Hi folks, X-Gene kernel does not support ipmitools, which relies on OpenIPMI driver (using /dev/ipmi). Instead, communications to the BMC is via SSIF over /dev/i2c. You can either use ipmitools with the BMC LAN interface directly (out of band), or freeipmi (inband). I don’t have the information handy at this time – will follow up tomorrow. -Phong *From:* arm-dev-bounces at centos.org [mailto:arm-dev-bounces at centos.org] *On Behalf Of *Michael Howard *Sent:* Monday, March 14, 2016 6:48 PM *To:* arm-dev at centos.org *Subject:* Re: [Arm-dev] Gigabyte MP30-AR0 On 13/03/2016 16:10, Gordan Bobic wrote: On 13/03/16 15:57, Michael Howard wrote: On 13/03/2016 14:58, Gordan Bobic wrote: On 13/03/16 14:20, Michael Howard wrote: On 13/03/2016 07:34, Gordan Bobic wrote: Does anyone have any input on what (if any) lm_sensors drivers can be used? Probing tends to result in crashing the machine. Is there something other than ipmi available? You'll probably find it's the default kernel causing the crash, it'll likely work with your new kernel, it does here. No, still causes a crash: Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Message from syslogd at orcone at Mar 13 14:34:18 ... kernel:Internal error: : 96000010 [#1] SMP Some systems (mainly servers) implement IPMI, a set of common interfaces through which system health data may be retrieved, amongst other things. We first try to get the information from SMBIOS. If we don't find it there, we have to read from arbitrary I/O ports to probe for such interfaces. This is normally safe. Do you want to scan for IPMI interfaces? (YES/no): # DMI data unavailable, please consider installing dmidecode 2.7 # or later for better results. Probing for `IPMI BMC KCS' at 0xca0... Message from syslogd at orcone at Mar 13 14:51:42 ... kernel:Internal error: : 96000010 [#1] SMP So it seems the sensors aren't there, and proving the various I/O ranges causes a crash. Still it would be nice to get "ipmitool sensor" working locally. # ipmitool sensor Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Get Device ID command failed Unable to open SDR for reading Is there a driver that I missed? This may be a compatibility issue with ipmitools package, the protocol is clearly compatible though. I guess you can't load the ipmi_si module? I created /dev/ipmi0 manually but it made no difference to the error displayed. # modprobe ipmi_si modprobe: ERROR: could not insert 'ipmi_si': No such device So I'm wondering if a different driver is needed. Or a patch for this one. Having gone into the scant manual and the Ubuntu image (along with some Googling) it seems the board requires an SSIF driver (ipmi_smb?) which is not in mainline since 2.6 days. -- Mike Howard -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20160314/222a5f8a/attachment-0006.html>