[Arm-dev] How to add Cubieboard2 - Re: Release for CentOS userland 7(1611) on armhfp

[Fabian Arrotin]

On 19/12/16 20:40, Robert Moskowitz wrote:
> After some struggle with old, frozen, memories (hey it is just about 0f
> here in Detroit!)...
> 
> I built an image of Fedora25:
> 
> https://arm.fedoraproject.org/
> 
> After going through the install and booting up on a Cubieboard2 (could
> have been any board, see next step),
> 
> I grabbed the .bin from:
> 
> /usr/share/uboot/Cubieboard2/
> 
> And used that to overlay the CubieTruck img's uboot.
> 
> dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8; sync  <-
> replace sdb with your device.
> 
> Worked like a charm.  I would suspect this will work for all of the A20
> boards.
> 
> Is someone interested in my emailing them the Cubieboard2 uboot bin to
> put up somewhere?  Or perhaps the distro maintainer could put a
> directory off where the images are for specific uboots to be added as
> people get a new board working by simply replacing the uboot bin.
> 
> Bob


Do you mean the rpm containing already all this ?
http://mirror.centos.org/altarch/7.3.1611/extras/armhfp/Packages/uboot-images-armv7-2016.09.01-3.el7.noarch.rpm



-- 
Fabian Arrotin
The CentOS Project | http://www.centos.org
gpg key: 56BEC54E | twitter: @arrfab

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20161219/38d32ec4/attachment.sig>