadline rootwait > Jan 01 00:00:04 rpi2 kernel: PID hash table entries: 4096 (order: 2, > 16384 bytes) > Jan 01 00:00:04 rpi2 kernel: Dentry cache hash table entries: 131072 > (order: 7, 524288 bytes) > Jan 01 00:00:04 rpi2 kernel: Inode-cache hash table entries: 65536 > (order: 6, 262144 bytes) > Jan 01 00:00:04 rpi2 kernel: Memory: 939572K/966656K available (5955K > kernel code, 534K rwdata, 1644K rodata, 416K init, 757K bss, 18892K > reserved, 8192K cma-reserved) > Jan 01 00:00:04 rpi2 kernel: Virtual kernel memory layout: > vector : 0xffff0000 - 0xffff1000 > ( 4 kB) > fixmap : 0xffc00000 - 0xfff00000 > (3072 kB) > vmalloc : 0xbb800000 - 0xff000000 > (1080 MB) > lowmem : 0x80000000 - 0xbb000000 ( > 944 MB) > modules : 0x7f000000 - 0x80000000 > ( 16 MB) > .text : 0x80008000 - 0x80773e88 > (7600 kB) > .init : 0x80774000 - 0x807dc000 ( > 416 kB) > .data : 0x807dc000 - 0x80861b6c ( > 535 kB) > .bss : 0x80864000 - 0x8092179c ( > 758 kB) > Jan 01 00:00:04 rpi2 kernel: SLUB: HWalign=64, Order=0-3, > MinObjects=0, CPUs=4, Nodes=1 > Jan 01 00:00:04 rpi2 kernel: Preemptible hierarchical RCU implementation. > Jan 01 00:00:04 rpi2 kernel: Additional per-CPU info printed > with stalls. > Jan 01 00:00:04 rpi2 kernel: NR_IRQS:608 > Jan 01 00:00:04 rpi2 kernel: Architected cp15 timer(s) running at > 19.20MHz (phys). > Jan 01 00:00:04 rpi2 kernel: clocksource arch_sys_counter: mask: > 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns > Jan 01 00:00:04 rpi2 kernel: sched_clock: 56 bits at 19MHz, resolution > 52ns, wraps every 4398046511078ns > Jan 01 00:00:04 rpi2 kernel: Switching to timer-based delay loop, > resolution 52ns > Jan 01 00:00:04 rpi2 kernel: Console: colour dummy device 80x30 > Jan 01 00:00:04 rpi2 kernel: console [tty1] enabled > Jan 01 00:00:04 rpi2 kernel: Calibrating delay loop (skipped), value > calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) > Jan 01 00:00:04 rpi2 kernel: pid_max: default: 32768 minimum: 301 > Jan 01 00:00:04 rpi2 kernel: Mount-cache hash table entries: 2048 > (order: 1, 8192 bytes) > Jan 01 00:00:04 rpi2 kernel: Mountpoint-cache hash table entries: 2048 > (order: 1, 8192 bytes) > Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys blkio > Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys memory > Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys devices > Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys freezer > Jan 01 00:00:04 rpi2 kernel: Initializing cgroup subsys net_cls > Jan 01 00:00:04 rpi2 kernel: CPU: Testing write buffer coherency: ok > Jan 01 00:00:04 rpi2 kernel: ftrace: allocating 20224 entries in 60 pages > Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 0 > Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 1 > Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 2 > Jan 01 00:00:04 rpi2 kernel: missing device node for CPU 3 > Jan 01 00:00:04 rpi2 kernel: CPU0: thread -1, cpu 0, socket 15, mpidr > 80000f00 > Jan 01 00:00:04 rpi2 kernel: [bcm2709_smp_prepare_cpus] enter > Jan 01 00:00:04 rpi2 kernel: Setting up static identity map for 0x8240 > - 0x8274 > Jan 01 00:00:04 rpi2 kernel: [bcm2709_boot_secondary] cpu:1 started > (0) 16 > Jan 01 00:00:04 rpi2 kernel: [bcm2709_secondary_init] enter cpu:1 > Jan 01 00:00:04 rpi2 kernel: CPU1: thread -1, cpu 1, socket 15, mpidr > 80000f01 > Jan 01 00:00:04 rpi2 kernel: [bcm2709_boot_secondary] cpu:2 started > (0) 18 > Jan 01 00:00:04 rpi2 kernel: [bcm2709_secondary_init] enter cpu:2 > Jan 01 00:00:04 