[Arm-dev] Cubieboard5 performance
arm_ml at rirasoft.de
arm_ml at rirasoft.de
Fri Aug 10 12:17:00 UTC 2018
Am 2018-08-09 17:31, schrieb Robert Moskowitz:
> On 08/09/2018 11:21 AM, arm_ml at rirasoft.de wrote:
>> Am 2018-08-09 16:57, schrieb Robert Moskowitz:
>>> On 08/09/2018 10:31 AM, arm_ml at rirasoft.de wrote:
>>>> Am 2018-08-09 13:58, schrieb Robert Moskowitz:
>>>>> On 08/09/2018 07:34 AM, arm_ml at rirasoft.de wrote:
>>>>>> Am 2018-08-07 12:23, schrieb Pablo Sebastián Greco:
>>>>>>> <snip>
>> snip
Wow, I can boot it, but I can't login and can't install the kernel from
Pablo. Whats next?
U-Boot SPL 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
U-Boot 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) Allwinner Technology
CPU: Allwinner A83T (SUN8I 1673)
Model: Cubietech Cubietruck Plus
I2C: ready
DRAM: 2 GiB
MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
Loading Environment from FAT... *** Warning - bad CRC, using default
environment
Failed (-5)
In: serial
Out: serial
Err: serial
Net: No ethernet found.
starting USB...
USB0: failed to get usb PHY
Port not available.
USB1: failed to get usb at 01c1a000 usb PHY
Port not available.
USB2: failed to get usb at 01c1b000 usb PHY
Port not available.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
857 bytes read in 16 ms (51.8 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
CentOS-Userland-7-armv7hl-generic-Minimal-1804 Boot Options.
1: CentOS-Userland-7-armv7hl-generic-Minimal-1804
(4.14.28-201.el7.centos.armv7hl)
2: single
Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-1804
(4.14.28-201.el7.centos.armv7hl)
Retrieving file: /initramfs-4.14.28-201.el7.centos.armv7hl.img
42665567 bytes read in 11495 ms (3.5 MiB/s)
Retrieving file: /vmlinuz-4.14.28-201.el7.centos.armv7hl
6627840 bytes read in 682 ms (9.3 MiB/s)
append: ro root=UUID=e4d55603-4823-4fb7-ab52-46f2e9fcaae1 selinux=off
Retrieving file:
/dtb-4.14.28-201.el7.centos.armv7hl/sun8i-a83t-cubietruck-plus.dtb
6627840 bytes read in 682 ms (9.3 MiB/s)
append: ro root=UUID=e4d55603-4823-4fb7-ab52-46f2e9fcaae1 selinux=off
Retrieving file:
/dtb-4.14.28-201.el7.centos.armv7hl/sun8i-a83t-cubietruck-plus.dtb
10902 bytes read in 586 ms (17.6 KiB/s)
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Ramdisk to 4774f000, end 49fff65f ... OK
Loading Device Tree to 47749000, end 4774ea95 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.28-201.el7.centos.armv7hl
(mockbuild at armhfp-02.bsys.centos.org) (gcc version 4.8.5 20150623 (Red
Hat 4.8.5-16) (GCC)) #1 SMP Mon Mar 19 20:25:46 UTC 2018
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck Plus
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
snip
Welcome to CentOS Linux 7 (Core) dracut-033-535.el7 (Initramfs)!
[ 5.950324] systemd[1]: No hostname configured.
[ 5.954983] systemd[1]: Set hostname to <localhost>.
[ 5.960338] systemd[1]: Initializing machine ID from random
generator.
[ OK ] Reached target Swap.
[ 6.310341] systemd[1]: Reached target Swap.
[ 6.314834] systemd[1]: Starting Swap.
[ OK ] Created slice Root Slice.
[ 6.326288] systemd[1]: Created slice Root Slice.
[ 6.331225] systemd[1]: Starting Root Slice.
[ OK ] Listening on Journal Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Reached target Timers.
[ OK ] Created slice System Slice.
Starting Create list of required st... nodes for the current
kernel...
Starting Journal Service...
Starting Apply Kernel Variables...
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Slices.
[ OK ] Reached target Sockets.
Starting Setup Virtual Console...
[ OK ] Reached target Local File Systems.
Starting dracut cmdline hook...
[ OK ] Started Create list of required sta...ce nodes for the current
kernel.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Setup Virtual Console.
Starting Create Static Device Nodes in /dev...
[ OK ] Started Journal Service.
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started dracut cmdline hook.
Starting dracut pre-udev hook...
[ OK ] Started dracut pre-udev hook.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting udev Coldplug all Devices...
[ OK ] Started udev Coldplug all Devices.
Starting Show Plymouth Boot Screen...
[ OK ] Reached target System Initialization.
Starting dracut initqueue hook...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Reached target Paths.
[ OK ] Reached target Basic System.
Mounting Configuration File System...
[ OK ] Mounted Configuration File System.
[ 9.258492] ehci-platform: EHCI generic platform driver
[ 9.310921] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 9.353339] sunxi-mmc 1c0f000.mmc: base:0xf0b41000 irq:24
[ 9.401563] mmc0: host does not support reading read-only switch,
assuming write-enable
[ 9.409746] sunxi-mmc 1c11000.mmc: base:0xf0b45000 irq:25
[ 9.418906] mmc0: new high speed SDHC card at address 0007
[ 9.488974] mmc1: new DDR MMC card at address 0001
[ 9.710645] mmcblk0: mmc0:0007 SD32G 29.0 GiB
[ 9.720620] mmcblk0: p1 p2 p3 p4
[ 9.731581] mmcblk1: mmc1:0001 NCard 7.30 GiB
[ 9.736734] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB
[ 9.744053] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB
[ 9.754396] mmcblk1: p1 p2
[ OK ] Found device
/dev/disk/by-uuid/e4d55603-4823-4fb7-ab52-46f2e9fcaae1.
