Hi Fabian, Thanks for your recommendations. I will study it. The final goal is that I need to develop a CentOS BSP for our in-house custom board which run on MT7623A Soc. As I do not have that board now so I reuse my wanboard as preparation steps. Thanks, Quan On Thu, Aug 10, 2017 at 4:24 PM, Fabian Arrotin <arrfab at centos.org> wrote: > On 10/08/17 05:43, Cao Duc Quan wrote: > > Hi All, > > > > I am quite new to CentOS. > > I have a small project to make CentOS running on iMX.6 quad so I want to > > ask if anyone could hint me to some documents or guidelines to get start > > with it ? > > It seems CentOS use its own build system (not similar to Yocto). > > Any recommendations are highly appreciated. > > > > Thanks > > -- > > Quan Cao > > 0976574864 > > > > What is you final goal ? if you want to see CentOS 7 armhfp running on > it, you should probably first by looking at the kernel : does the > upstream kernel (from kernel.org) supports it ? same for uboot ? if so > chances are pretty high that there is nothing to do. > > Can you give more details about your plan[s] ? > > BTW, after a 2 minutes google search, I found this : > - > https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation#For_the_ > Wandboard_.28Freescale_i.MX6.29 > > - > https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32#head- > f796aaff2cabd850bde1d5dcc1443c048d68b5aa > > So it seems that it would just work, if you combine both instructions > > Let us know your findings ! > -- > Fabian Arrotin > The CentOS Project | http://www.centos.org > gpg key: 56BEC54E | twitter: @arrfab > > > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > https://lists.centos.org/mailman/listinfo/arm-dev > > -- Quan Cao 0976574864 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20170810/4b6c270f/attachment-0006.html>