On 18/03/2016 03:18, Chuong Tran wrote:
> Hi Gordan,
>
> If you want to retain the output on serial console, please add kernel
> command "console=ttyS0,115200" at the grub config.
> If you want to see the kernel boot at both serial and vga, add
> "console=tty0" (for vga) along side with "console=ttyS0,115200". The
> output from VGA will come after kernel configure the video card.
>
>
I use this setting ("console=ttyS0,115200 console=tty0") but output is
not retained on the serial console. Maybe this is kernel specific.
--
Mike Howard