rpi2 kernel: CPU2: thread -1, cpu 2, socket 15, mpidr > 80000f02 > Jan 01 00:00:04 rpi2 kernel: [bcm2709_boot_secondary] cpu:3 started > (0) 18 > Jan 01 00:00:04 rpi2 kernel: [bcm2709_secondary_init] enter cpu:3 > Jan 01 00:00:04 rpi2 kernel: CPU3: thread -1, cpu 3, socket 15, mpidr > 80000f03 > Jan 01 00:00:04 rpi2 kernel: Brought up 4 CPUs > Jan 01 00:00:04 rpi2 kernel: SMP: Total of 4 processors activated > (153.60 BogoMIPS). > Jan 01 00:00:04 rpi2 kernel: CPU: All CPU(s) started in HYP mode. > Jan 01 00:00:04 rpi2 kernel: CPU: Virtualization extensions available. > Jan 01 00:00:04 rpi2 kernel: devtmpfs: initialized > Jan 01 00:00:04 rpi2 kernel: VFP support v0.3: implementor 41 > architecture 2 part 30 variant 7 rev 5 > Jan 01 00:00:04 rpi2 kernel: clocksource jiffies: mask: 0xffffffff > max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns > Jan 01 00:00:04 rpi2 kernel: pinctrl core: initialized pinctrl subsystem > Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 16 > Jan 01 00:00:04 rpi2 kernel: DMA: preallocated 4096 KiB pool for > atomic coherent allocations > Jan 01 00:00:04 rpi2 kernel: bcm2709.uart_clock = 3000000 > Jan 01 00:00:04 rpi2 kernel: of_platform_populate failed: -22 > Jan 01 00:00:04 rpi2 kernel: hw-breakpoint: found 5 (+1 reserved) > breakpoint and 4 watchpoint registers. > Jan 01 00:00:04 rpi2 kernel: hw-breakpoint: maximum watchpoint size is > 8 bytes. > Jan 01 00:00:04 rpi2 kernel: Serial: AMBA PL011 UART driver > Jan 01 00:00:04 rpi2 kernel: dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = > 83, base_baud = 0) is a PL011 rev3 > Jan 01 00:00:04 rpi2 kernel: console [ttyAMA0] enabled > Jan 01 00:00:04 rpi2 kernel: bcm2835-mbox bcm2835-mbox: mailbox enabled > Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: DMA > legacy API manager at f3007000, dmachans=0x7f35 > Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: > failed to get irq for DMA channel 13 > Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: > Initialized 8 DMA channels (+ 1 legacy) > Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: Load > BCM2835 DMA engine driver > Jan 01 00:00:04 rpi2 kernel: bcm2708-dmaengine bcm2708-dmaengine: > dma_debug:0 > Jan 01 00:00:04 rpi2 kernel: SCSI subsystem initialized > Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver > usbfs > Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver hub > Jan 01 00:00:04 rpi2 kernel: usbcore: registered new device driver usb > Jan 01 00:00:04 rpi2 kernel: raspberrypi-firmware > raspberrypi-firmware.0: Attached to firmware from 2015-10-23 16:24 > Jan 01 00:00:04 rpi2 kernel: Switched to clocksource arch_sys_counter > Jan 01 00:00:04 rpi2 kernel: FS-Cache: Loaded > Jan 01 00:00:04 rpi2 kernel: CacheFiles: Loaded > Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 2 > Jan 01 00:00:04 rpi2 kernel: TCP established hash table entries: 8192 > (order: 3, 32768 bytes) > Jan 01 00:00:04 rpi2 kernel: TCP bind hash table entries: 8192 (order: > 4, 65536 bytes) > Jan 01 00:00:04 rpi2 kernel: TCP: Hash tables configured (established > 8192 bind 8192) > Jan 01 00:00:04 rpi2 kernel: UDP hash table entries: 512 (order: 2, > 16384 bytes) > Jan 01 00:00:04 rpi2 kernel: UDP-Lite hash table entries: 512 (order: > 2, 16384 bytes) > Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 1 > Jan 01 00:00:04 rpi2 kernel: RPC: Registered named UNIX socket > transport module. > Jan 01 00:00:04 rpi2 kernel: RPC: Registered udp transport module. > Jan 01 