[Arm-dev] [PATCH] add QDF2432 support

Christopher Covington cov at codeaurora.org
Mon May 9 13:09:18 UTC 2016


Backport UART and GIC related patches, enabling the CentOS 7.2
AltArch kernel to run on the Qualcomm Technologies QDF2432 server
development platform.

Signed-off-by: Christopher Covington <cov at codeaurora.org>
---
 ...mba-pl011-add-register-accessor-functions.patch | 718 +++++++++++++++++++++
 ...011-convert-accessor-functions-to-take-ua.patch | 709 ++++++++++++++++++++
 ...011-add-support-for-32-bit-register-acces.patch |  79 +++
 ...011-use-iotype-instead-of-access_32b-to-t.patch | 119 ++++
 ...a-pl011-Use-32-bit-accesses-for-SBSA-UART.patch |  29 +
 ...4006-irqchip-Fully-support-ACPI-GICv3-ITS.patch |  49 ++
 ...-add-support-for-extended-IRQ-to-PCI-link.patch | 113 ++++
 ...-v3-ACPI-Add-redistributor-support-via-GI.patch |  68 ++
 SPECS/kernel-aarch64.spec                          |  25 +-
 9 files changed, 1908 insertions(+), 1 deletion(-)
 create mode 100644 SOURCES/4001-tty-amba-pl011-add-register-accessor-functions.patch
 create mode 100644 SOURCES/4002-tty-amba-pl011-convert-accessor-functions-to-take-ua.patch
 create mode 100644 SOURCES/4003-tty-amba-pl011-add-support-for-32-bit-register-acces.patch
 create mode 100644 SOURCES/4004-tty-amba-pl011-use-iotype-instead-of-access_32b-to-t.patch
 create mode 100644 SOURCES/4005-tty-amba-pl011-Use-32-bit-accesses-for-SBSA-UART.patch
 create mode 100644 SOURCES/4006-irqchip-Fully-support-ACPI-GICv3-ITS.patch
 create mode 100644 SOURCES/4007-acpi-add-support-for-extended-IRQ-to-PCI-link.patch
 create mode 100644 SOURCES/4008-irqchip-gic-v3-ACPI-Add-redistributor-support-via-GI.patch

diff --git a/SOURCES/4001-tty-amba-pl011-add-register-accessor-functions.patch b/SOURCES/4001-tty-amba-pl011-add-register-accessor-functions.patch
new file mode 100644
index 0000000..6fb4d0e
--- /dev/null
+++ b/SOURCES/4001-tty-amba-pl011-add-register-accessor-functions.patch
@@ -0,0 +1,718 @@
+From: Russell King <rmk+kernel at arm.linux.org.uk>
+Date: Tue, 3 Nov 2015 14:50:58 +0000
+Subject: tty: amba-pl011: add register accessor functions
+
+Add register accessor functions to amba-pl011.  Much of this
+transformation was done using the sed expression below, with any
+left-overs fixed up manually afterwards, and code formatted to remain
+within coding style.
+
+s/readw(\(uap->port.membase\|regs\|port->membase\) +/pl011_read(\1,/g
+s/writew(\(.*\) +/pl011_write(\1,/g
+
+Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
+Reviewed-by: Peter Hurley <peter at hurleysoftware.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
+
+Git-commit: 7583633921d54f33e96b65569a0c980ae1d05dba
+Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+---
+ drivers/tty/serial/amba-pl011.c | 210 +++++++++++++++++++++-------------------
+ 1 file changed, 112 insertions(+), 98 deletions(-)
+
+diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
+index fd27e98..b75f750 100644
+--- a/drivers/tty/serial/amba-pl011.c
++++ b/drivers/tty/serial/amba-pl011.c
+@@ -184,6 +184,16 @@ struct uart_amba_port {
+ #endif
+ };
+ 
++static unsigned int pl011_read(void __iomem *base, unsigned int reg)
++{
++	return readw(base + reg);
++}
++
++static void pl011_write(unsigned int val, void __iomem *base, unsigned int reg)
++{
++	writew(val, base + reg);
++}
++
+ /*
+  * Reads up to 256 characters from the FIFO or until it's empty and
+  * inserts them into the TTY layer. Returns the number of characters
+@@ -196,12 +206,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
+ 	int fifotaken = 0;
+ 
+ 	while (max_count--) {
+-		status = readw(uap->port.membase + UART01x_FR);
++		status = pl011_read(uap->port.membase, UART01x_FR);
+ 		if (status & UART01x_FR_RXFE)
+ 			break;
+ 
+ 		/* Take chars from the FIFO and update status */
+-		ch = readw(uap->port.membase + UART01x_DR) |
++		ch = pl011_read(uap->port.membase, UART01x_DR) |
+ 			UART_DUMMY_DR_RX;
+ 		flag = TTY_NORMAL;
+ 		uap->port.icount.rx++;
+@@ -438,7 +448,7 @@ static void pl011_dma_tx_callback(void *data)
+ 
+ 	dmacr = uap->dmacr;
+ 	uap->dmacr = dmacr & ~UART011_TXDMAE;
+-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 
+ 	/*
+ 	 * If TX DMA was disabled, it means that we've stopped the DMA for
+@@ -552,7 +562,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
+ 	dma_dev->device_issue_pending(chan);
+ 
+ 	uap->dmacr |= UART011_TXDMAE;
+-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 	uap->dmatx.queued = true;
+ 
+ 	/*
+@@ -588,9 +598,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
+ 	 */
+ 	if (uap->dmatx.queued) {
+ 		uap->dmacr |= UART011_TXDMAE;
+-		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++		pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 		uap->im &= ~UART011_TXIM;
+-		writew(uap->im, uap->port.membase + UART011_IMSC);
++		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 		return true;
+ 	}
+ 
+@@ -600,7 +610,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
+ 	 */
+ 	if (pl011_dma_tx_refill(uap) > 0) {
+ 		uap->im &= ~UART011_TXIM;
+-		writew(uap->im, uap->port.membase + UART011_IMSC);
++		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 		return true;
+ 	}
+ 	return false;
+@@ -614,7 +624,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
+ {
+ 	if (uap->dmatx.queued) {
+ 		uap->dmacr &= ~UART011_TXDMAE;
+-		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++		pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 	}
+ }
+ 
+@@ -640,14 +650,14 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+ 		if (!uap->dmatx.queued) {
+ 			if (pl011_dma_tx_refill(uap) > 0) {
+ 				uap->im &= ~UART011_TXIM;
+-				writew(uap->im, uap->port.membase +
+-				       UART011_IMSC);
++				pl011_write(uap->im, uap->port.membase,
++					    UART011_IMSC);
+ 			} else
+ 				ret = false;
+ 		} else if (!(uap->dmacr & UART011_TXDMAE)) {
+ 			uap->dmacr |= UART011_TXDMAE;
+-			writew(uap->dmacr,
+-				       uap->port.membase + UART011_DMACR);
++			pl011_write(uap->dmacr, uap->port.membase,
++				    UART011_DMACR);
+ 		}
+ 		return ret;
+ 	}
+@@ -658,9 +668,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+ 	 */
+ 	dmacr = uap->dmacr;
+ 	uap->dmacr &= ~UART011_TXDMAE;
+-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 
+-	if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) {
++	if (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF) {
+ 		/*
+ 		 * No space in the FIFO, so enable the transmit interrupt
+ 		 * so we know when there is space.  Note that once we've
+@@ -669,13 +679,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+ 		return false;
+ 	}
+ 
+-	writew(uap->port.x_char, uap->port.membase + UART01x_DR);
++	pl011_write(uap->port.x_char, uap->port.membase, UART01x_DR);
+ 	uap->port.icount.tx++;
+ 	uap->port.x_char = 0;
+ 
+ 	/* Success - restore the DMA state */
+ 	uap->dmacr = dmacr;
+-	writew(dmacr, uap->port.membase + UART011_DMACR);
++	pl011_write(dmacr, uap->port.membase, UART011_DMACR);
+ 
+ 	return true;
+ }
+@@ -703,7 +713,7 @@ __acquires(&uap->port.lock)
+ 			     DMA_TO_DEVICE);
+ 		uap->dmatx.queued = false;
+ 		uap->dmacr &= ~UART011_TXDMAE;
+-		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++		pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 	}
+ }
+ 
+@@ -743,11 +753,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
+ 	dma_async_issue_pending(rxchan);
+ 
+ 	uap->dmacr |= UART011_RXDMAE;
+-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 	uap->dmarx.running = true;
+ 
+ 	uap->im &= ~UART011_RXIM;
+-	writew(uap->im, uap->port.membase + UART011_IMSC);
++	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 
+ 	return 0;
+ }
+@@ -805,8 +815,8 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
+ 	 */
+ 	if (dma_count == pending && readfifo) {
+ 		/* Clear any error flags */
+-		writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
+-		       uap->port.membase + UART011_ICR);
++		pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
++			    UART011_FEIS, uap->port.membase, UART011_ICR);
+ 
+ 		/*
+ 		 * If we read all the DMA'd characters, and we had an
+@@ -854,7 +864,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
+ 
+ 	/* Disable RX DMA - incoming data will wait in the FIFO */
+ 	uap->dmacr &= ~UART011_RXDMAE;
+-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 	uap->dmarx.running = false;
+ 
+ 	pending = sgbuf->sg.length - state.residue;
+@@ -874,7 +884,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
+ 		dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
+ 			"fall back to interrupt mode\n");
+ 		uap->im |= UART011_RXIM;
+-		writew(uap->im, uap->port.membase + UART011_IMSC);
++		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 	}
+ }
+ 
+@@ -922,7 +932,7 @@ static void pl011_dma_rx_callback(void *data)
+ 		dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
+ 			"fall back to interrupt mode\n");
+ 		uap->im |= UART011_RXIM;
+-		writew(uap->im, uap->port.membase + UART011_IMSC);
++		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 	}
+ }
+ 
+@@ -935,7 +945,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
+ {
+ 	/* FIXME.  Just disable the DMA enable */
+ 	uap->dmacr &= ~UART011_RXDMAE;
+-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ }
+ 
+ /*
+@@ -979,7 +989,7 @@ static void pl011_dma_rx_poll(unsigned long args)
+ 		spin_lock_irqsave(&uap->port.lock, flags);
+ 		pl011_dma_rx_stop(uap);
+ 		uap->im |= UART011_RXIM;
+-		writew(uap->im, uap->port.membase + UART011_IMSC);
++		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 		spin_unlock_irqrestore(&uap->port.lock, flags);
+ 
+ 		uap->dmarx.running = false;
+@@ -1041,7 +1051,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
+ skip_rx:
+ 	/* Turn on DMA error (RX/TX will be enabled on demand) */
+ 	uap->dmacr |= UART011_DMAONERR;
+-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 
+ 	/*
+ 	 * ST Micro variants has some specific dma burst threshold
+@@ -1049,8 +1059,8 @@ skip_rx:
+ 	 * be issued above/below 16 bytes.
+ 	 */
+ 	if (uap->vendor->dma_threshold)
+-		writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
+-			       uap->port.membase + ST_UART011_DMAWM);
++		pl011_write(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
++			    uap->port.membase, ST_UART011_DMAWM);
+ 
+ 	if (uap->using_rx_dma) {
+ 		if (pl011_dma_rx_trigger_dma(uap))
+@@ -1075,12 +1085,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
+ 		return;
+ 
+ 	/* Disable RX and TX DMA */
+-	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
++	while (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_BUSY)
+ 		barrier();
+ 
+ 	spin_lock_irq(&uap->port.lock);
+ 	uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
+-	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
++	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
+ 	spin_unlock_irq(&uap->port.lock);
+ 
+ 	if (uap->using_tx_dma) {
+@@ -1181,7 +1191,7 @@ static void pl011_stop_tx(struct uart_port *port)
+ 	    container_of(port, struct uart_amba_port, port);
+ 
+ 	uap->im &= ~UART011_TXIM;
+-	writew(uap->im, uap->port.membase + UART011_IMSC);
++	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 	pl011_dma_tx_stop(uap);
+ }
+ 
+@@ -1191,7 +1201,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
+ static void pl011_start_tx_pio(struct uart_amba_port *uap)
+ {
+ 	uap->im |= UART011_TXIM;
+-	writew(uap->im, uap->port.membase + UART011_IMSC);
++	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 	pl011_tx_chars(uap, false);
+ }
+ 
+@@ -1211,7 +1221,7 @@ static void pl011_stop_rx(struct uart_port *port)
+ 
+ 	uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
+ 		     UART011_PEIM|UART011_BEIM|UART011_OEIM);
+-	writew(uap->im, uap->port.membase + UART011_IMSC);
++	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 
+ 	pl011_dma_rx_stop(uap);
+ }
+@@ -1222,7 +1232,7 @@ static void pl011_enable_ms(struct uart_port *port)
+ 	    container_of(port, struct uart_amba_port, port);
+ 
+ 	uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
+-	writew(uap->im, uap->port.membase + UART011_IMSC);
++	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ }
+ 
+ static void pl011_rx_chars(struct uart_amba_port *uap)
+@@ -1242,7 +1252,7 @@ __acquires(&uap->port.lock)
+ 			dev_dbg(uap->port.dev, "could not trigger RX DMA job "
+ 				"fall back to interrupt mode again\n");
+ 			uap->im |= UART011_RXIM;
+-			writew(uap->im, uap->port.membase + UART011_IMSC);
++			pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 		} else {
+ #ifdef CONFIG_DMA_ENGINE
+ 			/* Start Rx DMA poll */
+@@ -1263,10 +1273,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
+ 			  bool from_irq)
+ {
+ 	if (unlikely(!from_irq) &&
+-	    readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
++	    pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF)
+ 		return false; /* unable to transmit character */
+ 
+-	writew(c, uap->port.membase + UART01x_DR);
++	pl011_write(c, uap->port.membase, UART01x_DR);
+ 	uap->port.icount.tx++;
+ 
+ 	return true;
+@@ -1313,7 +1323,8 @@ static void pl011_modem_status(struct uart_amba_port *uap)
+ {
+ 	unsigned int status, delta;
+ 
+-	status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++	status = pl011_read(uap->port.membase, UART01x_FR);
++	status &= UART01x_FR_MODEM_ANY;
+ 
+ 	delta = status ^ uap->old_status;
+ 	uap->old_status = status;
+@@ -1341,15 +1352,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
+ 		return;
+ 
+ 	/* workaround to make sure that all bits are unlocked.. */
+-	writew(0x00, uap->port.membase + UART011_ICR);
++	pl011_write(0x00, uap->port.membase, UART011_ICR);
+ 
+ 	/*
+ 	 * WA: introduce 26ns(1 uart clk) delay before W1C;
+ 	 * single apb access will incur 2 pclk(133.12Mhz) delay,
+ 	 * so add 2 dummy reads
+ 	 */
+-	dummy_read = readw(uap->port.membase + UART011_ICR);
+-	dummy_read = readw(uap->port.membase + UART011_ICR);
++	dummy_read = pl011_read(uap->port.membase, UART011_ICR);
++	dummy_read = pl011_read(uap->port.membase, UART011_ICR);
+ }
+ 
+ static irqreturn_t pl011_int(int irq, void *dev_id)
+@@ -1361,15 +1372,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
+ 	int handled = 0;
+ 
+ 	spin_lock_irqsave(&uap->port.lock, flags);
+-	imsc = readw(uap->port.membase + UART011_IMSC);
+-	status = readw(uap->port.membase + UART011_RIS) & imsc;
++	imsc = pl011_read(uap->port.membase, UART011_IMSC);
++	status = pl011_read(uap->port.membase, UART011_RIS) & imsc;
+ 	if (status) {
+ 		do {
+ 			check_apply_cts_event_workaround(uap);
+ 
+-			writew(status & ~(UART011_TXIS|UART011_RTIS|
+-					  UART011_RXIS),
+-			       uap->port.membase + UART011_ICR);
++			pl011_write(status & ~(UART011_TXIS|UART011_RTIS|
++					       UART011_RXIS),
++				    uap->port.membase, UART011_ICR);
+ 
+ 			if (status & (UART011_RTIS|UART011_RXIS)) {
+ 				if (pl011_dma_rx_running(uap))
+@@ -1386,7 +1397,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
+ 			if (pass_counter-- == 0)
+ 				break;
+ 
+-			status = readw(uap->port.membase + UART011_RIS) & imsc;
++			status = pl011_read(uap->port.membase, UART011_RIS) & imsc;
+ 		} while (status != 0);
+ 		handled = 1;
+ 	}
+@@ -1400,7 +1411,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
+ {
+ 	struct uart_amba_port *uap =
+ 	    container_of(port, struct uart_amba_port, port);
+-	unsigned int status = readw(uap->port.membase + UART01x_FR);
++	unsigned int status = pl011_read(uap->port.membase, UART01x_FR);
+ 	return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+ }
+ 
+@@ -1409,7 +1420,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
+ 	struct uart_amba_port *uap =
+ 	    container_of(port, struct uart_amba_port, port);
+ 	unsigned int result = 0;
+-	unsigned int status = readw(uap->port.membase + UART01x_FR);
++	unsigned int status = pl011_read(uap->port.membase, UART01x_FR);
+ 
+ #define TIOCMBIT(uartbit, tiocmbit)	\
+ 	if (status & uartbit)		\
+@@ -1429,7 +1440,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
+ 	    container_of(port, struct uart_amba_port, port);
+ 	unsigned int cr;
+ 
+-	cr = readw(uap->port.membase + UART011_CR);
++	cr = pl011_read(uap->port.membase, UART011_CR);
+ 
+ #define	TIOCMBIT(tiocmbit, uartbit)		\
+ 	if (mctrl & tiocmbit)		\
+@@ -1449,7 +1460,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
+ 	}
+ #undef TIOCMBIT
+ 
+-	writew(cr, uap->port.membase + UART011_CR);
++	pl011_write(cr, uap->port.membase, UART011_CR);
+ }
+ 
+ static void pl011_break_ctl(struct uart_port *port, int break_state)
+@@ -1460,12 +1471,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
+ 	unsigned int lcr_h;
+ 
+ 	spin_lock_irqsave(&uap->port.lock, flags);
+-	lcr_h = readw(uap->port.membase + uap->lcrh_tx);
++	lcr_h = pl011_read(uap->port.membase, uap->lcrh_tx);
+ 	if (break_state == -1)
+ 		lcr_h |= UART01x_LCRH_BRK;
+ 	else
+ 		lcr_h &= ~UART01x_LCRH_BRK;
+-	writew(lcr_h, uap->port.membase + uap->lcrh_tx);
++	pl011_write(lcr_h, uap->port.membase, uap->lcrh_tx);
+ 	spin_unlock_irqrestore(&uap->port.lock, flags);
+ }
+ 
+@@ -1477,7 +1488,7 @@ static void pl011_quiesce_irqs(struct uart_port *port)
+ 	    container_of(port, struct uart_amba_port, port);
+ 	unsigned char __iomem *regs = uap->port.membase;
+ 
+-	writew(readw(regs + UART011_MIS), regs + UART011_ICR);
++	pl011_write(pl011_read(regs, UART011_MIS), regs, UART011_ICR);
+ 	/*
+ 	 * There is no way to clear TXIM as this is "ready to transmit IRQ", so
+ 	 * we simply mask it. start_tx() will unmask it.
+@@ -1491,7 +1502,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
+ 	 * (including tx queue), so we're also fine with start_tx()'s caller
+ 	 * side.
+ 	 */
+-	writew(readw(regs + UART011_IMSC) & ~UART011_TXIM, regs + UART011_IMSC);
++	pl011_write(pl011_read(regs, UART011_IMSC) & ~UART011_TXIM,
++		    regs, UART011_IMSC);
+ }
+ 
+ static int pl011_get_poll_char(struct uart_port *port)
+@@ -1506,11 +1518,11 @@ static int pl011_get_poll_char(struct uart_port *port)
+ 	 */
+ 	pl011_quiesce_irqs(port);
+ 
+-	status = readw(uap->port.membase + UART01x_FR);
++	status = pl011_read(uap->port.membase, UART01x_FR);
+ 	if (status & UART01x_FR_RXFE)
+ 		return NO_POLL_CHAR;
+ 
+-	return readw(uap->port.membase + UART01x_DR);
++	return pl011_read(uap->port.membase, UART01x_DR);
+ }
+ 
+ static void pl011_put_poll_char(struct uart_port *port,
+@@ -1519,10 +1531,10 @@ static void pl011_put_poll_char(struct uart_port *port,
+ 	struct uart_amba_port *uap =
+ 	    container_of(port, struct uart_amba_port, port);
+ 
+-	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
++	while (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF)
+ 		barrier();
+ 
+-	writew(ch, uap->port.membase + UART01x_DR);
++	pl011_write(ch, uap->port.membase, UART01x_DR);
+ }
+ 
+ #endif /* CONFIG_CONSOLE_POLL */
+@@ -1546,15 +1558,17 @@ static int pl011_hwinit(struct uart_port *port)
+ 	uap->port.uartclk = clk_get_rate(uap->clk);
+ 
+ 	/* Clear pending error and receive interrupts */
+-	writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
+-	       UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR);
++	pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
++		    UART011_FEIS | UART011_RTIS | UART011_RXIS,
++		    uap->port.membase, UART011_ICR);
+ 
+ 	/*
+ 	 * Save interrupts enable mask, and enable RX interrupts in case if
+ 	 * the interrupt is used for NMI entry.
+ 	 */
+-	uap->im = readw(uap->port.membase + UART011_IMSC);
+-	writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC);
++	uap->im = pl011_read(uap->port.membase, UART011_IMSC);
++	pl011_write(UART011_RTIM | UART011_RXIM, uap->port.membase,
++		    UART011_IMSC);
+ 
+ 	if (dev_get_platdata(uap->port.dev)) {
+ 		struct amba_pl011_data *plat;
+@@ -1568,7 +1582,7 @@ static int pl011_hwinit(struct uart_port *port)
+ 
+ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
+ {
+-	writew(lcr_h, uap->port.membase + uap->lcrh_rx);
++	pl011_write(lcr_h, uap->port.membase, uap->lcrh_rx);
+ 	if (uap->lcrh_rx != uap->lcrh_tx) {
+ 		int i;
+ 		/*
+@@ -1576,14 +1590,14 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
+ 		 * to get this delay write read only register 10 times
+ 		 */
+ 		for (i = 0; i < 10; ++i)
+-			writew(0xff, uap->port.membase + UART011_MIS);
+-		writew(lcr_h, uap->port.membase + uap->lcrh_tx);
++			pl011_write(0xff, uap->port.membase, UART011_MIS);
++		pl011_write(lcr_h, uap->port.membase, uap->lcrh_tx);
+ 	}
+ }
+ 
+ static int pl011_allocate_irq(struct uart_amba_port *uap)
+ {
+-	writew(uap->im, uap->port.membase + UART011_IMSC);
++	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 
+ 	return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+ }
+@@ -1598,12 +1612,12 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
+ 	spin_lock_irq(&uap->port.lock);
+ 
+ 	/* Clear out any spuriously appearing RX interrupts */
+-	writew(UART011_RTIS | UART011_RXIS,
+-	       uap->port.membase + UART011_ICR);
++	pl011_write(UART011_RTIS | UART011_RXIS, uap->port.membase,
++	            UART011_ICR);
+ 	uap->im = UART011_RTIM;
+ 	if (!pl011_dma_rx_running(uap))
+ 		uap->im |= UART011_RXIM;
+-	writew(uap->im, uap->port.membase + UART011_IMSC);
++	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+ 	spin_unlock_irq(&uap->port.lock);
+ }
+ 
+@@ -1622,21 +1636,21 @@ static int pl011_startup(struct uart_port *port)
+ 	if (retval)
+ 		goto clk_dis;
+ 
+-	writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS);
++	pl011_write(uap->vendor->ifls, uap->port.membase, UART011_IFLS);
+ 
+ 	spin_lock_irq(&uap->port.lock);
+ 
+ 	/* restore RTS and DTR */
+ 	cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
+ 	cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
+-	writew(cr, uap->port.membase + UART011_CR);
++	pl011_write(cr, uap->port.membase, UART011_CR);
+ 
+ 	spin_unlock_irq(&uap->port.lock);
+ 
+ 	/*
+ 	 * initialise the old status of the modem signals
+ 	 */
+-	uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
++	uap->old_status = pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_MODEM_ANY;
+ 
+ 	/* Startup DMA */
+ 	pl011_dma_startup(uap);
+@@ -1677,9 +1691,9 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
+ {
+       unsigned long val;
+ 
+-      val = readw(uap->port.membase + lcrh);
++      val = pl011_read(uap->port.membase, lcrh);
+       val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+-      writew(val, uap->port.membase + lcrh);
++      pl011_write(val, uap->port.membase, lcrh);
+ }
+ 
+ /*
+@@ -1693,11 +1707,11 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
+ 
+ 	uap->autorts = false;
+ 	spin_lock_irq(&uap->port.lock);
+-	cr = readw(uap->port.membase + UART011_CR);
++	cr = pl011_read(uap->port.membase, UART011_CR);
+ 	uap->old_cr = cr;
+ 	cr &= UART011_CR_RTS | UART011_CR_DTR;
+ 	cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+-	writew(cr, uap->port.membase + UART011_CR);
++	pl011_write(cr, uap->port.membase, UART011_CR);
+ 	spin_unlock_irq(&uap->port.lock);
+ 
+ 	/*
+@@ -1714,8 +1728,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
+ 
+ 	/* mask all interrupts and clear all pending ones */
+ 	uap->im = 0;
+-	writew(uap->im, uap->port.membase + UART011_IMSC);
+-	writew(0xffff, uap->port.membase + UART011_ICR);
++	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++	pl011_write(0xffff, uap->port.membase, UART011_ICR);
+ 
+ 	spin_unlock_irq(&uap->port.lock);
+ }
+@@ -1867,8 +1881,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ 		pl011_enable_ms(port);
+ 
+ 	/* first, disable everything */
+-	old_cr = readw(port->membase + UART011_CR);
+-	writew(0, port->membase + UART011_CR);
++	old_cr = pl011_read(port->membase, UART011_CR);
++	pl011_write(0, port->membase, UART011_CR);
+ 
+ 	if (termios->c_cflag & CRTSCTS) {
+ 		if (old_cr & UART011_CR_RTS)
+@@ -1901,8 +1915,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ 			quot -= 2;
+ 	}
+ 	/* Set baud rate */
+-	writew(quot & 0x3f, port->membase + UART011_FBRD);
+-	writew(quot >> 6, port->membase + UART011_IBRD);
++	pl011_write(quot & 0x3f, port->membase, UART011_FBRD);
++	pl011_write(quot >> 6, port->membase, UART011_IBRD);
+ 
+ 	/*
+ 	 * ----------v----------v----------v----------v-----
+@@ -1911,7 +1925,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ 	 * ----------^----------^----------^----------^-----
+ 	 */
+ 	pl011_write_lcr_h(uap, lcr_h);
+-	writew(old_cr, port->membase + UART011_CR);
++	pl011_write(old_cr, port->membase, UART011_CR);
+ 
+ 	spin_unlock_irqrestore(&port->lock, flags);
+ }
+@@ -2052,9 +2066,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
+ 	struct uart_amba_port *uap =
+ 	    container_of(port, struct uart_amba_port, port);
+ 
+-	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
++	while (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF)
+ 		barrier();
+-	writew(ch, uap->port.membase + UART01x_DR);
++	pl011_write(ch, uap->port.membase, UART01x_DR);
+ }
+ 
+ static void
+@@ -2079,10 +2093,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
+ 	 *	First save the CR then disable the interrupts
+ 	 */
+ 	if (!uap->vendor->always_enabled) {
+-		old_cr = readw(uap->port.membase + UART011_CR);
++		old_cr = pl011_read(uap->port.membase, UART011_CR);
+ 		new_cr = old_cr & ~UART011_CR_CTSEN;
+ 		new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+-		writew(new_cr, uap->port.membase + UART011_CR);
++		pl011_write(new_cr, uap->port.membase, UART011_CR);
+ 	}
+ 
+ 	uart_console_write(&uap->port, s, count, pl011_console_putchar);
+@@ -2092,10 +2106,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
+ 	 *	and restore the TCR
+ 	 */
+ 	do {
+-		status = readw(uap->port.membase + UART01x_FR);
++		status = pl011_read(uap->port.membase, UART01x_FR);
+ 	} while (status & UART01x_FR_BUSY);
+ 	if (!uap->vendor->always_enabled)
+-		writew(old_cr, uap->port.membase + UART011_CR);
++		pl011_write(old_cr, uap->port.membase, UART011_CR);
+ 
+ 	if (locked)
+ 		spin_unlock(&uap->port.lock);
+@@ -2108,10 +2122,10 @@ static void __init
+ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+ 			     int *parity, int *bits)
+ {
+-	if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
++	if (pl011_read(uap->port.membase, UART011_CR) & UART01x_CR_UARTEN) {
+ 		unsigned int lcr_h, ibrd, fbrd;
+ 
+-		lcr_h = readw(uap->port.membase + uap->lcrh_tx);
++		lcr_h = pl011_read(uap->port.membase, uap->lcrh_tx);
+ 
+ 		*parity = 'n';
+ 		if (lcr_h & UART01x_LCRH_PEN) {
+@@ -2126,13 +2140,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+ 		else
+ 			*bits = 8;
+ 
+-		ibrd = readw(uap->port.membase + UART011_IBRD);
+-		fbrd = readw(uap->port.membase + UART011_FBRD);
++		ibrd = pl011_read(uap->port.membase, UART011_IBRD);
++		fbrd = pl011_read(uap->port.membase, UART011_FBRD);
+ 
+ 		*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+ 
+ 		if (uap->vendor->oversampling) {
+-			if (readw(uap->port.membase + UART011_CR)
++			if (pl011_read(uap->port.membase, UART011_CR)
+ 				  & ST_UART011_CR_OVSFACT)
+ 				*baud *= 2;
+ 		}
+@@ -2334,8 +2348,8 @@ static int pl011_register_port(struct uart_amba_port *uap)
+ 	int ret;
+ 
+ 	/* Ensure interrupts from this UART are masked and cleared */
+-	writew(0, uap->port.membase + UART011_IMSC);
+-	writew(0xffff, uap->port.membase + UART011_ICR);
++	pl011_write(0, uap->port.membase, UART011_IMSC);
++	pl011_write(0xffff, uap->port.membase, UART011_ICR);
+ 
+ 	if (!amba_reg.state) {
+ 		ret = uart_register_driver(&amba_reg);
diff --git a/SOURCES/4002-tty-amba-pl011-convert-accessor-functions-to-take-ua.patch b/SOURCES/4002-tty-amba-pl011-convert-accessor-functions-to-take-ua.patch
new file mode 100644
index 0000000..6524bda
--- /dev/null
+++ b/SOURCES/4002-tty-amba-pl011-convert-accessor-functions-to-take-ua.patch
@@ -0,0 +1,709 @@
+From: Russell King <rmk+kernel at arm.linux.org.uk>
+Date: Tue, 3 Nov 2015 14:51:03 +0000
+Subject: tty: amba-pl011: convert accessor functions to take uart_amba_port
+
+Convert the new accessor functions to take the uart_amba_port instead
+of the port base address.
+
+Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
+Reviewed-by: Peter Hurley <peter at hurleysoftware.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
+
+Git-commit: b2a4e24c2efd76a2c25478836fb35951e00d5b52
+Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+---
+ drivers/tty/serial/amba-pl011.c | 199 ++++++++++++++++++++--------------------
+ 1 file changed, 97 insertions(+), 102 deletions(-)
+
+diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
+index b75f750..61512af 100644
+--- a/drivers/tty/serial/amba-pl011.c
++++ b/drivers/tty/serial/amba-pl011.c
+@@ -184,14 +184,16 @@ struct uart_amba_port {
+ #endif
+ };
+ 
+-static unsigned int pl011_read(void __iomem *base, unsigned int reg)
++static unsigned int pl011_read(const struct uart_amba_port *uap,
++	unsigned int reg)
+ {
+-	return readw(base + reg);
++	return readw(uap->port.membase + reg);
+ }
+ 
+-static void pl011_write(unsigned int val, void __iomem *base, unsigned int reg)
++static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
++	unsigned int reg)
+ {
+-	writew(val, base + reg);
++	writew(val, uap->port.membase + reg);
+ }
+ 
+ /*
+@@ -206,13 +208,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
+ 	int fifotaken = 0;
+ 
+ 	while (max_count--) {
+-		status = pl011_read(uap->port.membase, UART01x_FR);
++		status = pl011_read(uap, UART01x_FR);
+ 		if (status & UART01x_FR_RXFE)
+ 			break;
+ 
+ 		/* Take chars from the FIFO and update status */
+-		ch = pl011_read(uap->port.membase, UART01x_DR) |
+-			UART_DUMMY_DR_RX;
++		ch = pl011_read(uap, UART01x_DR) | UART_DUMMY_DR_RX;
+ 		flag = TTY_NORMAL;
+ 		uap->port.icount.rx++;
+ 		fifotaken++;
+@@ -448,7 +449,7 @@ static void pl011_dma_tx_callback(void *data)
+ 
+ 	dmacr = uap->dmacr;
+ 	uap->dmacr = dmacr & ~UART011_TXDMAE;
+-	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++	pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 
+ 	/*
+ 	 * If TX DMA was disabled, it means that we've stopped the DMA for
+@@ -562,7 +563,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
+ 	dma_dev->device_issue_pending(chan);
+ 
+ 	uap->dmacr |= UART011_TXDMAE;
+-	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++	pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 	uap->dmatx.queued = true;
+ 
+ 	/*
+@@ -598,9 +599,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
+ 	 */
+ 	if (uap->dmatx.queued) {
+ 		uap->dmacr |= UART011_TXDMAE;
+-		pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++		pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 		uap->im &= ~UART011_TXIM;
+-		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++		pl011_write(uap->im, uap, UART011_IMSC);
+ 		return true;
+ 	}
+ 
+@@ -610,7 +611,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
+ 	 */
+ 	if (pl011_dma_tx_refill(uap) > 0) {
+ 		uap->im &= ~UART011_TXIM;
+-		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++		pl011_write(uap->im, uap, UART011_IMSC);
+ 		return true;
+ 	}
+ 	return false;
+@@ -624,7 +625,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
+ {
+ 	if (uap->dmatx.queued) {
+ 		uap->dmacr &= ~UART011_TXDMAE;
+-		pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++		pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 	}
+ }
+ 
+@@ -650,14 +651,12 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+ 		if (!uap->dmatx.queued) {
+ 			if (pl011_dma_tx_refill(uap) > 0) {
+ 				uap->im &= ~UART011_TXIM;
+-				pl011_write(uap->im, uap->port.membase,
+-					    UART011_IMSC);
++				pl011_write(uap->im, uap, UART011_IMSC);
+ 			} else
+ 				ret = false;
+ 		} else if (!(uap->dmacr & UART011_TXDMAE)) {
+ 			uap->dmacr |= UART011_TXDMAE;
+-			pl011_write(uap->dmacr, uap->port.membase,
+-				    UART011_DMACR);
++			pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 		}
+ 		return ret;
+ 	}
+@@ -668,9 +667,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+ 	 */
+ 	dmacr = uap->dmacr;
+ 	uap->dmacr &= ~UART011_TXDMAE;
+-	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++	pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 
+-	if (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF) {
++	if (pl011_read(uap, UART01x_FR) & UART01x_FR_TXFF) {
+ 		/*
+ 		 * No space in the FIFO, so enable the transmit interrupt
+ 		 * so we know when there is space.  Note that once we've
+@@ -679,13 +678,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+ 		return false;
+ 	}
+ 
+-	pl011_write(uap->port.x_char, uap->port.membase, UART01x_DR);
++	pl011_write(uap->port.x_char, uap, UART01x_DR);
+ 	uap->port.icount.tx++;
+ 	uap->port.x_char = 0;
+ 
+ 	/* Success - restore the DMA state */
+ 	uap->dmacr = dmacr;
+-	pl011_write(dmacr, uap->port.membase, UART011_DMACR);
++	pl011_write(dmacr, uap, UART011_DMACR);
+ 
+ 	return true;
+ }
+@@ -713,7 +712,7 @@ __acquires(&uap->port.lock)
+ 			     DMA_TO_DEVICE);
+ 		uap->dmatx.queued = false;
+ 		uap->dmacr &= ~UART011_TXDMAE;
+-		pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++		pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 	}
+ }
+ 
+@@ -753,11 +752,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
+ 	dma_async_issue_pending(rxchan);
+ 
+ 	uap->dmacr |= UART011_RXDMAE;
+-	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++	pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 	uap->dmarx.running = true;
+ 
+ 	uap->im &= ~UART011_RXIM;
+-	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++	pl011_write(uap->im, uap, UART011_IMSC);
+ 
+ 	return 0;
+ }
+@@ -816,7 +815,7 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
+ 	if (dma_count == pending && readfifo) {
+ 		/* Clear any error flags */
+ 		pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
+-			    UART011_FEIS, uap->port.membase, UART011_ICR);
++			    UART011_FEIS, uap, UART011_ICR);
+ 
+ 		/*
+ 		 * If we read all the DMA'd characters, and we had an
+@@ -864,7 +863,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
+ 
+ 	/* Disable RX DMA - incoming data will wait in the FIFO */
+ 	uap->dmacr &= ~UART011_RXDMAE;
+-	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++	pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 	uap->dmarx.running = false;
+ 
+ 	pending = sgbuf->sg.length - state.residue;
+@@ -884,7 +883,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
+ 		dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
+ 			"fall back to interrupt mode\n");
+ 		uap->im |= UART011_RXIM;
+-		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++		pl011_write(uap->im, uap, UART011_IMSC);
+ 	}
+ }
+ 
+@@ -932,7 +931,7 @@ static void pl011_dma_rx_callback(void *data)
+ 		dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
+ 			"fall back to interrupt mode\n");
+ 		uap->im |= UART011_RXIM;
+-		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++		pl011_write(uap->im, uap, UART011_IMSC);
+ 	}
+ }
+ 
+@@ -945,7 +944,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
+ {
+ 	/* FIXME.  Just disable the DMA enable */
+ 	uap->dmacr &= ~UART011_RXDMAE;
+-	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++	pl011_write(uap->dmacr, uap, UART011_DMACR);
+ }
+ 
+ /*
+@@ -989,7 +988,7 @@ static void pl011_dma_rx_poll(unsigned long args)
+ 		spin_lock_irqsave(&uap->port.lock, flags);
+ 		pl011_dma_rx_stop(uap);
+ 		uap->im |= UART011_RXIM;
+-		pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++		pl011_write(uap->im, uap, UART011_IMSC);
+ 		spin_unlock_irqrestore(&uap->port.lock, flags);
+ 
+ 		uap->dmarx.running = false;
+@@ -1051,7 +1050,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
+ skip_rx:
+ 	/* Turn on DMA error (RX/TX will be enabled on demand) */
+ 	uap->dmacr |= UART011_DMAONERR;
+-	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++	pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 
+ 	/*
+ 	 * ST Micro variants has some specific dma burst threshold
+@@ -1060,7 +1059,7 @@ skip_rx:
+ 	 */
+ 	if (uap->vendor->dma_threshold)
+ 		pl011_write(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
+-			    uap->port.membase, ST_UART011_DMAWM);
++			    uap, ST_UART011_DMAWM);
+ 
+ 	if (uap->using_rx_dma) {
+ 		if (pl011_dma_rx_trigger_dma(uap))
+@@ -1085,12 +1084,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
+ 		return;
+ 
+ 	/* Disable RX and TX DMA */
+-	while (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_BUSY)
++	while (pl011_read(uap, UART01x_FR) & UART01x_FR_BUSY)
+ 		barrier();
+ 
+ 	spin_lock_irq(&uap->port.lock);
+ 	uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
+-	pl011_write(uap->dmacr, uap->port.membase, UART011_DMACR);
++	pl011_write(uap->dmacr, uap, UART011_DMACR);
+ 	spin_unlock_irq(&uap->port.lock);
+ 
+ 	if (uap->using_tx_dma) {
+@@ -1191,7 +1190,7 @@ static void pl011_stop_tx(struct uart_port *port)
+ 	    container_of(port, struct uart_amba_port, port);
+ 
+ 	uap->im &= ~UART011_TXIM;
+-	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++	pl011_write(uap->im, uap, UART011_IMSC);
+ 	pl011_dma_tx_stop(uap);
+ }
+ 
+@@ -1201,7 +1200,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
+ static void pl011_start_tx_pio(struct uart_amba_port *uap)
+ {
+ 	uap->im |= UART011_TXIM;
+-	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++	pl011_write(uap->im, uap, UART011_IMSC);
+ 	pl011_tx_chars(uap, false);
+ }
+ 
+@@ -1221,7 +1220,7 @@ static void pl011_stop_rx(struct uart_port *port)
+ 
+ 	uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
+ 		     UART011_PEIM|UART011_BEIM|UART011_OEIM);
+-	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++	pl011_write(uap->im, uap, UART011_IMSC);
+ 
+ 	pl011_dma_rx_stop(uap);
+ }
+@@ -1232,7 +1231,7 @@ static void pl011_enable_ms(struct uart_port *port)
+ 	    container_of(port, struct uart_amba_port, port);
+ 
+ 	uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
+-	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++	pl011_write(uap->im, uap, UART011_IMSC);
+ }
+ 
+ static void pl011_rx_chars(struct uart_amba_port *uap)
+@@ -1252,7 +1251,7 @@ __acquires(&uap->port.lock)
+ 			dev_dbg(uap->port.dev, "could not trigger RX DMA job "
+ 				"fall back to interrupt mode again\n");
+ 			uap->im |= UART011_RXIM;
+-			pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++			pl011_write(uap->im, uap, UART011_IMSC);
+ 		} else {
+ #ifdef CONFIG_DMA_ENGINE
+ 			/* Start Rx DMA poll */
+@@ -1273,10 +1272,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
+ 			  bool from_irq)
+ {
+ 	if (unlikely(!from_irq) &&
+-	    pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF)
++	    pl011_read(uap, UART01x_FR) & UART01x_FR_TXFF)
+ 		return false; /* unable to transmit character */
+ 
+-	pl011_write(c, uap->port.membase, UART01x_DR);
++	pl011_write(c, uap, UART01x_DR);
+ 	uap->port.icount.tx++;
+ 
+ 	return true;
+@@ -1323,8 +1322,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
+ {
+ 	unsigned int status, delta;
+ 
+-	status = pl011_read(uap->port.membase, UART01x_FR);
+-	status &= UART01x_FR_MODEM_ANY;
++	status = pl011_read(uap, UART01x_FR) & UART01x_FR_MODEM_ANY;
+ 
+ 	delta = status ^ uap->old_status;
+ 	uap->old_status = status;
+@@ -1352,15 +1350,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
+ 		return;
+ 
+ 	/* workaround to make sure that all bits are unlocked.. */
+-	pl011_write(0x00, uap->port.membase, UART011_ICR);
++	pl011_write(0x00, uap, UART011_ICR);
+ 
+ 	/*
+ 	 * WA: introduce 26ns(1 uart clk) delay before W1C;
+ 	 * single apb access will incur 2 pclk(133.12Mhz) delay,
+ 	 * so add 2 dummy reads
+ 	 */
+-	dummy_read = pl011_read(uap->port.membase, UART011_ICR);
+-	dummy_read = pl011_read(uap->port.membase, UART011_ICR);
++	dummy_read = pl011_read(uap, UART011_ICR);
++	dummy_read = pl011_read(uap, UART011_ICR);
+ }
+ 
+ static irqreturn_t pl011_int(int irq, void *dev_id)
+@@ -1372,15 +1370,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
+ 	int handled = 0;
+ 
+ 	spin_lock_irqsave(&uap->port.lock, flags);
+-	imsc = pl011_read(uap->port.membase, UART011_IMSC);
+-	status = pl011_read(uap->port.membase, UART011_RIS) & imsc;
++	imsc = pl011_read(uap, UART011_IMSC);
++	status = pl011_read(uap, UART011_RIS) & imsc;
+ 	if (status) {
+ 		do {
+ 			check_apply_cts_event_workaround(uap);
+ 
+ 			pl011_write(status & ~(UART011_TXIS|UART011_RTIS|
+ 					       UART011_RXIS),
+-				    uap->port.membase, UART011_ICR);
++				    uap, UART011_ICR);
+ 
+ 			if (status & (UART011_RTIS|UART011_RXIS)) {
+ 				if (pl011_dma_rx_running(uap))
+@@ -1397,7 +1395,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
+ 			if (pass_counter-- == 0)
+ 				break;
+ 
+-			status = pl011_read(uap->port.membase, UART011_RIS) & imsc;
++			status = pl011_read(uap, UART011_RIS) & imsc;
+ 		} while (status != 0);
+ 		handled = 1;
+ 	}
+@@ -1411,7 +1409,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
+ {
+ 	struct uart_amba_port *uap =
+ 	    container_of(port, struct uart_amba_port, port);
+-	unsigned int status = pl011_read(uap->port.membase, UART01x_FR);
++	unsigned int status = pl011_read(uap, UART01x_FR);
+ 	return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+ }
+ 
+@@ -1420,7 +1418,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
+ 	struct uart_amba_port *uap =
+ 	    container_of(port, struct uart_amba_port, port);
+ 	unsigned int result = 0;
+-	unsigned int status = pl011_read(uap->port.membase, UART01x_FR);
++	unsigned int status = pl011_read(uap, UART01x_FR);
+ 
+ #define TIOCMBIT(uartbit, tiocmbit)	\
+ 	if (status & uartbit)		\
+@@ -1440,7 +1438,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
+ 	    container_of(port, struct uart_amba_port, port);
+ 	unsigned int cr;
+ 
+-	cr = pl011_read(uap->port.membase, UART011_CR);
++	cr = pl011_read(uap, UART011_CR);
+ 
+ #define	TIOCMBIT(tiocmbit, uartbit)		\
+ 	if (mctrl & tiocmbit)		\
+@@ -1460,7 +1458,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
+ 	}
+ #undef TIOCMBIT
+ 
+-	pl011_write(cr, uap->port.membase, UART011_CR);
++	pl011_write(cr, uap, UART011_CR);
+ }
+ 
+ static void pl011_break_ctl(struct uart_port *port, int break_state)
+@@ -1471,12 +1469,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
+ 	unsigned int lcr_h;
+ 
+ 	spin_lock_irqsave(&uap->port.lock, flags);
+-	lcr_h = pl011_read(uap->port.membase, uap->lcrh_tx);
++	lcr_h = pl011_read(uap, uap->lcrh_tx);
+ 	if (break_state == -1)
+ 		lcr_h |= UART01x_LCRH_BRK;
+ 	else
+ 		lcr_h &= ~UART01x_LCRH_BRK;
+-	pl011_write(lcr_h, uap->port.membase, uap->lcrh_tx);
++	pl011_write(lcr_h, uap, uap->lcrh_tx);
+ 	spin_unlock_irqrestore(&uap->port.lock, flags);
+ }
+ 
+@@ -1486,9 +1484,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
+ {
+ 	struct uart_amba_port *uap =
+ 	    container_of(port, struct uart_amba_port, port);
+-	unsigned char __iomem *regs = uap->port.membase;
+ 
+-	pl011_write(pl011_read(regs, UART011_MIS), regs, UART011_ICR);
++	pl011_write(pl011_read(uap, UART011_MIS), uap, UART011_ICR);
+ 	/*
+ 	 * There is no way to clear TXIM as this is "ready to transmit IRQ", so
+ 	 * we simply mask it. start_tx() will unmask it.
+@@ -1502,8 +1499,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
+ 	 * (including tx queue), so we're also fine with start_tx()'s caller
+ 	 * side.
+ 	 */
+-	pl011_write(pl011_read(regs, UART011_IMSC) & ~UART011_TXIM,
+-		    regs, UART011_IMSC);
++	pl011_write(pl011_read(uap, UART011_IMSC) & ~UART011_TXIM, uap,
++		    UART011_IMSC);
+ }
+ 
+ static int pl011_get_poll_char(struct uart_port *port)
+@@ -1518,11 +1515,11 @@ static int pl011_get_poll_char(struct uart_port *port)
+ 	 */
+ 	pl011_quiesce_irqs(port);
+ 
+-	status = pl011_read(uap->port.membase, UART01x_FR);
++	status = pl011_read(uap, UART01x_FR);
+ 	if (status & UART01x_FR_RXFE)
+ 		return NO_POLL_CHAR;
+ 
+-	return pl011_read(uap->port.membase, UART01x_DR);
++	return pl011_read(uap, UART01x_DR);
+ }
+ 
+ static void pl011_put_poll_char(struct uart_port *port,
+@@ -1531,10 +1528,10 @@ static void pl011_put_poll_char(struct uart_port *port,
+ 	struct uart_amba_port *uap =
+ 	    container_of(port, struct uart_amba_port, port);
+ 
+-	while (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF)
++	while (pl011_read(uap, UART01x_FR) & UART01x_FR_TXFF)
+ 		barrier();
+ 
+-	pl011_write(ch, uap->port.membase, UART01x_DR);
++	pl011_write(ch, uap, UART01x_DR);
+ }
+ 
+ #endif /* CONFIG_CONSOLE_POLL */
+@@ -1560,15 +1557,14 @@ static int pl011_hwinit(struct uart_port *port)
+ 	/* Clear pending error and receive interrupts */
+ 	pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
+ 		    UART011_FEIS | UART011_RTIS | UART011_RXIS,
+-		    uap->port.membase, UART011_ICR);
++		    uap, UART011_ICR);
+ 
+ 	/*
+ 	 * Save interrupts enable mask, and enable RX interrupts in case if
+ 	 * the interrupt is used for NMI entry.
+ 	 */
+-	uap->im = pl011_read(uap->port.membase, UART011_IMSC);
+-	pl011_write(UART011_RTIM | UART011_RXIM, uap->port.membase,
+-		    UART011_IMSC);
++	uap->im = pl011_read(uap, UART011_IMSC);
++	pl011_write(UART011_RTIM | UART011_RXIM, uap, UART011_IMSC);
+ 
+ 	if (dev_get_platdata(uap->port.dev)) {
+ 		struct amba_pl011_data *plat;
+@@ -1582,7 +1578,7 @@ static int pl011_hwinit(struct uart_port *port)
+ 
+ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
+ {
+-	pl011_write(lcr_h, uap->port.membase, uap->lcrh_rx);
++	pl011_write(lcr_h, uap, uap->lcrh_rx);
+ 	if (uap->lcrh_rx != uap->lcrh_tx) {
+ 		int i;
+ 		/*
+@@ -1590,14 +1586,14 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
+ 		 * to get this delay write read only register 10 times
+ 		 */
+ 		for (i = 0; i < 10; ++i)
+-			pl011_write(0xff, uap->port.membase, UART011_MIS);
+-		pl011_write(lcr_h, uap->port.membase, uap->lcrh_tx);
++			pl011_write(0xff, uap, UART011_MIS);
++		pl011_write(lcr_h, uap, uap->lcrh_tx);
+ 	}
+ }
+ 
+ static int pl011_allocate_irq(struct uart_amba_port *uap)
+ {
+-	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++	pl011_write(uap->im, uap, UART011_IMSC);
+ 
+ 	return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+ }
+@@ -1612,12 +1608,11 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
+ 	spin_lock_irq(&uap->port.lock);
+ 
+ 	/* Clear out any spuriously appearing RX interrupts */
+-	pl011_write(UART011_RTIS | UART011_RXIS, uap->port.membase,
+-	            UART011_ICR);
++	pl011_write(UART011_RTIS | UART011_RXIS, uap, UART011_ICR);
+ 	uap->im = UART011_RTIM;
+ 	if (!pl011_dma_rx_running(uap))
+ 		uap->im |= UART011_RXIM;
+-	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
++	pl011_write(uap->im, uap, UART011_IMSC);
+ 	spin_unlock_irq(&uap->port.lock);
+ }
+ 
+@@ -1636,21 +1631,21 @@ static int pl011_startup(struct uart_port *port)
+ 	if (retval)
+ 		goto clk_dis;
+ 
+-	pl011_write(uap->vendor->ifls, uap->port.membase, UART011_IFLS);
++	pl011_write(uap->vendor->ifls, uap, UART011_IFLS);
+ 
+ 	spin_lock_irq(&uap->port.lock);
+ 
+ 	/* restore RTS and DTR */
+ 	cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
+ 	cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
+-	pl011_write(cr, uap->port.membase, UART011_CR);
++	pl011_write(cr, uap, UART011_CR);
+ 
+ 	spin_unlock_irq(&uap->port.lock);
+ 
+ 	/*
+ 	 * initialise the old status of the modem signals
+ 	 */
+-	uap->old_status = pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_MODEM_ANY;
++	uap->old_status = pl011_read(uap, UART01x_FR) & UART01x_FR_MODEM_ANY;
+ 
+ 	/* Startup DMA */
+ 	pl011_dma_startup(uap);
+@@ -1691,9 +1686,9 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
+ {
+       unsigned long val;
+ 
+-      val = pl011_read(uap->port.membase, lcrh);
++      val = pl011_read(uap, lcrh);
+       val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+-      pl011_write(val, uap->port.membase, lcrh);
++      pl011_write(val, uap, lcrh);
+ }
+ 
+ /*
+@@ -1707,11 +1702,11 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
+ 
+ 	uap->autorts = false;
+ 	spin_lock_irq(&uap->port.lock);
+-	cr = pl011_read(uap->port.membase, UART011_CR);
++	cr = pl011_read(uap, UART011_CR);
+ 	uap->old_cr = cr;
+ 	cr &= UART011_CR_RTS | UART011_CR_DTR;
+ 	cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+-	pl011_write(cr, uap->port.membase, UART011_CR);
++	pl011_write(cr, uap, UART011_CR);
+ 	spin_unlock_irq(&uap->port.lock);
+ 
+ 	/*
+@@ -1728,8 +1723,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
+ 
+ 	/* mask all interrupts and clear all pending ones */
+ 	uap->im = 0;
+-	pl011_write(uap->im, uap->port.membase, UART011_IMSC);
+-	pl011_write(0xffff, uap->port.membase, UART011_ICR);
++	pl011_write(uap->im, uap, UART011_IMSC);
++	pl011_write(0xffff, uap, UART011_ICR);
+ 
+ 	spin_unlock_irq(&uap->port.lock);
+ }
+@@ -1881,8 +1876,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ 		pl011_enable_ms(port);
+ 
+ 	/* first, disable everything */
+-	old_cr = pl011_read(port->membase, UART011_CR);
+-	pl011_write(0, port->membase, UART011_CR);
++	old_cr = pl011_read(uap, UART011_CR);
++	pl011_write(0, uap, UART011_CR);
+ 
+ 	if (termios->c_cflag & CRTSCTS) {
+ 		if (old_cr & UART011_CR_RTS)
+@@ -1915,8 +1910,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ 			quot -= 2;
+ 	}
+ 	/* Set baud rate */
+-	pl011_write(quot & 0x3f, port->membase, UART011_FBRD);
+-	pl011_write(quot >> 6, port->membase, UART011_IBRD);
++	pl011_write(quot & 0x3f, uap, UART011_FBRD);
++	pl011_write(quot >> 6, uap, UART011_IBRD);
+ 
+ 	/*
+ 	 * ----------v----------v----------v----------v-----
+@@ -1925,7 +1920,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
+ 	 * ----------^----------^----------^----------^-----
+ 	 */
+ 	pl011_write_lcr_h(uap, lcr_h);
+-	pl011_write(old_cr, port->membase, UART011_CR);
++	pl011_write(old_cr, uap, UART011_CR);
+ 
+ 	spin_unlock_irqrestore(&port->lock, flags);
+ }
+@@ -2066,9 +2061,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
+ 	struct uart_amba_port *uap =
+ 	    container_of(port, struct uart_amba_port, port);
+ 
+-	while (pl011_read(uap->port.membase, UART01x_FR) & UART01x_FR_TXFF)
++	while (pl011_read(uap, UART01x_FR) & UART01x_FR_TXFF)
+ 		barrier();
+-	pl011_write(ch, uap->port.membase, UART01x_DR);
++	pl011_write(ch, uap, UART01x_DR);
+ }
+ 
+ static void
+@@ -2093,10 +2088,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
+ 	 *	First save the CR then disable the interrupts
+ 	 */
+ 	if (!uap->vendor->always_enabled) {
+-		old_cr = pl011_read(uap->port.membase, UART011_CR);
++		old_cr = pl011_read(uap, UART011_CR);
+ 		new_cr = old_cr & ~UART011_CR_CTSEN;
+ 		new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+-		pl011_write(new_cr, uap->port.membase, UART011_CR);
++		pl011_write(new_cr, uap, UART011_CR);
+ 	}
+ 
+ 	uart_console_write(&uap->port, s, count, pl011_console_putchar);
+@@ -2106,10 +2101,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
+ 	 *	and restore the TCR
+ 	 */
+ 	do {
+-		status = pl011_read(uap->port.membase, UART01x_FR);
++		status = pl011_read(uap, UART01x_FR);
+ 	} while (status & UART01x_FR_BUSY);
+ 	if (!uap->vendor->always_enabled)
+-		pl011_write(old_cr, uap->port.membase, UART011_CR);
++		pl011_write(old_cr, uap, UART011_CR);
+ 
+ 	if (locked)
+ 		spin_unlock(&uap->port.lock);
+@@ -2122,10 +2117,10 @@ static void __init
+ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+ 			     int *parity, int *bits)
+ {
+-	if (pl011_read(uap->port.membase, UART011_CR) & UART01x_CR_UARTEN) {
++	if (pl011_read(uap, UART011_CR) & UART01x_CR_UARTEN) {
+ 		unsigned int lcr_h, ibrd, fbrd;
+ 
+-		lcr_h = pl011_read(uap->port.membase, uap->lcrh_tx);
++		lcr_h = pl011_read(uap, uap->lcrh_tx);
+ 
+ 		*parity = 'n';
+ 		if (lcr_h & UART01x_LCRH_PEN) {
+@@ -2140,13 +2135,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+ 		else
+ 			*bits = 8;
+ 
+-		ibrd = pl011_read(uap->port.membase, UART011_IBRD);
+-		fbrd = pl011_read(uap->port.membase, UART011_FBRD);
++		ibrd = pl011_read(uap, UART011_IBRD);
++		fbrd = pl011_read(uap, UART011_FBRD);
+ 
+ 		*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+ 
+ 		if (uap->vendor->oversampling) {
+-			if (pl011_read(uap->port.membase, UART011_CR)
++			if (pl011_read(uap, UART011_CR)
+ 				  & ST_UART011_CR_OVSFACT)
+ 				*baud *= 2;
+ 		}
+@@ -2348,8 +2343,8 @@ static int pl011_register_port(struct uart_amba_port *uap)
+ 	int ret;
+ 
+ 	/* Ensure interrupts from this UART are masked and cleared */
+-	pl011_write(0, uap->port.membase, UART011_IMSC);
+-	pl011_write(0xffff, uap->port.membase, UART011_ICR);
++	pl011_write(0, uap, UART011_IMSC);
++	pl011_write(0xffff, uap, UART011_ICR);
+ 
+ 	if (!amba_reg.state) {
+ 		ret = uart_register_driver(&amba_reg);
diff --git a/SOURCES/4003-tty-amba-pl011-add-support-for-32-bit-register-acces.patch b/SOURCES/4003-tty-amba-pl011-add-support-for-32-bit-register-acces.patch
new file mode 100644
index 0000000..c2fdb4b
--- /dev/null
+++ b/SOURCES/4003-tty-amba-pl011-add-support-for-32-bit-register-acces.patch
@@ -0,0 +1,79 @@
+From: Russell King <rmk+kernel at arm.linux.org.uk>
+Date: Mon, 16 Nov 2015 17:40:52 +0000
+Subject: tty: amba-pl011: add support for 32-bit register access
+
+Add support for 32-bit register accesses to the AMBA PL011 UART.  This
+is needed for ZTE UARTs, which require 32-bit accesses as opposed to
+the more normal 16-bit accesses.
+
+Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
+Reviewed-by: Peter Hurley <peter at hurleysoftware.com>
+Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
+
+Git-commit: 84c3e03bdd1146191b7222ed62a08512199a45c7
+Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+[cov at codeaurora.org: Backport to CentOS 7.2]
+Signed-off-by: Christopher Covington <cov at codeaurora.org>
+---
+ drivers/tty/serial/amba-pl011.c | 15 +++++++++++++--
+ 1 file changed, 13 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
+index 61512af..bb49704 100644
+--- a/drivers/tty/serial/amba-pl011.c
++++ b/drivers/tty/serial/amba-pl011.c
+@@ -74,6 +74,7 @@
+ /* There is by now at least one vendor with differing details, so handle it */
+ struct vendor_data {
+ 	unsigned int		ifls;
++	bool			access_32b;
+ 	unsigned int		lcrh_tx;
+ 	unsigned int		lcrh_rx;
+ 	bool			oversampling;
+@@ -172,6 +173,7 @@ struct uart_amba_port {
+ 	unsigned int		lcrh_rx;	/* vendor-specific */
+ 	unsigned int		old_cr;		/* state during shutdown */
+ 	bool			autorts;
++	bool			access_32b;
+ 	unsigned int		fixed_baud;	/* vendor-set fixed baud rate */
+ 	char			type[12];
+ #ifdef CONFIG_DMA_ENGINE
+@@ -187,13 +189,20 @@ struct uart_amba_port {
+ static unsigned int pl011_read(const struct uart_amba_port *uap,
+ 	unsigned int reg)
+ {
+-	return readw(uap->port.membase + reg);
++	void __iomem *addr = uap->port.membase + reg;
++
++	return uap->access_32b ? readl(addr) : readw(addr);
+ }
+ 
+ static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
+ 	unsigned int reg)
+ {
+-	writew(val, uap->port.membase + reg);
++	void __iomem *addr = uap->port.membase + reg;
++
++	if (uap->access_32b)
++		writel(val, addr);
++	else
++		writew(val, addr);
+ }
+ 
+ /*
+@@ -2381,6 +2390,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
+ 	if (IS_ERR(uap->clk))
+ 		return PTR_ERR(uap->clk);
+ 
++	uap->access_32b = vendor->access_32b;
+ 	uap->vendor = vendor;
+ 	uap->lcrh_rx = vendor->lcrh_rx;
+ 	uap->lcrh_tx = vendor->lcrh_tx;
+@@ -2462,6 +2472,7 @@ static int sbsa_uart_probe(struct platform_device *pdev)
+ 	if (!uap)
+ 		return -ENOMEM;
+ 
++	uap->access_32b = vendor_sbsa.access_32b;
+ 	uap->vendor	= &vendor_sbsa;
+ 	uap->fifosize	= 32;
+ 	uap->port.irq	= platform_get_irq(pdev, 0);
diff --git a/SOURCES/4004-tty-amba-pl011-use-iotype-instead-of-access_32b-to-t.patch b/SOURCES/4004-tty-amba-pl011-use-iotype-instead-of-access_32b-to-t.patch
new file mode 100644
index 0000000..c8250c4
--- /dev/null
+++ b/SOURCES/4004-tty-amba-pl011-use-iotype-instead-of-access_32b-to-t.patch
@@ -0,0 +1,119 @@
+From: Timur Tabi <timur at codeaurora.org>
+Date: Mon, 4 Jan 2016 15:37:42 -0600
+Subject: tty: amba-pl011: use iotype instead of access_32b to track 32-bit I/O
+
+Instead of defining a new field in the uart_amba_port structure, use the
+existing iotype field of the uart_port structure, which is intended for
+this purpose.  If we need to use 32-bit register access, we set iotype
+to UPIO_MEM32, otherwise we set it to UPIO_MEM.
+
+For early console, specify the "mmio32" option on the kernel command-line.
+Example:
+
+        earlycon=pl011,mmio32,0x3ced1000
+
+Signed-off-by: Timur Tabi <timur at codeaurora.org>
+Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
+
+Git-commit: 3b78fae793c027140cfe635ef216bf60aa6498f4
+Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+[cov at codeaurora.org: Backport to CentOS 7.2]
+Signed-off-by: Christopher Covington <cov at codeaurora.org>
+---
+ Documentation/kernel-parameters.txt |  5 ++++-
+ drivers/tty/serial/amba-pl011.c     | 15 ++++++++-------
+ 2 files changed, 12 insertions(+), 8 deletions(-)
+
+diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
+index 1d6f045..59bebdd 100644
+--- a/Documentation/kernel-parameters.txt
++++ b/Documentation/kernel-parameters.txt
+@@ -990,10 +990,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
+ 			unspecified, the h/w is not initialized.
+ 
+ 		pl011,<addr>
++		pl011,mmio32,<addr>
+ 			Start an early, polled-mode console on a pl011 serial
+ 			port at the specified address. The pl011 serial port
+ 			must already be setup and configured. Options are not
+-			yet supported.
++			yet supported.  If 'mmio32' is specified, then only
++			the driver will use only 32-bit accessors to read/write
++			the device registers.
+ 
+ 		msm_serial,<addr>
+ 			Start an early, polled-mode console on an msm serial
+diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
+index bb49704..85cf7d0 100644
+--- a/drivers/tty/serial/amba-pl011.c
++++ b/drivers/tty/serial/amba-pl011.c
+@@ -173,7 +173,6 @@ struct uart_amba_port {
+ 	unsigned int		lcrh_rx;	/* vendor-specific */
+ 	unsigned int		old_cr;		/* state during shutdown */
+ 	bool			autorts;
+-	bool			access_32b;
+ 	unsigned int		fixed_baud;	/* vendor-set fixed baud rate */
+ 	char			type[12];
+ #ifdef CONFIG_DMA_ENGINE
+@@ -191,7 +190,7 @@ static unsigned int pl011_read(const struct uart_amba_port *uap,
+ {
+ 	void __iomem *addr = uap->port.membase + reg;
+ 
+-	return uap->access_32b ? readl(addr) : readw(addr);
++	return (uap->port.iotype == UPIO_MEM32) ? readl(addr) : readw(addr);
+ }
+ 
+ static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
+@@ -199,7 +198,7 @@ static void pl011_write(unsigned int val, const struct uart_amba_port *uap,
+ {
+ 	void __iomem *addr = uap->port.membase + reg;
+ 
+-	if (uap->access_32b)
++	if (uap->port.iotype == UPIO_MEM32)
+ 		writel(val, addr);
+ 	else
+ 		writew(val, addr);
+@@ -2224,7 +2223,10 @@ static void pl011_putc(struct uart_port *port, int c)
+ {
+ 	while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
+ 		;
+-	writeb(c, port->membase + UART01x_DR);
++	if (port->iotype == UPIO_MEM32)
++		writel(c, port->membase + UART01x_DR);
++	else
++		writeb(c, port->membase + UART01x_DR);
+ 	while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY)
+ 		;
+ }
+@@ -2337,7 +2339,6 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
+ 	uap->port.dev = dev;
+ 	uap->port.mapbase = mmiobase->start;
+ 	uap->port.membase = base;
+-	uap->port.iotype = UPIO_MEM;
+ 	uap->port.fifosize = uap->fifosize;
+ 	uap->port.flags = UPF_BOOT_AUTOCONF;
+ 	uap->port.line = index;
+@@ -2390,11 +2391,11 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
+ 	if (IS_ERR(uap->clk))
+ 		return PTR_ERR(uap->clk);
+ 
+-	uap->access_32b = vendor->access_32b;
+ 	uap->vendor = vendor;
+ 	uap->lcrh_rx = vendor->lcrh_rx;
+ 	uap->lcrh_tx = vendor->lcrh_tx;
+ 	uap->fifosize = vendor->get_fifosize(dev);
++	uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
+ 	uap->port.irq = dev->irq[0];
+ 	uap->port.ops = &amba_pl011_pops;
+ 
+@@ -2472,9 +2473,9 @@ static int sbsa_uart_probe(struct platform_device *pdev)
+ 	if (!uap)
+ 		return -ENOMEM;
+ 
+-	uap->access_32b = vendor_sbsa.access_32b;
+ 	uap->vendor	= &vendor_sbsa;
+ 	uap->fifosize	= 32;
++	uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM;
+ 	uap->port.irq	= platform_get_irq(pdev, 0);
+ 	uap->port.ops	= &sbsa_uart_pops;
+ 	uap->fixed_baud = baudrate;
diff --git a/SOURCES/4005-tty-amba-pl011-Use-32-bit-accesses-for-SBSA-UART.patch b/SOURCES/4005-tty-amba-pl011-Use-32-bit-accesses-for-SBSA-UART.patch
new file mode 100644
index 0000000..1d5e226
--- /dev/null
+++ b/SOURCES/4005-tty-amba-pl011-Use-32-bit-accesses-for-SBSA-UART.patch
@@ -0,0 +1,29 @@
+From: Christopher Covington <cov at codeaurora.org>
+Date: Tue, 19 Apr 2016 13:52:25 -0400
+Subject: tty: amba-pl011: Use 32-bit accesses for SBSA UART
+
+Version 2 of the Server Base System Architecture (SBSAv2) describes UART
+hardware registers as 32 bits wide, giving no guidance on access sizes. The
+SBSA UART driver previously assumed partial-length 16 and 8 bit accesses would
+work. But the SBSAv2 UART hardware on the Qualcomm Technologies QDF2432 only
+supports full-length 32 bit register accesses, so use those exclusively. This
+is compatible with SBSAv3, which explicitly requires UART hardware support 32
+(and 16 and sometimes 8) bit accesses.
+
+Signed-off-by: Christopher Covington <cov at codeaurora>
+---
+ drivers/tty/serial/amba-pl011.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
+index 85cf7d0..7127ae0 100644
+--- a/drivers/tty/serial/amba-pl011.c
++++ b/drivers/tty/serial/amba-pl011.c
+@@ -104,6 +104,7 @@ static struct vendor_data vendor_arm = {
+ };
+ 
+ static struct vendor_data vendor_sbsa = {
++	.access_32b		= true,
+ 	.oversampling		= false,
+ 	.dma_threshold		= false,
+ 	.cts_event_workaround	= false,
diff --git a/SOURCES/4006-irqchip-Fully-support-ACPI-GICv3-ITS.patch b/SOURCES/4006-irqchip-Fully-support-ACPI-GICv3-ITS.patch
new file mode 100644
index 0000000..555fe45
--- /dev/null
+++ b/SOURCES/4006-irqchip-Fully-support-ACPI-GICv3-ITS.patch
@@ -0,0 +1,49 @@
+From: Christopher Covington <cov at codeaurora.org>
+Date: Fri, 29 Apr 2016 16:06:41 -0400
+Subject: irqchip: Fully support ACPI GICv3 ITS
+
+Remove stray references to device-tree-specific strings.
+
+Signed-off-by: Christopher Covington <cov at codeaurora.org>
+---
+ drivers/irqchip/irq-gic-v3-its.c | 13 ++++++-------
+ 1 file changed, 6 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
+index 3da7a09..2989634 100644
+--- a/drivers/irqchip/irq-gic-v3-its.c
++++ b/drivers/irqchip/irq-gic-v3-its.c
+@@ -887,8 +887,8 @@ static int its_alloc_tables(struct its_node *its)
+ 				    order);
+ 			if (order >= MAX_ORDER) {
+ 				order = MAX_ORDER - 1;
+-				pr_warn("%s: Device Table too large, reduce its page order to %u\n",
+-					its->domain->of_node->full_name, order);
++				pr_warn("ITS: Device Table too large, reduce its page order to %u\n",
++					order);
+ 			}
+ 		}
+ 
+@@ -897,8 +897,8 @@ static int its_alloc_tables(struct its_node *its)
+ 		if (alloc_pages > GITS_BASER_PAGES_MAX) {
+ 			alloc_pages = GITS_BASER_PAGES_MAX;
+ 			order = get_order(GITS_BASER_PAGES_MAX * psz);
+-			pr_warn("%s: Device Table too large, reduce its page order to %u (%u pages)\n",
+-				its->domain->of_node->full_name, order, alloc_pages);
++			pr_warn("ITS: Device Table too large, reduce its page order to %u (%u pages)\n",
++				order, alloc_pages);
+ 		}
+ 
+ 		base = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
+@@ -965,9 +965,8 @@ retry_baser:
+ 		}
+ 
+ 		if (val != tmp) {
+-			pr_err("ITS: %s: GITS_BASER%d doesn't stick: %lx %lx\n",
+-			       its->domain->of_node->full_name, i,
+-			       (unsigned long) val, (unsigned long) tmp);
++			pr_err("ITS: GITS_BASER%d doesn't stick: %lx %lx\n",
++			       i, (unsigned long) val, (unsigned long) tmp);
+ 			err = -ENXIO;
+ 			goto out_free;
+ 		}
diff --git a/SOURCES/4007-acpi-add-support-for-extended-IRQ-to-PCI-link.patch b/SOURCES/4007-acpi-add-support-for-extended-IRQ-to-PCI-link.patch
new file mode 100644
index 0000000..2bbb6ad
--- /dev/null
+++ b/SOURCES/4007-acpi-add-support-for-extended-IRQ-to-PCI-link.patch
@@ -0,0 +1,113 @@
+From: Sinan Kaya <okaya at codeaurora.org>
+Date: Mon, 14 Apr 2014 17:48:54 -0500
+Subject: acpi: add support for extended IRQ to PCI link
+
+The ACPI compiler uses the extended format when
+used interrupt numbers are greater than 256.
+The PCI link code currently only supports simple
+interrupt format. The IRQ numbers are represented
+using 32 bits when extended IRQ syntax. This patch
+changes the interrupt number type to 32 bits and
+places an upper limit of 512 as possible interrupt
+id. Additional checks have been placed to prevent
+out of bounds writes.
