[Arm-dev] How to add Cubieboard2 - Re: Release for CentOS userland 7(1611) on armhfp

Mon Dec 19 20:52:38 UTC 2016
Robert Moskowitz <rgm at htt-consult.com>


On 12/19/2016 03:42 PM, Fabian Arrotin wrote:
> On 19/12/16 20:40, Robert Moskowitz wrote:
>> After some struggle with old, frozen, memories (hey it is just about 0f
>> here in Detroit!)...
>>
>> I built an image of Fedora25:
>>
>> https://arm.fedoraproject.org/
>>
>> After going through the install and booting up on a Cubieboard2 (could
>> have been any board, see next step),
>>
>> I grabbed the .bin from:
>>
>> /usr/share/uboot/Cubieboard2/
>>
>> And used that to overlay the CubieTruck img's uboot.
>>
>> dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8; sync  <-
>> replace sdb with your device.
>>
>> Worked like a charm.  I would suspect this will work for all of the A20
>> boards.
>>
>> Is someone interested in my emailing them the Cubieboard2 uboot bin to
>> put up somewhere?  Or perhaps the distro maintainer could put a
>> directory off where the images are for specific uboots to be added as
>> people get a new board working by simply replacing the uboot bin.
>>
>> Bob
>
> Do you mean the rpm containing already all this ?
> http://mirror.centos.org/altarch/7.3.1611/extras/armhfp/Packages/uboot-images-armv7-2016.09.01-3.el7.noarch.rpm

Most likely.  ARGH!!!

Can you please add this to the Wiki?

And also perhaps add a working boards list, adding the C2?

Bob