00:00:04 rpi2 kernel: RPC: Registered tcp transport module. > Jan 01 00:00:04 rpi2 kernel: RPC: Registered tcp NFSv4.1 backchannel > transport module. > Jan 01 00:00:04 rpi2 kernel: bcm2708_gpio: bcm2708_gpio_probe 80800a68 > Jan 01 00:00:04 rpi2 kernel: futex hash table entries: 1024 (order: 4, > 65536 bytes) > Jan 01 00:00:04 rpi2 kernel: VFS: Disk quotas dquot_6.6.0 > Jan 01 00:00:04 rpi2 kernel: VFS: Dquot-cache hash table entries: 1024 > (order 0, 4096 bytes) > Jan 01 00:00:04 rpi2 kernel: FS-Cache: Netfs 'nfs' registered for caching > Jan 01 00:00:04 rpi2 kernel: NFS: Registering the id_resolver key type > Jan 01 00:00:04 rpi2 kernel: Key type id_resolver registered > Jan 01 00:00:04 rpi2 kernel: Key type id_legacy registered > Jan 01 00:00:04 rpi2 kernel: Block layer SCSI generic (bsg) driver > version 0.4 loaded (major 252) > Jan 01 00:00:04 rpi2 kernel: io scheduler noop registered > Jan 01 00:00:04 rpi2 kernel: io scheduler deadline registered (default) > Jan 01 00:00:04 rpi2 kernel: io scheduler cfq registered > Jan 01 00:00:04 rpi2 kernel: BCM2708FB: allocated DMA memory fac00000 > Jan 01 00:00:04 rpi2 kernel: BCM2708FB: allocated DMA channel 0 @ > f3007000 > Jan 01 00:00:04 rpi2 kernel: Console: switching to colour frame buffer > device 234x73 > Jan 01 00:00:04 rpi2 kernel: Serial: 8250/16550 driver, 0 ports, IRQ > sharing disabled > Jan 01 00:00:04 rpi2 kernel: vc-cma: Videocore CMA driver > Jan 01 00:00:04 rpi2 kernel: vc-cma: vc_cma_base = 0x00000000 > Jan 01 00:00:04 rpi2 kernel: vc-cma: vc_cma_size = 0x00000000 (0 > MiB) > Jan 01 00:00:04 rpi2 kernel: vc-cma: vc_cma_initial = 0x00000000 (0 > MiB) > Jan 01 00:00:04 rpi2 kernel: vc-mem: phys_addr:0x00000000 > mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) > Jan 01 00:00:04 rpi2 kernel: brd: module loaded > Jan 01 00:00:04 rpi2 kernel: loop: module loaded > Jan 01 00:00:04 rpi2 kernel: vchiq: vchiq_init_state: slot_zero = > 0xbac80000, is_master = 0 > Jan 01 00:00:04 rpi2 kernel: Loading iSCSI transport class v2.0-870. > Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver > smsc95xx > Jan 01 00:00:04 rpi2 kernel: dwc_otg: version 3.00a 10-AUG-2012 > (platform bus) > Jan 01 00:00:04 rpi2 kernel: Core Release: 2.80a > Jan 01 00:00:04 rpi2 kernel: Setting default values for core params > Jan 01 00:00:04 rpi2 kernel: Finished setting default values for core > params > Jan 01 00:00:04 rpi2 kernel: Using Buffer DMA mode > Jan 01 00:00:04 rpi2 kernel: Periodic Transfer Interrupt Enhancement - > disabled > Jan 01 00:00:04 rpi2 kernel: Multiprocessor Interrupt Enhancement - > disabled > Jan 01 00:00:04 rpi2 kernel: OTG VER PARAM: 0, OTG VER FLAG: 0 > Jan 01 00:00:04 rpi2 kernel: Dedicated Tx FIFOs mode > Jan 01 00:00:04 rpi2 kernel: WARN::dwc_otg_hcd_init:1047: FIQ DMA > bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024 > Jan 01 00:00:04 rpi2 kernel: FIQ FSM acceleration enabled for : > Non-periodic Split Transactions > Periodic Split Transactions > High-Speed Isochronous Endpoints > Jan 01 00:00:04 rpi2 kernel: dwc_otg: Microframe scheduler enabled > Jan 01 00:00:04 rpi2 kernel: WARN::hcd_init_fiq:412: FIQ on core 1 at > 0x80400a40 > Jan 01 00:00:04 rpi2 kernel: WARN::hcd_init_fiq:413: FIQ ASM at > 0x80400d9c length 36 > Jan 01 00:00:04 rpi2 kernel: WARN::hcd_init_fiq:438: MPHI regs_base at > 0xbb89a000 > Jan 01 00:00:04 rpi2 kernel: dwc_otg bcm2708_usb: DWC OTG Controller > Jan 01 00:00:04 rpi2 kernel: dwc_otg bcm2708_usb: new USB bus > registered, assigned bus number 1 > Jan 01 00:00:04 rpi2 kernel: dwc_otg bcm2708_usb: irq 32, io mem > 0x00000000 > Jan 01 00:00:04 rpi2 kernel: Init: Port Power? op_state=1 > Jan 01 00:00:04 rpi2 kernel: Init: Power Port (0) > Jan 01 00:00:04 rpi2 kernel: usb usb1: New USB device found, > idVendor=1d6b, idProduct=0002 > Jan 01 00:00:04 rpi2 kernel: usb usb1: New USB device strings: Mfr=3, > Product=2, SerialNumber=1 > Jan 01 00:00:04 rpi2 kernel: usb usb1: Product: DWC OTG Controller > Jan 01 00:00:04 rpi2 kernel: usb usb1: Manufacturer: Linux 4.1.11-v7+ > dwc_otg_hcd > Jan 01 00:00:04 rpi2 kernel: usb usb1: SerialNumber: bcm2708_usb > Jan 01 00:00:04 rpi2 kernel: hub 1-0:1.0: USB hub found > Jan 01 00:00:04 rpi2 kernel: hub 1-0:1.0: 1 port detected > Jan 01 00:00:04 rpi2 kernel: dwc_otg: FIQ enabled > Jan 01 00:00:04 rpi2 kernel: dwc_otg: NAK holdoff enabled > Jan 01 00:00:04 rpi2 kernel: dwc_otg: FIQ split-transaction FSM enabled > Jan 01 00:00:04 rpi2 kernel: Module dwc_common_port init > Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver > usb-storage > Jan 01 00:00:04 rpi2 kernel: mousedev: PS/2 mouse device common for > all mice > Jan 01 00:00:04 rpi2 kernel: bcm2835-cpufreq: min=600000 max=700000 > Jan 01 00:00:04 rpi2 kernel: sdhci: Secure Digital Host Controller > Interface driver > Jan 01 00:00:04 rpi2 kernel: sdhci: Copyright(c) Pierre Ossman > Jan 01 00:00:04 rpi2 kernel: mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0 > mmc_debug2:0 > Jan 01 00:00:04 rpi2 kernel: mmc-bcm2835 mmc-bcm2835.0: DMA channels > allocated > Jan 01 00:00:04 rpi2 kernel: sdhci-pltfm: SDHCI platform and OF driver > helper > Jan 01 00:00:04 rpi2 kernel: ledtrig-cpu: registered to indicate > activity on CPUs > Jan 01 00:00:04 rpi2 kernel: hidraw: raw HID events driver (C) Jiri > Kosina > Jan 01 00:00:04 rpi2 kernel: usbcore: registered new interface driver > usbhid > Jan 01 00:00:04 rpi2 kernel: usbhid: USB HID core driver > Jan 01 00:00:04 rpi2 kernel: Initializing XFRM netlink socket > Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 17 > Jan 01 00:00:04 rpi2 kernel: Indeed it is in host mode hprt0 = 00021501 > Jan 01 00:00:04 rpi2 kernel: Key type dns_resolver registered > Jan 01 00:00:04 rpi2 kernel: Registering SWP/SWPB emulation handler > Jan 01 00:00:04 rpi2 kernel: registered taskstats version 1 > Jan 01 00:00:04 rpi2 kernel: vc-sm: Videocore shared memory driver > Jan 01 00:00:04 rpi2 kernel: [vc_sm_connected_init]: start > Jan 01 00:00:04 rpi2 kernel: [vc_sm_connected_init]: end - returning 0 > Jan 01 00:00:04 rpi2 kernel: Waiting for root device /dev/mmcblk0p3... > Jan 01 00:00:04 rpi2 kernel: mmc0: host does not support reading > read-only switch, assuming write-enable > Jan 01 00:00:04 rpi2 kernel: mmc0: new high speed SDHC card at address > 0001 > Jan 01 00:00:04 rpi2 kernel: mmcblk0: mmc0:0001 00000 29.8 GiB > Jan 01 00:00:04 rpi2 kernel: mmcblk0: p1 p2 p3 > Jan 01 00:00:04 rpi2 kernel: usb 1-1: new high-speed USB device number > 2 using dwc_otg > Jan 01 00:00:04 rpi2 kernel: Indeed it is in host mode hprt0 = 00001101 > Jan 01 00:00:04 rpi2 kernel: EXT4-fs (mmcblk0p3): mounted filesystem > with ordered data mode. Opts: (null) > Jan 01 00:00:04 rpi2 kernel: VFS: Mounted root (ext4 filesystem) on > device 179:3. > Jan 01 00:00:04 rpi2 kernel: devtmpfs: mounted > Jan 01 00:00:04 rpi2 kernel: Freeing unused kernel memory: 416K > (80774000 - 807dc000) > Jan 01 00:00:04 rpi2 kernel: usb 1-1: New USB device