I need to use the SDcard as OS drive, because my HDD is only for external backup, I put it in standby mode most of time to reduce power consumption. The sdcard seems good, i"ve reduce the writes operations by the system on it. How can I force the system to log when freezes? Le 08/05/2017 à 00:26, Robert Moskowitz a écrit : > Could as likely be a problem with the SD card. > > With Cubies, if I only have uboot on the mSD card (no partitions), the > uboot auto switches to the sata drive to load everything. Hans never > got moving the uboot to NAND, but with this setup, I have more > reliable HD than mSD card for booting. > > I have been running solid on 4.9 since it was available. > > On 05/07/2017 05:16 PM, Nicolas Repentin wrote: >> Hi >> >> Thanks. >> >> It's a bpi M1 (http://www.banana-pi.com/eacp_view.asp?id=35). >> >> I'm using it as backup server (got rsnapshot), and secondary mail server >> (postfix, spamassassin). >> >> I got fail2ban and firewalld as well. >> >> The OS and /boot are on a SD card, and the data on an encrypted >> (cryptsetup) hdd on sata port. >> >> I did have modified the extlinux.conf to boot on 4.9. >> >> >> >> Le 07/05/2017 à 23:15, Robert Moskowitz a écrit : >>> Oh, did you replace all THREE lines in /boot/extlinux/extlinux.conf >>> >>> #Created by RootFS Build Factory >>> ui menu.c32 >>> menu autoboot centos >>> menu title centos Options >>> #menu hidden >>> timeout 60 >>> totaltimeout 600 >>> label centos >>> kernel /vmlinuz-4.9.13-203.el7.armv7hl >>> append enforcing=1 >>> root=UUID=ad25a528-baf4-469c-bd12-5276e8f5f9ae >>> fdtdir /dtb-4.9.13-203.el7.armv7hl >>> initrd /initramfs-4.9.13-203.el7.armv7hl.img >>> >>> >>> >>> On 05/07/2017 05:13 PM, Robert Moskowitz wrote: >>>> I am running 4.9.13-203 on all my servers. >>>> >>>> Onlo and Medon are outward facing. Rigel is internal and z9m9z.test >>>> is still in test. >>>> >>>> All are running as well as I can see. All are my base install; Onlo >>>> and Rigel have added BIND and Medon has Apache. z9m9z is my >>>> mailserver. >>>> >>>> I would be interested to know what you have added to the base for >>>> your Bpi. And which Bpi. >>>> >>>> What kind of drive you are using (will the Bpi with its sata boot >>>> from sata like the Cubies?). >>>> >>>> On 05/07/2017 04:52 PM, Nicolas Repentin wrote: >>>>> Hi all, >>>>> >>>>> Does anyone have problems with kernel 4.9 on armv7 devices? >>>>> >>>>> I'm using bananapi M1, and on kernel 4.2 (from original centos 7 >>>>> image), >>>>> works very well. >>>>> I've tried the latest 4.9, and I take freezes some minutes after >>>>> boot. >>>>> >>>>> I just had a "kernel:Internal error: Oops - BUG: 0 [#1] SMP ARM" on >>>>> prompt before freeze. Thanks to watchdog to have reset the Bpi >>>>> (it's at >>>>> 350km to me :p). >>>>> >>>>> I don't have actually more logs... and I have to rollback to 4.2. >>>>> >>>>> >>>>> Any feedback on this 4.9 kernel? >>>>> >>>>> Thanks >>>>> >>>>> _______________________________________________ >>>>> Arm-dev mailing list >>>>> Arm-dev at centos.org >>>>> https://lists.centos.org/mailman/listinfo/arm-dev >>>>> >>>> _______________________________________________ >>>> Arm-dev mailing list >>>> Arm-dev at centos.org >>>> https://lists.centos.org/mailman/listinfo/arm-dev >>>> >>> _______________________________________________ >>> Arm-dev mailing list >>> Arm-dev at centos.org >>> https://lists.centos.org/mailman/listinfo/arm-dev >> _______________________________________________ >> Arm-dev mailing list >> Arm-dev at centos.org >> https://lists.centos.org/mailman/listinfo/arm-dev > > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > https://lists.centos.org/mailman/listinfo/arm-dev