[Arm-dev] kernel-generic vs kernel-rpi2
Kristján Valur Jónsson
kristjan at rvx.isFri Dec 8 14:56:05 UTC 2017
- Previous message: [Arm-dev] kernel-generic vs kernel-rpi2
- Next message: [Arm-dev] CentOS 7 on Raspberry Pi 3 with motion and the Pi Camera module
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
On 8 December 2017 at 12:36, Fabian Arrotin <arrfab at centos.org> wrote: > > > Thanks for the pointer. > When I built the rpi3 image, I used the existing rpi2 image we had, > including the config.txt that was used. > > From that wiki page, it seems that we're really under what both the > pi2/p3 can support, including default values. > Maybe we should at least bump this to "default" values (so not > overclocking). > So arm_freq set to 900 for pi2 and 1200 for pi3 > > Opinions ? > > In my opinion, we shuold just leave the arm_freq unset. The kernel will choose the correct default. The hdmi settings are fine. You could also replace it with the default from the raspbian distro: https://raw.githubusercontent.com/RPi-Distro/pi-gen/dev/stage1/00-boot-files/files/config.txt -- Kv, Kristján Valur Jónsson, RVX -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20171208/429252f2/attachment-0002.html>
- Previous message: [Arm-dev] kernel-generic vs kernel-rpi2
- Next message: [Arm-dev] CentOS 7 on Raspberry Pi 3 with motion and the Pi Camera module
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Arm-dev mailing list