[Arm-dev] thunderx support patch
Jim Perrin
jperrin at centos.orgWed Oct 18 14:22:55 UTC 2017
- Previous message: [Arm-dev] thunderx support patch
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Sure. I'll review and see about getting this out.
On 10/18/2017 04:01 PM, Lomovtsev, Vadim wrote:
> Hi Jim,
>
> Could you please apply attached patches on top of 4.11.0-22.el7 and issue CentOS kernel update?
> I believe when RHEL 7.4 will be released CentOS will switch onto it's kernel we probably will need to rework this list...
>
> Following config options expected to be set to 'y':
> CONFIG_ACPI_APEI_SEA=y
> CONFIG_HIST_TRIGGERS=y
>
> WBR,
> Vadim
>
> ----
>
> Patches agenda is following:
>
> Andi Kleen (2):
> perf xyarray: Save max_x, max_y
> perf evsel: Fix buffer overflow while freeing events
>
> Ard Biesheuvel (2):
> fs/proc: kcore: use kcore_list type to check for vmalloc/module
> address
> arm64: mm: select CONFIG_ARCH_PROC_KCORE_TEXT
>
> Bob Moore (1):
> ACPICA: Add support for new SRAT subtable
>
> David Daney (2):
> PCI: Mark Cavium CN8xxx to avoid bus reset
> PCI: Avoid bus reset if bridge itself is broken
>
> Eric Biggers (3):
> KEYS: fix dereferencing NULL payload with nonzero length
> KEYS: fix freeing uninitialized memory in key_update()
> KEYS: encrypted: avoid encrypting/decrypting stack buffers
>
> Ganapatrao Kulkarni (8):
> ACPICA: iasl: Update to IORT SMMUv3 disassembling
> ACPI/IORT: numa: Add numa node mapping for smmuv3 devices
> irqchip/gic-v3-its: Add ACPI NUMA node mapping
> arm64: perf: Ignore exclude_hv when kernel is running in HYP
> perf utils: passing pmu as a parameter to function get_cpuid_str
> perf tools arm64: Add support for get_cpuid_str function.
> perf utils: Add helper function is_pmu_core to detect PMU CORE devices
> perf vendor events arm64: Add ThunderX2 implementation defined pmu
> core events
>
> George Cherian (1):
> i2c: xlp9xx: Enable HWMON class probing for xlp9xx
>
> Hu Huajun (1):
> KVM: ARM64: fix phy counter access failure in guest.
>
> Jan Glauber (1):
> PCI: Avoid slot reset if bridge itself is broken
>
> Jan Kara (25):
> fsnotify: Update comments
> fsnotify: Move mark list head from object into dedicated structure
> fsnotify: Remove unnecessary tests when showing fdinfo
> audit: Abstract hash key handling
> audit_tree: Use mark flags to check whether mark is alive
> fsnotify: Move object pointer to fsnotify_mark_connector
> fsnotify: Make fsnotify_mark_connector hold inode reference
> fsnotify: Remove indirection from mark list addition
> fsnotify: Move fsnotify_destroy_marks()
> fsnotify: Move locking into fsnotify_recalc_mask()
> fsnotify: Move locking into fsnotify_find_mark()
> fsnotify: Determine lock in fsnotify_destroy_marks()
> fsnotify: Remove indirection from fsnotify_detach_mark()
> fsnotify: Avoid double locking in fsnotify_detach_from_object()
> fsnotify: Remove useless list deletion and comment
> fsnotify: Lock object list with connector lock
> fsnotify: Free fsnotify_mark_connector when there is no mark attached
> inotify: Remove inode pointers from debug messages
> inotify: Do not drop mark reference under idr_lock
> fsnotify: Move queueing of mark for destruction into
> fsnotify_put_mark()
> fsnotify: Detach mark from object list when last reference is dropped
> fsnotify: Remove special handling of mark destruction on group
> shutdown
> fsnotify: Provide framework for dropping SRCU lock in ->handle_event
> fsnotify: Pass fsnotify_iter_info into handle_event handler
> fanotify: Release SRCU lock when waiting for userspace response
>
> Jayachandran C (10):
