Sorry, but - if I understood the problem ...
I have about 4 Rasp Pi 3 Model B - and in all of them. ... works fine ...
in the eth0 and wlan0 connections
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.40 netmask 255.255.255.0 broadcast 192.168.1.255
ether b8:27:eb:c4:8f:2d txqueuelen 1000 (Ethernet)
RX packets 540081 bytes 57077211 (54.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 31777 bytes 2439659 (2.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
This running RB ... I do not activate the WLan - but in the tests it works
fine
wlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether ce:5d:d4:34:33:7d txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
2017-09-01 9:37 GMT-03:00 Binary Buddha <the.binary.buddha at gmail.com>:
> Reference: https://wiki.centos.org/SpecialInterestGroup/AltArch/
> Arm32#head-6c398ac6c18c92aca61ac974866636e43c48d2eb
>
> Yeah, eth0 and wlan0 doesn’t seem to be working with
> CentOS-Userland-7-armv7hl-Minimal-1611-RaspberryPi3.
>
> eth0 doesn’t seem to exist in /dev even though there’s a network script
> for it. It’s not pulling DHCP and ifconfig static ip config also doesn’t
> work.
>
> I did the /root/README thing via thumb drive and wlan0 doesn’t work when
> doing the wpa_supplicant method. Also iw isn’t installed to aid in making
> it easier.
>
>
> Binary Buddha
> the.binary.buddha at gmail.com
> thebinarybuddha.com
>
> PGP/GPG Public Key: https://sks-keyservers.net/pks/lookup?op=get&search=
> 0x8D59CF094187D78D
>
>
> _______________________________________________
> Arm-dev mailing list
> Arm-dev at centos.org
> https://lists.centos.org/mailman/listinfo/arm-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20170901/18cb8054/attachment-0006.html>