[Arm-dev] Implementing on beaglebone black.
Robert Moskowitz
rgm at htt-consult.com
Sun Jan 10 02:11:58 UTC 2016
I might suggest first getting Fedora23 minimal running on your BBB. Make
sure what is know to work is working for you.
Go to:
https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation
For instructions.
From there we may be able to figure out what is mismatched here with
C7-arm and BBB.
On 01/08/2016 09:38 PM, Dave Germiquet wrote:
> Hi Robert,
>
> Using that method, it got hung on the loading kernel:
>
> -Boot 2015.10 (Nov 26 2015 - 14:45:29 -0500)
>
> Watchdog enabled
> I2C: ready
> DRAM: 512 MiB
> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
> *** Warning - bad CRC, using default environment
>
> Net: <ethaddr> not set. Validating first E-fuse MAC
> cpsw, usb_ether
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> Found /extlinux/extlinux.conf
> Retrieving file: /extlinux/extlinux.conf
> 333 bytes read in 35 ms (8.8 KiB/s)
> Ignoring unknown command: ui
> Ignoring malformed menu command: autoboot
> Ignoring unknown command: totaltimeout
> centos Options
> 1: centos
> Enter choice: 1
> 1: centos
> Retrieving file: /initramfs-4.2.3-200.el7.armv7hl.img
> 34976246 bytes read in 2043 ms (16.3 MiB/s)
> Retrieving file: /vmlinuz-4.2.3-200.el7.armv7hl
> 5866104 bytes read in 375 ms (14.9 MiB/s)
> append: enforcing=0 root=UUID=770af0f9-c7d9-4ae9-b024-1ba3c78d7550
> Retrieving file: /dtb-4.2.3-200.el7.armv7hl/am335x-boneblack.dtb
> 31457 bytes read in 245 ms (125 KiB/s)
> Kernel image @ 0x82000000 [ 0x000000 - 0x598278 ]
> ## Flattened Device Tree blob at 88000000
> Booting using the fdt blob at 0x88000000
> Loading Ramdisk to 8dea4000, end 8ffff1f6 ... OK
> Loading Device Tree to 8de99000, end 8dea3ae0 ... OK
>
> Starting kernel ...
>
>
> Steps took:
>
> Flashed Cubie Image
> Flushed MLO
> Flashed Uboot (with dd)
> ------------------------------------------------------------------------
> To: arm-dev at centos.org
> From: rgm at htt-consult.com
> Date: Mon, 4 Jan 2016 10:22:42 -0500
> Subject: Re: [Arm-dev] Implementing on beaglebone black.
>
>
>
> On 12/28/2015 08:28 PM, Dave Germiquet wrote:
>
> Hello,
>
> I am looking into putting Centos on my Beaglebone Black, and I
> came across your rootfs factory. I'm wondering how it works and
> what is the high->low level of implementing.
>
> Do I need an existing arm binary system?
>
> Currently Beaglebone black comes with debian, and my desktop is
> debian, how would I use your scripts, to make the initial image?
>
> The end goal is to have a centos system with Selinux enabled.
>
>
> The Fedora23 installation instructions have been updated now at:
>
> https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation#For_the_BeagleBone_.28_Black_.26_White_.29
>
> Use that as guidance with the files I provided and let us know if you
> have C7 on your BBB.
>
> The more we can cut-n-paste from Fedora, the less stumbling around we
> will do here. (IMNSHO)
>
>
>
> _______________________________________________ Arm-dev mailing list
> Arm-dev at centos.org https://lists.centos.org/mailman/listinfo/arm-dev
>
>
> _______________________________________________
> Arm-dev mailing list
> Arm-dev at centos.org
> https://lists.centos.org/mailman/listinfo/arm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20160109/fd4a46bb/attachment.html>
More information about the Arm-dev
mailing list