> PCI: Add device flag PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT
> PCI: Avoid generating invalid ThunderX2 DMA aliases
> dt-bindings: Add arm64 ARCH_THUNDER2 platform documentation
> arm64: dts: move from ARCH_VULCAN to ARCH_THUNDER2
> MAINTAINERS: Broadcom Vulcan is now Cavium ThunderX2
> tty: amba-pl011: Fix spurious TX interrupts
> ahci: thunderx2: Fix for errata that affects stop engine
> ahci: thunderx2: stop engine fix update
> ACPI / APD: Add clock frequency for ThunderX2 I2C controller
> i2c: xlp9xx: Get clock frequency with clk API
>
> Jiri Olsa (1):
> perf tools: Force uncore events to system wide monitoring
>
> Jonathan (Zhixiong) Zhang (1):
> acpi: apei: panic OS with fatal error status block
>
> Kamlakant Patel (1):
> i2c: xlp9xx: Handle I2C_M_RECV_LEN in msg->flags
>
> Loc Ho (1):
> ACPI: APEI: Enable APEI multiple GHES source to share a single
> external IRQ
>
> Lorenzo Pieralisi (1):
> ARM64/ACPI: Fix BAD_MADT_GICC_ENTRY() macro implementation
>
> Mark Rutland (1):
> arm64: pmuv3: handle pmuv3+
>
> Mark Salter (1):
> ACPI / irq: Fix return code of acpi_gsi_to_irq()
>
> Nate Watterson (1):
> iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range
>
> Robert Richter (1):
> irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA
>
> Robin Murphy (15):
> iommu/dma: Don't reserve PCI I/O windows
> iommu/dma: Handle IOMMU API reserved regions
> iommu/dma: Make PCI window reservation generic
> iommu/dma: Convert to address-based allocation
> iommu/dma: Clean up MSI IOVA allocation
> iommu/dma: Plumb in the per-CPU IOVA caches
> iommu/io-pgtable-arm-v7s: Check table PTEs more precisely
> iommu/io-pgtable-arm: Improve split_blk_unmap
> iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap
> iommu/io-pgtable: Introduce explicit coherency
> iommu/io-pgtable-arm: Support lockless operation
> iommu/io-pgtable-arm-v7s: Support lockless operation
> iommu/arm-smmu: Remove io-pgtable spinlock
> iommu/arm-smmu-v3: Remove io-pgtable spinlock
> iommu/dma: Don't touch invalid iova_domain members
>
> Shiju Jose (1):
> ACPI/APEI: Handle GSIV and GPIO notification types
>
> Tyler Baicar (11):
> acpi: apei: read ack upon ghes record consumption
> ras: acpi/apei: cper: add support for generic data v3 structure
> cper: add timestamp print to CPER status printing
> efi: parse ARM processor error
> arm64: exception: handle Synchronous External Abort
> acpi: apei: handle SEA notification type for ARMv8
> efi: print unrecognized CPER section
> ras: acpi / apei: generate trace event for unrecognized CPER section
> trace, ras: add ARM processor error trace event
> arm/arm64: KVM: add guest SEA support
> acpi: apei: check for pending errors when probing GHES entries
>
> Vadim Lomovtsev (2):
> EDAC, thunderx: Fix a warning during l2c debugfs node creation
> PCI: quirks: update Cavium ThunderX ACS quirk implementation
>
> .../devicetree/bindings/arm/cavium-thunder2.txt | 8 +
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> MAINTAINERS | 9 +-
> arch/arm/include/asm/kvm_arm.h | 10 +
> arch/arm/include/asm/system_misc.h | 5 +
> arch/arm64/Kconfig | 5 +
> arch/arm64/boot/dts/broadcom/Makefile | 1 -
> arch/arm64/boot/dts/cavium/Makefile | 1 +
> .../vulcan-eval.dts => cavium/thunder2-99xx.dts} | 9 +-
> .../vulcan.dtsi => cavium/thunder2-99xx.dtsi} | 15 +-
> arch/arm64/include/asm/acpi.h | 6 +-
> arch/arm64/include/asm/esr.h | 1 +
> arch/arm64/include/asm/kvm_arm.h | 10 +
> arch/arm64/include/asm/system_misc.h | 2 +
> arch/arm64/kernel/perf_event.c | 30 +-
> arch/arm64/mm/fault.c | 80 ++-
> drivers/acpi/acpi_apd.c | 6 +
> drivers/acpi/apei/Kconfig | 15 +
> drivers/acpi/apei/ghes.c | 260 +++++++--
> drivers/acpi/apei/hest.c | 7 +-
> drivers/acpi/arm64/iort.c | 29 +-
> drivers/acpi/irq.c | 4 +-
> drivers/ata/libahci.c | 18 +-
> drivers/edac/thunderx_edac.c | 2 +-
> drivers/firmware/efi/cper.c | 204 +++++++-
> drivers/i2c/busses/i2c-xlp9xx.c | 45 +-
> drivers/iommu/arm-smmu-v3.c | 38 +-
> drivers/iommu/arm-smmu.c | 50 +-
> drivers/iommu/dma-iommu.c | 290 ++++++----
> drivers/iommu/io-pgtable-arm-v7s.c | 177 ++++---
> drivers/iommu/io-pgtable-arm.c | 185 ++++---
> drivers/iommu/io-pgtable.h | 6 +
> drivers/iommu/iova.c | 2 +-
> drivers/irqchip/irq-gic-v3-its.c | 76 ++-
> drivers/pci/pci.c | 8 +
> drivers/pci/quirks.c | 50 +-
> drivers/pci/search.c | 7 +-
> drivers/ras/ras.c | 15 +
> drivers/tty/serial/amba-pl011.c | 23 +-
> fs/inode.c | 3 -
> fs/mount.h | 2 +-
> fs/namespace.c | 3 -
> fs/notify/dnotify/dnotify.c | 6 +-
> fs/notify/fanotify/fanotify.c | 20 +-
> fs/notify/fdinfo.c | 16 +-
> fs/notify/fsnotify.c | 50 +-
> fs/notify/fsnotify.h | 48 +-
> fs/notify/group.c | 11 +-
> fs/notify/inode_mark.c | 94 +---
> fs/notify/inotify/inotify.h | 3 +-
> fs/notify/inotify/inotify_fsnotify.c | 7 +-
> fs/notify/inotify/inotify_user.c | 54 +-
> fs/notify/mark.c | 582 +++++++++++++++------
> fs/notify/vfsmount_mark.c | 62 +--
> fs/proc/kcore.c | 2 +-
> include/acpi/actbl1.h | 12 +-
> include/acpi/actbl2.h | 4 +
> include/acpi/ghes.h | 48 +-
> include/linux/cper.h | 54 ++
> include/linux/dma-iommu.h | 5 +
> include/linux/fs.h | 4 +-
> include/linux/fsnotify_backend.h | 51 +-
> include/linux/pci.h | 2 +
> include/linux/ras.h | 17 +
> include/ras/ras_event.h | 90 ++++
> include/uapi/linux/uuid.h | 6 +-
> kernel/audit_fsnotify.c | 3 +-
> kernel/audit_tree.c | 66 ++-
> kernel/audit_watch.c | 3 +-
> kernel/auditsc.c | 5 +-
> security/keys/encrypted-keys/encrypted.c | 17 +-
> security/keys/key.c | 5 +-
> security/keys/keyctl.c | 4 +-
> tools/perf/arch/arm64/util/Build | 1 +
> tools/perf/arch/arm64/util/header.c | 60 +++
> tools/perf/arch/powerpc/util/header.c | 2 +-
> tools/perf/arch/x86/util/header.c | 2 +-
> tools/perf/builtin-stat.c | 33 +-
> tools/perf/pmu-events/arch/arm64/mapfile.csv | 15 +
> .../arm64/thunderx2/implementation-defined.json | 62 +++
> tools/perf/tests/openat-syscall-all-cpus.c | 2 +-
> tools/perf/tests/openat-syscall.c | 2 +-
> tools/perf/util/evlist.c | 12 +-
> tools/perf/util/evsel.c | 37 +-
> tools/perf/util/evsel.h | 7 +-
> tools/perf/util/header.h | 3 +-
> tools/perf/util/parse-events.c | 5 +-
> tools/perf/util/pmu.c | 48 +-
> tools/perf/util/xyarray.c | 2 +
> tools/perf/util/xyarray.h | 12 +
> virt/kvm/arm/arm.c | 4 +-
> virt/kvm/arm/mmu.c | 36 +-
> 92 files changed, 2443 insertions(+), 971 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/cavium-thunder2.txt
> rename arch/arm64/boot/dts/{broadcom/vulcan-eval.dts => cavium/thunder2-99xx.dts} (72%)
> rename arch/arm64/boot/dts/{broadcom/vulcan.dtsi => cavium/thunder2-99xx.dtsi} (88%)
> create mode 100644 tools/perf/arch/arm64/util/header.c
> create mode 100644 tools/perf/pmu-events/arch/arm64/mapfile.csv
> create mode 100644 tools/perf/pmu-events/arch/arm64/thunderx2/implementation-defined.json
>
>
>
> _______________________________________________
> Arm-dev mailing list
> Arm-dev at centos.org
> https://lists.centos.org/mailman/listinfo/arm-dev
>
--
Jim Perrin
The CentOS Project | http://www.centos.org
twitter: @BitIntegrity | GPG Key: FA09AD77
- Previous message: [Arm-dev] thunderx support patch
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Arm-dev mailing list