found, > idVendor=0424, idProduct=9514 > Jan 01 00:00:04 rpi2 kernel: usb 1-1: New USB device strings: Mfr=0, > Product=0, SerialNumber=0 > Jan 01 00:00:04 rpi2 kernel: hub 1-1:1.0: USB hub found > Jan 01 00:00:04 rpi2 kernel: hub 1-1:1.0: 5 ports detected > Jan 01 00:00:04 rpi2 kernel: usb 1-1.1: new high-speed USB device > number 3 using dwc_otg > Jan 01 00:00:04 rpi2 kernel: NET: Registered protocol family 10 > Jan 01 00:00:04 rpi2 systemd[1]: Inserted module 'ipv6' > Jan 01 00:00:04 rpi2 kernel: usb 1-1.1: New USB device found, > idVendor=0424, idProduct=ec00 > Jan 01 00:00:04 rpi2 kernel: usb 1-1.1: New USB device strings: Mfr=0, > Product=0, SerialNumber=0 > Jan 01 00:00:04 rpi2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team > Jan 01 00:00:04 rpi2 systemd[1]: Inserted module 'ip_tables' > Jan 01 00:00:04 rpi2 kernel: smsc95xx v1.0.4 > Jan 01 00:00:04 rpi2 kernel: random: systemd urandom read with 64 bits > of entropy available > Jan 01 00:00:04 rpi2 systemd[1]: systemd 219 running in system mode. > (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP > +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS > +KMOD +IDN) > Jan 01 00:00:04 rpi2 systemd[1]: Detected architecture arm. > Jan 01 00:00:04 rpi2 systemd[1]: Set hostname to <rpi2>. > Jan 01 00:00:04 rpi2 kernel: smsc95xx 1-1.1:1.0 eth0: register > 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, > b8:27:eb:e1:49:65 > Jan 01 00:00:04 rpi2 kernel: uart-pl011 dev:f1: no DMA platform data > Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: new low-speed USB device > number 4 using dwc_otg > Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: New USB device found, > idVendor=045e, idProduct=0040 > Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: New USB device strings: Mfr=1, > Product=3, SerialNumber=0 > Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: Product: Microsoft 3-Button > Mouse with IntelliEye(TM) > Jan 01 00:00:04 rpi2 kernel: usb 1-1.3: Manufacturer: Microsoft > Jan 01 00:00:04 rpi2 kernel: input: Microsoft Microsoft 3-Button Mouse > with IntelliEye(TM) as > /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:045E:0040.0001/input/input0 > Jan 01 00:00:04 rpi2 kernel: hid-generic 0003:045E:0040.0001: > input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse > with IntelliEye(TM)] on usb-bcm2708_usb-1.3/input0 > Jan 01 00:00:04 rpi2 systemd[1]: Configuration file > /usr/lib/systemd/system/auditd.service is marked world-inaccessible. > This has no effect as configuration data is accessible via APIs > without restrictions. Proceeding anyway. > Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: new low-speed USB device > number 5 using dwc_otg > Jan 01 00:00:04 rpi2 systemd[1]: Configuration file > /usr/lib/systemd/system/ebtables.service is marked executable. Please > remove executable permission bits. Proceeding anyway. > Jan 01 00:00:04 rpi2 systemd[1]: Cannot add dependency job for unit > display-manager.service, ignoring: Unit display-manager.service failed > to load: No such file or directory. > Jan 01 00:00:04 rpi2 systemd[1]: Reached target Encrypted Volumes. > Jan 01 00:00:04 rpi2 systemd[1]: Starting Encrypted Volumes. > Jan 01 00:00:04 rpi2 systemd[1]: Started Forward Password Requests to > Wall Directory Watch. > Jan 01 00:00:04 rpi2 systemd[1]: Starting Forward Password Requests to > Wall Directory Watch. > Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: New USB device found, > idVendor=413c, idProduct=2105 > Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: New USB device strings: Mfr=1, > Product=2, SerialNumber=0 > Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: Product: Dell USB Keyboard > Jan 01 00:00:04 rpi2 kernel: usb 1-1.5: Manufacturer: Dell > Jan 01 00:00:04 rpi2 kernel: input: Dell Dell USB Keyboard as > /devices/platform/bcm2708_usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:413C:2105.0002/input/input1 > Jan 01 00:00:04 rpi2 systemd[1]: Set up automount Arbitrary Executable > File Formats File System Automount Point. > Jan 01 00:00:04 rpi2 systemd[1]: Starting Arbitrary Executable File > Formats File System Automount Point. > Jan 01 00:00:04 rpi2 kernel: hid-generic 0003:413C:2105.0002: > input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on > usb-bcm2708_usb-1.5/input0 > Jan 01 00:00:04 rpi2 systemd[1]: Reached target Remote File Systems. > Jan 01 00:00:04 rpi2 systemd[1]: Starting Remote File Systems. > Jan 01 00:00:04 rpi2 systemd[1]: Created slice Root Slice. > Jan 01 00:00:04 rpi2 systemd[1]: Starting Root Slice. > Jan 01 00:00:04 rpi2 systemd[1]: Listening on udev Control Socket. > Jan 01 00:00:04 rpi2 systemd[1]: Starting udev Control Socket. > Jan 01 00:00:04 rpi2 systemd[1]: Listening on Delayed Shutdown Socket. > Jan 01 00:00:04 rpi2 systemd[1]: Starting Delayed Shutdown Socket. > Jan 01 00:00:04 rpi2 systemd[1]: Created slice System Slice. > Jan 01 00:00:04 rpi2 systemd[1]: Starting System Slice. > Jan 01 00:00:04 rpi2 systemd[1]: Starting Collect Read-Ahead Data... > Jan 01 00:00:04 rpi2 systemd[1]: Started Replay Read-Ahead Data. > Jan 01 00:00:04 rpi2 systemd[1]: Created slice system-getty.slice. > Jan 01 00:00:04 rpi2 systemd[1]: Starting system-getty.slice. > Jan 01 00:00:04 rpi2 systemd[1]: Created slice > system-serial\x2dgetty.slice. > Jan 01 00:00:04 rpi2 systemd[1]: Starting system-serial\x2dgetty.slice. > Jan 01 00:00:04 rpi2 systemd[1]: Created slice User and Session Slice. > Jan 01 00:00:04 rpi2 systemd[1]: Starting User and Session Slice. > Jan 01 00:00:04 rpi2 systemd[1]: Reached target Slices. > Jan 01 00:00:04 rpi2 systemd[1]: Starting Slices. > Jan 01 00:00:04 rpi2 systemd[1]: Listening on /dev/initctl > Compatibility Named Pipe. > Jan 01 00:00:04 rpi2 systemd[1]: Starting /dev/initctl Compatibility > Named Pipe. > Jan 01 00:00:04 rpi2 systemd[1]: Listening on udev Kernel Socket. > Jan 01 00:00:04 rpi2 systemd[1]: Starting udev Kernel Socket. > Jan 01 00:00:04 rpi2 systemd[1]: Listening on Journal Socket. > Jan 01 00:00:04 rpi2 systemd[1]: Starting Journal Socket. > Jan 01 00:00:04 rpi2 systemd[1]: Mounting Debug File System... > Jan 01 00:00:04 rpi2 systemd[1]: Starting Create list of required > static device nodes for the current kernel... > Jan 01 00:00:04 rpi2 systemd[1]: Mounted Huge Pages File System. > Jan 01 00:00:04 rpi2 systemd[1]: Mounting POSIX Message Queue File > System... > Jan 01 00:00:04 rpi2 systemd[1]: Starting Journal Service... > Jan 01 00:00:04 rpi2 systemd[1]: Mounted POSIX Message Queue File System. > Jan 01 00:00:04 rpi2 systemd[1]: Mounted Debug File System. > Jan 01 00:00:04 rpi2 systemd[1]: Started Collect Read-Ahead Data. > Jan 01 00:00:04 rpi2 systemd[1]: Started Create list of required > static device nodes for the current kernel. > Jan 01 00:00:04 rpi2 systemd-journal[81]: Journal started > -- Subject: The journal has been started > -- Defined-By: systemd > -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel