[Arm-dev] owncloud on armv7hl

Nicolas Repentin nicolas at shivaserv.fr
Wed Aug 9 11:24:27 UTC 2017


Hi ;)

If you wan, you can add the following repo file with wget to
/etc/yum.repos.d/

http://repo.shivaserv.fr/centos/7/shivaserv-various.repo

It's my own repo, I've put php70w on it ;)

The upload is not very big (above 6Mbits/s), but packages are not big.


If it works I can tell you how to compile.



Le 07/08/2017 à 22:01, Robert Moskowitz a écrit :
> Much appreciated.  Do I erase the php 5.4 I installed?
>
> On 08/07/2017 03:58 PM, Nicolas Repentin wrote:
>> I will check tomorrow if i can try to compile some php7 packages and
>> if it works i will give it to you.
>> I just need to restart my pi2 on centos :p
>>
>>
>> Le 7 août 2017 21:56:14 GMT+02:00, Robert Moskowitz
>> <rgm at htt-consult.com> a écrit :
>>
>>
>>
>>     On 08/07/2017 03:53 PM, Nicolas Repentin wrote:
>>>     I got my packages for amd64 from webtatic :
>>>     https://mirror.webtatic.com/yum/el7/
>>>
>>>     They provides srpm packages, maybe you can compil arm version
>>>     from srpm with rpmbuild.. i've done it a lot for other packages
>>>     (http://repo.shivaserv.fr)
>>
>>     And you are a better one than I.  Pretty much any time I try for
>>     an rpmbuild it is a bit of a disaster.
>>
>>     If I don't get some reasonable answers, I will punt over to F26
>>     for my cloud work for now.
>>
>>>
>>>
>>>     Le 7 août 2017 21:41:23 GMT+02:00, Robert Moskowitz
>>>     <rgm at htt-consult.com> a écrit :
>>>
>>>         It wasn't until F21 that there were standard build process
>>>         for Fedora-arm.  From 18 - 20, they were all custom builds. 
>>>         And F20:
>>>
>>>         http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/20/Everything/armhfp/os/Packages/p/
>>>
>>>         Has php 5.5
>>>
>>>         I just went looking for Centos 7.4, but
>>>         http://mirror.centos.org/centos/ only has to 7.3...
>>>
>>>         Bob
>>>
>>>         On 08/07/2017 02:17 PM, Nicolas Repentin wrote:
>>>>         I don't know :s does the arm package exists on f19 ? I
>>>>         think centos 7 is based on f19.
>>>>
>>>>
>>>>
>>>>         Le 7 août 2017 19:42:29 GMT+02:00, Robert Moskowitz
>>>>         <rgm at htt-consult.com> a écrit :
>>>>
>>>>
>>>>
>>>>             On 08/07/2017 01:27 PM, Nicolas Repentin wrote:
>>>>>             Oh, yes
>>>>>             On my amd64 centos i have added php70 from another
>>>>>             repo. Maybe try to check if there is the same for arm?
>>>>
>>>>             I suspect I could get it from a Fedora-arm repo, but
>>>>             other than being compiled on armv7hl, will it cause
>>>>             other problems with components?
>>>>
>>>>             I see that F26 has php 7.1:
>>>>
>>>>             http://mirrors.kernel.org/fedora/releases/26/Server/armhfp/os/Packages/p/
>>>>
>>>>             But is ok to install this?  What other challenges might
>>>>             it cause?
>>>>
>>>>>
>>>>>
>>>>>
>>>>>             Le 7 août 2017 19:22:09 GMT+02:00, Robert Moskowitz
>>>>>             <rgm at htt-consult.com> a écrit :
>>>>>
>>>>>                 On 08/06/2017 02:40 PM, Nicolas Repentin wrote:
>>>>>
>>>>>                     Hi Don't bother with the package, install a
>>>>>                     web and database server, and install owncloud
>>>>>                     or nextcloud directly with the tar.gz from the
>>>>>                     site. It will be easier, and you will be able
>>>>>                     to update easily from the web interface to the
>>>>>                     futures versions after. 
>>>>>
>>>>>
>>>>>
>>>>>                 nextcloud needs PHP7 not the PHP5.4 in Centos7.
>>>>>
>>>>>                 At 
>>>>>                 https://docs.nextcloud.com/server/11/admin_manual/installation/php_55_installation.html
>>>>>
>>>>>                 It says that Nextcloud 11 supports 5.4, but recommends 5.5 and how to 
>>>>>                 get it from the SCL library.  Is this working for armv7hl?
>>>>>
>>>>>                 Nextcloud 12 requires php 5.6.
>>>>>
>>>>>                 Ouch.
>>>>>
>>>>>                 Bob
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>             -- 
>>>>>             Nicolas 
>>>>
>>>>
>>>>         -- 
>>>>         Nicolas 
>>>
>>>
>>>     -- 
>>>     Nicolas 
>>
>>
>> -- 
>> Nicolas 
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20170809/8be6cd1e/attachment.html>


More information about the Arm-dev mailing list