[Arm-dev] armv7hl - centos 7.1 rebuild status

Wed Jun 17 15:52:59 UTC 2015
cc35359 at gmail.com <cc35359 at gmail.com>

I had no dbus issues with the couple images I made. One image I made by simply yum distro syncing from fedora 19. The other image I did used yum to install to a USB stick, then copied that to an sdcard. The / worked on both ext4 and xfs for me as well, vfat is needed for boot though. I used the same kernel, and even copied the RPI script over and have ran it a few times on the last image I made. I had some issues with a WiFi module, but resolved that. No other problems.


On June 17, 2015 6:13:21 AM CDT, Johnny Hughes <johnny at centos.org> wrote:
>On 05/30/2015 06:26 AM, cc35359 at gmail.com wrote:
>> Its just a mostly bare install, less than a GB of space used to run.
>> There are still a few packages I can likely clean off, but there is
>> nothing there beyond what you have compiled already at least.
>> I can put the image file on Google drive (I could host the image on
>the
>> centos pi itself to allow a download, but I only have 1mbit upload
>> speed), that way you can at least mount it and see what is there, or
>i
>> can just dump the installed package list for you.
>> I will look into slimming it up even further, but is there a specific
>> goal in mind for the minimal rootfs: is it a size goal, or simply
>"all
>> thats needed to boot, take a keyboard as input, and access yum repos
>on
>> a network"?
>> Getting it working was step 1, at least its proof that your hard work
>is
>> paying off :)
>> Do we want anyone else to be able to download the image as well in
>order
>> to look for major faults yet, or wait until the next phase when you
>have
>> a rootfs built?
>
>
>OK, I have a pi2 image built from RBF:
>
>https://github.com/mndar/rbf
>
>However, the dbus service is not working.
>
>The way RBF is currently set up, it uses the raspi2 3.18.14-v7+ kernel
>on a vfat filesystem.
>
>Are you using the raspi2 kernel and does your dbus service work?
>
>Thanks,
>Johnny Hughes
>
>
>> 
>> 
>> 
>> 
>> 
>> On May 30, 2015 6:12:12 AM CDT, Fabian Arrotin <arrfab at centos.org>
>wrote:
>> 
>>     -----BEGIN PGP SIGNED MESSAGE-----
>>     Hash: SHA1
>> 
>>     On 29/05/15 20:03, cc35359 at gmail.com wrote:
>> 
>>         OK, I have a centos raspi2 all working. Not a single fedora
>>         package left. Do you have any pi2s?
>> 
>> 
>>     Oh cool  ...
>>     I have myself only two raspi1 and one odroid c1 .. but I'm sure
>some
>>     other folks on this list have raspi2 available ..
>>     Have you got the full list of needed packages for a working c7
>install ?
>> 
>>     - -- 
>> 
>>     Fabian Arrotin
>>     The CentOS Project | http://www.centos.org
>>     gpg key: 56BEC54E | twitter: @arrfab
>>     -----BEGIN PGP SIGNATURE-----
>>     Version: GnuPG v2.0.22 (GNU/Linux)
>> 
>>     iEYEARECAAYFAlVpmwwACgkQnVkHo1a+xU74WACeNam/49Of46CPWP7KK2BocbOs
>>     NuEAnRuWp4p8e0aPhcKA+5+reSNs4R7n
>>     =ez8r
>>     -----END PGP
>>     SIGNATURE-----
>>    
>------------------------------------------------------------------------
>> 
>>     Arm-dev mailing list
>>     Arm-dev at centos.org
>>     http://lists.centos.org/mailman/listinfo/arm-dev
>> 
>> 
>> 
>> _______________________________________________
>> Arm-dev mailing list
>> Arm-dev at centos.org
>> http://lists.centos.org/mailman/listinfo/arm-dev
>> 
>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Arm-dev mailing list
>Arm-dev at centos.org
>http://lists.centos.org/mailman/listinfo/arm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20150617/69e301fd/attachment-0006.html>