+
+Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
+---
+ drivers/acpi/pci_link.c | 39 +++++++++++++++++++++++++--------------
+ 1 file changed, 25 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
+index cfd7581..422f5d2 100644
+--- a/drivers/acpi/pci_link.c
++++ b/drivers/acpi/pci_link.c
+@@ -1,6 +1,7 @@
+ /*
+  *  pci_link.c - ACPI PCI Interrupt Link Device Driver ($Revision: 34 $)
+  *
++ *  Copyright (c) 2014, The Linux Foundation. All rights reserved.
+  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover at intel.com>
+  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh at intel.com>
+  *  Copyright (C) 2002       Dominik Brodowski <devel at brodo.de>
+@@ -71,12 +72,12 @@ static struct acpi_scan_handler pci_link_handler = {
+  * later even the link is disable. Instead, we just repick the active irq
+  */
+ struct acpi_pci_link_irq {
+-	u8 active;		/* Current IRQ */
++	u32 active;		/* Current IRQ */
+ 	u8 triggering;		/* All IRQs */
+ 	u8 polarity;		/* All IRQs */
+ 	u8 resource_type;
+ 	u8 possible_count;
+-	u8 possible[ACPI_PCI_LINK_MAX_POSSIBLE];
++	u32 possible[ACPI_PCI_LINK_MAX_POSSIBLE];
+ 	u8 initialized:1;
+ 	u8 reserved:7;
+ };
+@@ -441,7 +442,7 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
+  * enabled system.
+  */
+ 
+-#define ACPI_MAX_IRQS		256
++#define ACPI_MAX_IRQS		512
+ #define ACPI_MAX_ISA_IRQ	16
+ 
+ #define PIRQ_PENALTY_PCI_AVAILABLE	(0)
+@@ -497,13 +498,16 @@ int __init acpi_irq_penalty_init(void)
+ 					    penalty;
+ 			}
+ 
+-		} else if (link->irq.active) {
++		} else if (link->irq.active &&
++			(link->irq.active < ACPI_MAX_IRQS)) {
+ 			acpi_irq_penalty[link->irq.active] +=
+ 			    PIRQ_PENALTY_PCI_POSSIBLE;
+ 		}
+ 	}
+ 	/* Add a penalty for the SCI */
+-	acpi_irq_penalty[acpi_gbl_FADT.sci_interrupt] += PIRQ_PENALTY_PCI_USING;
++	if (acpi_gbl_FADT.sci_interrupt < ACPI_MAX_IRQS)
++		acpi_irq_penalty[acpi_gbl_FADT.sci_interrupt] +=
++			PIRQ_PENALTY_PCI_USING;
+ 	return 0;
+ }
+ 
+@@ -547,14 +551,19 @@ static int acpi_pci_link_allocate(struct acpi_pci_link *link)
+ 		irq = link->irq.possible[link->irq.possible_count - 1];
+ 
+ 	if (acpi_irq_balance || !link->irq.active) {
+-		/*
+-		 * Select the best IRQ.  This is done in reverse to promote
+-		 * the use of IRQs 9, 10, 11, and >15.
+-		 */
+-		for (i = (link->irq.possible_count - 1); i >= 0; i--) {
+-			if (acpi_irq_penalty[irq] >
+-			    acpi_irq_penalty[link->irq.possible[i]])
+-				irq = link->irq.possible[i];
++
++		if (irq < ACPI_MAX_IRQS) {
++			/*
++			 * Select the best IRQ.  This is done in reverse to
++			 * promote the use of IRQs 9, 10, 11, and >15.
++			 */
++			for (i = (link->irq.possible_count - 1); i >= 0;
++				i--) {
++				if ((link->irq.possible[i] < ACPI_MAX_IRQS) &&
++				    (acpi_irq_penalty[irq] >
++				    acpi_irq_penalty[link->irq.possible[i]]))
++					irq = link->irq.possible[i];
++			}
+ 		}
+ 	}
+ 
+@@ -566,7 +575,9 @@ static int acpi_pci_link_allocate(struct acpi_pci_link *link)
+ 			    acpi_device_bid(link->device));
+ 		return -ENODEV;
+ 	} else {
+-		acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING;
++		if (link->irq.active < ACPI_MAX_IRQS)
++			acpi_irq_penalty[link->irq.active] +=
++				PIRQ_PENALTY_PCI_USING;
+ 		printk(KERN_WARNING PREFIX "%s [%s] enabled at IRQ %d\n",
+ 		       acpi_device_name(link->device),
+ 		       acpi_device_bid(link->device), link->irq.active);
diff --git a/SOURCES/4008-irqchip-gic-v3-ACPI-Add-redistributor-support-via-GI.patch b/SOURCES/4008-irqchip-gic-v3-ACPI-Add-redistributor-support-via-GI.patch
new file mode 100644
index 0000000..f6b8c2c
--- /dev/null
+++ b/SOURCES/4008-irqchip-gic-v3-ACPI-Add-redistributor-support-via-GI.patch
@@ -0,0 +1,68 @@
+From: Tomasz Nowicki <tn at semihalf.com>
+Date: Tue, 19 Jan 2016 14:11:16 +0100
+Subject: irqchip/gic-v3: ACPI: Add redistributor support via GICC structures
+
+Following ACPI spec:
+On systems supporting GICv3 and above, GICR Base Address in MADT GICC
+structure holds the 64-bit physical address of the associated Redistributor.
+If all of the GIC Redistributors are in the always-on power domain,
+GICR structures should be used to describe the Redistributors instead,
+and this field must be set to 0.
+
+It means that we have two ways to initialize registirbutors map.
+1. via GICD structure which can accommodate many redistributors as a region
+2. via GICC which is able to describe single redistributor
+
+This patch is going to add support for second option.
+Considering redistributors, GICD and GICC subtables have be mutually
+exclusive. While discovering and mapping redistributor, we need to know
+its size in advance. For the GICC case, redistributor can be in
+a power-domain that is off, thus we cannot relay on GICR TYPER register.
+Therefore, we get GIC version from distributor register and map 2xSZ_64K
+for GICv3. [While the upstream version of this patch includes support for
+GICv4, this backport omits it for simplicity.]
+
+Acked-by: Marc Zyngier <marc.zyngier at arm.com>
+Signed-off-by: Hanjun Guo <hanjun.guo at linaro.org>
+Signed-off-by: Tomasz Nowicki <tn at semihalf.com>
+Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
+
+Git-commit: b70fb7af67158250bf16db467926e6e105d8bc49
+Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+[cov at codeaurora.org: Backport GICv3 essentials to CentOS 7.2]
+Signed-off-by: Christopher Covington <cov at codeaurora.org>
+---
+ drivers/irqchip/irq-gic-v3.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
+index f729b97..cf75d81 100644
+--- a/drivers/irqchip/irq-gic-v3.c
++++ b/drivers/irqchip/irq-gic-v3.c
+@@ -49,6 +49,7 @@ struct gic_chip_data {
+ 	u64			redist_stride;
+ 	u32			nr_redist_regions;
+ 	unsigned int		irq_nr;
++	bool			single_redist;
+ };
+ 
+ static struct gic_chip_data gic_data __read_mostly;
+@@ -453,6 +454,9 @@ static int gic_populate_rdist(void)
+ 				return 0;
+ 			}
+ 
++			if (gic_data.single_redist)
++				break;
++
+ 			if (gic_data.redist_stride) {
+ 				ptr += gic_data.redist_stride;
+ 			} else {
+@@ -1092,7 +1096,7 @@ gic_v3_acpi_init(struct acpi_table_header *table, struct irq_domain **domain)
+ 			gic_acpi_parse_madt_redist, table,
+ 			ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR, 0);
+ 	if (!count)
+-		pr_info("No valid GICR entries exist\n");
++		gic_data.single_redist = true;
+ 	else if (count < 0) {
+ 		pr_err("Error during GICR entries parsing\n");
+ 		err = -EINVAL;
diff --git a/SPECS/kernel-aarch64.spec b/SPECS/kernel-aarch64.spec
index ad66cd6..52ee2d1 100644
--- a/SPECS/kernel-aarch64.spec
+++ b/SPECS/kernel-aarch64.spec
@@ -12,7 +12,7 @@ Summary: The Linux kernel
 
 %define rpmversion 4.2.0
 %define pkgrelease 0.21.el7
-%define centupdate 0.27.el7
+%define centupdate 0.28.el7
 
 # allow pkg_release to have configurable %{?dist} tag
 %define specrelease %%SPECRELEASE%%
@@ -344,6 +344,16 @@ Patch2000: KEYS-Fix-keyring-ref-leak-in-join_session_keyring.patch
 # NXP Patches
 Patch3001: NXP-Layerscape-support.patch
 
+# QDF2432 Patches
+Patch4001: 4001-tty-amba-pl011-add-register-accessor-functions.patch
+Patch4002: 4002-tty-amba-pl011-convert-accessor-functions-to-take-ua.patch
+Patch4003: 4003-tty-amba-pl011-add-support-for-32-bit-register-acces.patch
+Patch4004: 4004-tty-amba-pl011-use-iotype-instead-of-access_32b-to-t.patch
+Patch4005: 4005-tty-amba-pl011-Use-32-bit-accesses-for-SBSA-UART.patch
+Patch4006: 4006-irqchip-Fully-support-ACPI-GICv3-ITS.patch
+Patch4007: 4007-acpi-add-support-for-extended-IRQ-to-PCI-link.patch
+Patch4008: 4008-irqchip-gic-v3-ACPI-Add-redistributor-support-via-GI.patch
+
 # empty final patch to facilitate testing of kernel patches
 Patch999999: linux-kernel-test.patch
 
@@ -693,6 +703,16 @@ git am %{PATCH2000}
 # Apply NXP patches
 git am %{PATCH3001}
 
+# Apply QDF2432 patches
+git am %{PATCH4001}
+git am %{PATCH4002}
+git am %{PATCH4003}
+git am %{PATCH4004}
+git am %{PATCH4005}
+git am %{PATCH4006}
+git am %{PATCH4007}
+git am %{PATCH4008}
+
 # Any further pre-build tree manipulations happen here.
 
 chmod +x scripts/checkpatch.pl
@@ -1458,6 +1478,9 @@ fi
 %kernel_variant_files %{with_debug} kernel-debug debug
 
 %changelog
+* Mon May 09 2016 Christopher Covington <cov at codeaurora.org> [4.2.0-0.28.el7]
+- Initial QDF2432 support
+
 * Tue Mar 22 2016 Jim Perrin <jperrin at centos.org> [4.2.0-0.27.el7]
 - Initial NXP support
 
-- 
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project



More information about the Arm-dev mailing list