[Arm-dev] Hummingboard

Mon Feb 1 20:09:55 UTC 2016
johan.vermeulen7 at telenet.be <johan.vermeulen7 at telenet.be>


----- Oorspronkelijk bericht -----

Van: "johan vermeulen7" <johan.vermeulen7 at telenet.be> 
Aan: "Conversations around CentOS on ARM hardware" <arm-dev at centos.org> 
Verzonden: Maandag 1 februari 2016 20:57:27 
Onderwerp: Re: [Arm-dev] Hummingboard 



----- Oorspronkelijk bericht -----

Van: "Robert Moskowitz" <rgm at htt-consult.com> 
Aan: "Conversations around CentOS on ARM hardware" <arm-dev at centos.org> 
Verzonden: Maandag 1 februari 2016 12:17:33 
Onderwerp: Re: [Arm-dev] Hummingboard 

This reads very much like Freescale's wandboards. Look them up and compare. If so, use the Centos image for the Cubietruck, then dd the wandboard uboot and give that a try. 

Off hand, without doing some research, I do not know of any other Freescale based boards currently supportable with what we have inherited for the Fedora-arm project. 

On 02/01/2016 04:06 AM, johan.vermeulen7 at telenet.be wrote: 



Hello All, 

this is my first post on this mailing list. 

In our organization we have just over 100 thinclients. One day I thought: wouldn't it be great if we could replace them with 
Rasberry Pi's? 

After experimenting with that I thought: this arm is great, cheap, silent and shiny new. 
So I was thinking: I need something stronger than the Rasberry Pi. Maybe I can replace some light servers as well. 

So I bought a Hummingboard Edge from Solidrun and had it shipped from Israel. The strongest model I could find. 
Here are the specs: 
https://www.solid-run.com/freescale-imx6-family/hummingboard/hummingboard-specifications/ 

Can anybody help me get Centos7 running on that? 
So far I tried the CentOS-Userland-7-armv7hl-Minimal-1511-RaspberryPi2.img.xz and the 
CentOS-7-aarch64.img.xz 
I haven't tested in any detail so far but both showed nothing on the screen. 

My ultimate goal would be to use Hummingboards with Centos7 on them as Ovirt or Kubernetes nodes. 

Thanks for any advise. 

Greetings, Johan 

Hello Fabian and Robert, 

thanks a million for the replies. I will follow that advise. 
If in the end it doesn't work, If I understand the documentation correctly, the cpu is swapable. 

I will also mail Solidrun and ask for some help. 

greetings, Johan 


Hello All, 

when logging in on the Solidrun forum, I found reference to to this github page: 

https://github.com/jmontleon/fedora-cubox-i_hb/blob/master/README.md 

Greetings, Johan 





_______________________________________________
Arm-dev mailing list Arm-dev at centos.org https://lists.centos.org/mailman/listinfo/arm-dev 




_______________________________________________ 
Arm-dev mailing list 
Arm-dev at centos.org 
https://lists.centos.org/mailman/listinfo/arm-dev 


_______________________________________________ 
Arm-dev mailing list 
Arm-dev at centos.org 
https://lists.centos.org/mailman/listinfo/arm-dev 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20160201/f1d10360/attachment-0006.html>