[Arm-dev] Cubieboard5 performance

[arm_ml at rirasoft.de]

Am 2018-08-09 16:57, schrieb Robert Moskowitz:
> On 08/09/2018 10:31 AM, arm_ml at rirasoft.de wrote:
>> Am 2018-08-09 13:58, schrieb Robert Moskowitz:
>>> On 08/09/2018 07:34 AM, arm_ml at rirasoft.de wrote:
>>>> Am 2018-08-07 12:23, schrieb Pablo Sebastián Greco:
>>>>> <snip>
snip
>> 
>> 
>> Okay, I give CentOs on this device a try. What have I done:
>> 1. write Fedora-Minimal-armhfp-Rawhide-20180802.n.0-sda.raw.xz on the 
>> SD-card
>> 2. delete all 4 partions
>> 3. mount CentOS-Userland-7-armv7hl-Minimal-1611-CubieTruck.img as loop 
>> device
>> 4. create 3 new partions on SD-Card (same size as CentOS-Image)
>> 5. copy 1. and 3. partion from CentOS to SD-Card
>> 6. copy sun8i-a83t-cubietruck-plus.dtb From Fedora to 
>> /mnt/SDCard/1/dtb-4.4.34-201.el7.armv7hl/
>> 7. boot from SD-Card
>> 
>> boot log:
>> U-Boot SPL 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000)
>> DRAM: 2048 MiB
>> Trying to boot from MMC1
>> 
>> 
>> U-Boot 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) Allwinner Technology
> 
> OK.  You are using the latest uboot.  Centos build only has 2018.03
> 
> Another way is to copy the uboot from Fedora:
> 
> /usr/share/uboot/Cubietruck_plus/
> 
> and dd that onto the Centos 1804 image (why are you using the old 1611
> image?  There were problems with it an Cubietruck+ as I recall).

I'm using CentOS-Userland-7-armv7hl-Minimal-1611-CubieTruck.img.xz 
because of the CubieTruck in the name. With the 
CentOS-Userland-7-armv7hl-generic-Minimal-1804-sda.raw.xz the boot 
process complains about missing vmlinuz-4.14.28-201.el7.centos.armv7hl
> 
> Boot this and see what it does.  If it fails, then copy the dtb from 
> Fedora:
> 
> /usr/lib/modules/4.18.0-0.rc8.git0.1.fc29.armv7hl/dtb/sun8i-a83t-cubietruck-plus.dtb
> 
>> 
>> CPU:   Allwinner A83T (SUN8I 1673)
>> Model: Cubietech Cubietruck Plus
>> I2C:   ready
>> DRAM:  2 GiB
>> MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
>> Loading Environment from FAT... *** Warning - bad CRC, using default 
>> environment
>> 
>> Failed (-5)
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   No ethernet found.
>> starting USB...
>> USB0:   failed to get usb PHY
>> Port not available.
>> USB1:   failed to get usb at 01c1a000 usb PHY
>> Port not available.
>> USB2:   failed to get usb at 01c1b000 usb PHY
>> Port not available.
>> Hit any key to stop autoboot:  0
>> switch to partitions #0, OK
>> mmc0 is current device
>> Scanning mmc 0:1...
>> Found /extlinux/extlinux.conf
>> Retrieving file: /extlinux/extlinux.conf
>> 336 bytes read in 13 ms (24.4 KiB/s)
>> Ignoring unknown command: ui
>> Ignoring malformed menu command:  autoboot
>> Ignoring unknown command: totaltimeout
>> centos Options
>> 1:      centos
>> Enter choice: 1:        centos
>> Retrieving file: /initramfs-4.4.34-201.el7.armv7hl.img
>> 35020663 bytes read in 22174 ms (1.5 MiB/s)
>> Retrieving file: /vmlinuz-4.4.34-201.el7.armv7hl
>> 6051744 bytes read in 620 ms (9.3 MiB/s)
>> append: enforcing=0 root=UUID=ad25a528-baf4-469c-bd12-5276e8f5f9ae
>> Retrieving file: 
>> /dtb-4.4.34-201.el7.armv7hl/sun8i-a83t-cubietruck-plus.dtb
>> 548864 bytes read in 260 ms (2 MiB/s)
>> ERROR: Did not find a cmdline Flattened Device Tree
>> Could not find a valid device tree
>> SCRIPT FAILED: continuing...
>> Found U-Boot script /boot.scr
>> 2 bytes read in 12 ms (0 Bytes/s)
>> ## Executing script at 43100000
>> Wrong image format for "source" command
>> SCRIPT FAILED: continuing...
>> switch to partitions #0, OK
>> mmc1(part 0) is current device
>> Scanning mmc 1:1...
>> starting USB...
>> USB0:   failed to get usb PHY
>> Port not available.
>> USB1:   failed to get usb at 01c1a000 usb PHY
>> Port not available.
>> USB2:   failed to get usb at 01c1b000 usb PHY
>> Port not available.
>> USB is stopped. Please issue 'usb start' first.
>> starting USB...
>> USB0:   failed to get usb PHY
>> Port not available.
>> USB1:   failed to get usb at 01c1a000 usb PHY
>> Port not available.
>> USB2:   failed to get usb at 01c1b000 usb PHY
>> Port not available.
>> No ethernet found.
>> missing environment variable: pxeuuid
>> Retrieving file: /extlinux/pxelinux.cfg/00000000
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/0000000
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/000000
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/00000
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/0000
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/000
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/00
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/0
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/default-arm-sunxi
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/default-arm
>> No ethernet found.
>> Retrieving file: /extlinux/pxelinux.cfg/default
>> No ethernet found.
>> Config file not found
>> starting USB...
>> USB0:   failed to get usb PHY
>> Port not available.
>> USB1:   failed to get usb at 01c1a000 usb PHY
>> Port not available.
>> USB2:   failed to get usb at 01c1b000 usb PHY
>> Port not available.
>> No ethernet found.
>> No ethernet found
>> 
>> Greetings
>> Andreas
>> 

Andreas