[Arm-dev] kernel-generic vs kernel-rpi2

Kristján Valur Jónsson kristjan at rvx.is
Fri Dec 8 14:56:05 UTC 2017


On 8 December 2017 at 12:36, Fabian Arrotin <arrfab at centos.org> wrote:

>
>
> Thanks for the pointer.
> When I built the rpi3 image, I used the existing rpi2 image we had,
> including the config.txt that was used.
>
> From that wiki page, it seems that we're really under what both the
> pi2/p3 can support, including default values.
> Maybe we should at least bump this to "default" values (so not
> overclocking).
> So arm_freq set to 900 for pi2 and 1200 for pi3
>
> Opinions ?
>
> In my opinion, we shuold just leave the arm_freq unset.  The kernel will
choose the correct default.
The hdmi settings are fine.

You could also replace it with the default from the raspbian distro:
https://raw.githubusercontent.com/RPi-Distro/pi-gen/dev/stage1/00-boot-files/files/config.txt


-- 
Kv,
Kristján Valur Jónsson, RVX
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20171208/429252f2/attachment.html>


More information about the Arm-dev mailing list