Fabian, I've added such new repo and installed the 'raspberrypi-vc-utils' and 'raspberrypi-vc-libs' packages successfully. The command 'vcgencmd' seems working fine. It shows the temperature and other values of my Raspberry Pi v3: [root at rpi3 ~]# vcgencmd measure_temp temp=51.0'C [root at rpi3 ~]# for src in arm core h264 isp v3d uart pwm emmc pixel vec hdmi dpi ; do echo -e "$src:\t$(vcgencmd measure_clock $src)" ; done arm: frequency(45)=600000000 core: frequency(1)=250000000 h264: frequency(28)=250000000 isp: frequency(42)=250000000 v3d: frequency(43)=250000000 uart: frequency(22)=48000000 pwm: frequency(25)=0 emmc: frequency(47)=250000000 pixel: frequency(29)=65000000 vec: frequency(10)=0 hdmi: frequency(9)=163683000 dpi: frequency(4)=0 [root at rpi3 ~]# for id in core sdram_c sdram_i sdram_p ; do echo -e "$id:\t$(vcgencmd measure_volts $id)" ; done core: volt=1.2000V sdram_c: volt=1.2000V sdram_i: volt=1.2000V sdram_p: volt=1.2250V [root at rpi3 ~]# for codec in H264 MPG2 WVC1 MPG4 MJPG WMV9 ; do echo -e "$codec:\t$(vcgencmd codec_enabled $codec)" ; done H264: H264=enabled MPG2: MPG2=disabled WVC1: WVC1=disabled MPG4: MPG4=enabled MJPG: MJPG=enabled WMV9: WMV9=disabled ... and more. Please refer here <http://www.elinux.org/RPI_vcgencmd_usage> for a list of possible commands. Thanks for building that package! Regards. On 09/12/2017 05:57 PM, Fabian Arrotin wrote: [...] > > So if you want to test this, both landed in > https://armv7.dev.centos.org/repodir/c7-extras-1/ repo (unsigned, etc) > > Depending on feedback and also reviews, we can push that pkg soon in > official centos 7 armhfp repositories > > -- Jordi Sanfeliu FIBRANET Network Services Provider http://www.fibranet.cat