Does qemu name the device and partitions differently? Perhaps it gives it a /dev/sdx name? Such as my pi uses /dev/mmcblk0, but the SD card in my x86_64 will show up as /dev/sdb On June 6, 2015 7:36:57 PM CDT, Mandar Joshi <emailmandar at gmail.com> wrote: >> The CentOS kernel and initramfs however is not able to find the root >> partition . It waits forever, gets stuck here >> http://pastebin.com/EUeBvcKD > >Eventually it dropped to the emergency shell with an warning saying >"Warning: /dev/mmcblk0p3 does not exist". Here are the boot messages >http://pastebin.com/VdRYNxAW > >The mmc_block kernel module is present. I am wondering why the kernel >and initramfs works on the Cubietruck3 but not in Qemu. Any >suggestions? > >Thanks >Mandar Joshi >_______________________________________________ >Arm-dev mailing list >Arm-dev at centos.org >http://lists.centos.org/mailman/listinfo/arm-dev -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20150606/1d3f8a7e/attachment-0006.html>