On 8 December 2017 at 12:36, Fabian Arrotin <arrfab at centos.org> wrote: > > > Thanks for the pointer. > When I built the rpi3 image, I used the existing rpi2 image we had, > including the config.txt that was used. > > From that wiki page, it seems that we're really under what both the > pi2/p3 can support, including default values. > Maybe we should at least bump this to "default" values (so not > overclocking). > So arm_freq set to 900 for pi2 and 1200 for pi3 > > Opinions ? > > In my opinion, we shuold just leave the arm_freq unset. The kernel will choose the correct default. The hdmi settings are fine. You could also replace it with the default from the raspbian distro: https://raw.githubusercontent.com/RPi-Distro/pi-gen/dev/stage1/00-boot-files/files/config.txt -- Kv, Kristján Valur Jónsson, RVX -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20171208/429252f2/attachment-0006.html>