[ OK ] Started dracut initqueue hook.
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting File System Check on
/dev/...3-4823-4fb7-ab52-46f2e9fcaae1...
[ OK ] Started File System Check on
/dev/d...603-4823-4fb7-ab52-46f2e9fcaae1.
Mounting /sysroot...
[ 10.483219] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data
mode. Opts: (null)
[ OK ] Mounted /sysroot.
[ OK ] Reached target Initrd Root File System.
Starting Reload Configuration from the Real Root...
[ OK ] Started Reload Configuration from the Real Root.
[ OK ] Reached target Initrd File Systems.
[ OK ] Reached target Initrd Default Target.
Starting dracut pre-pivot and cleanup hook...
[ OK ] Started dracut pre-pivot and cleanup hook.
Starting Cleaning Up and Shutting Down Daemons...
[ OK ] Stopped Cleaning Up and Shutting Down Daemons.
[ OK ] Stopped dracut pre-pivot and cleanup hook.
Stopping dracut pre-pivot and cleanup hook...
[ OK ] Stopped target Initrd Default Target.
[ OK ] Stopped target Basic System.
[ OK ] Stopped target Paths.
[ OK ] Stopped target System Initialization.
Stopping udev Kernel Device Manager...
[ OK ] Stopped target Swap.
[ OK ] Stopped target Slices.
[ OK ] Stopped target Sockets.
[ OK ] Stopped Apply Kernel Variables.
Stopping Apply Kernel Variables...
[ OK ] Stopped target Timers.
[ OK ] Stopped target Local File Systems.
Starting Plymouth switch root service...
[ OK ] Stopped target Remote File Systems.
[ OK ] Stopped target Remote File Systems (Pre).
[ OK ] Stopped dracut initqueue hook.
Stopping dracut initqueue hook...
[ OK ] Stopped udev Coldplug all Devices.
Stopping udev Coldplug all Devices...
[ OK ] Stopped udev Kernel Device Manager.
snip
Welcome to CentOS Linux 7 (Core)!
[ OK ] Stopped Switch Root.
[ OK ] Stopped Journal Service.
Starting Journal Service...
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Created slice
system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice.
[ OK ] Set up automount Arbitrary Executab...ats File System Automount
Point.
Mounting Debug File System...
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Stopped target Switch Root.
[ OK ] Stopped target Initrd File Systems.
[ OK ] Stopped target Initrd Root File System.
[ OK ] Stopped File System Check on Root Device.
Stopping File System Check on Root Device...
[ OK ] Listening on udev Kernel Socket.
[ OK ] Created slice system-getty.slice.
Starting Read and set NIS domainname from
/etc/sysconfig/network...
Starting Collect Read-Ahead Data...
[ OK ] Listening on Delayed Shutdown Socket.
Mounting POSIX Message Queue File System...
[ OK ] Created slice User and Session Slice.
[ OK ] Reached target Slices.
[ OK ] Reached target Remote File Systems.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ OK ] Listening on udev Control Socket.
Starting Create list of required st... nodes for the current
kernel...
[ OK ] Reached target Paths.
Starting Replay Read-Ahead Data...
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Debug File System.
[ OK ] Started Journal Service.
[ OK ] Started Collect Read-Ahead Data.
[ OK ] Started Replay Read-Ahead Data.
[ OK ] Started Read and set NIS domainname from
/etc/sysconfig/network.
[ OK ] Started Create list of required sta...ce nodes for the current
kernel.
Starting Remount Root and Kernel File Systems...
Starting Create Static Device Nodes in /dev...
Starting Apply Kernel Variables...
[ 17.296550] EXT4-fs (mmcblk0p4): re-mounted. Opts: (null)
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Remount Root and Kernel File Systems.
Starting udev Coldplug all Devices...
Starting Load/Save Random Seed...
Starting Configure read-only root support...
Starting Flush Journal to Persistent Storage...
[ OK ] Started Create Static Device Nodes in /dev.
[ OK ] Started Load/Save Random Seed.
[ 17.818547] systemd-journald[427]: Received request to flush runtime
journal from PID 1
[ OK ] Reached target Local File Systems (Pre).
Starting udev Kernel Device Manager...
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started Configure read-only root support.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started udev Coldplug all Devices.
[ 19.146181] cpu cpu0: failed to get clock: -2
[ 19.218261] cpufreq-dt: probe of cpufreq-dt failed with error -2
[ 19.708227] ehci-platform 1c1a000.usb: EHCI Host Controller
[ 19.721852] ehci-platform 1c1a000.usb: new USB bus registered,
assigned bus number 1
[ 19.740546] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000
[ 19.762241] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[ 19.775259] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 19.782236] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 19.789508] usb usb1: Product: EHCI Host Controller
[ 19.794416] usb usb1: Manufacturer: Linux
4.14.28-201.el7.centos.armv7hl ehci_hcd
[ 19.801926] usb usb1: SerialNumber: 1c1a000.usb
[ 19.844670] hub 1-0:1.0: USB hub found
[ 19.854212] hub 1-0:1.0: 1 port detected
[ 19.868545] ehci-platform 1c1b000.usb: EHCI Host Controller
[ 19.882930] ehci-platform 1c1b000.usb: new USB bus registered,
assigned bus number 2
[ 19.901798] ehci-platform 1c1b000.usb: irq 27, io mem 0x01c1b000
[ 19.923267] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[ 19.936351] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
[ 19.943225] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 19.950493] usb usb2: Product: EHCI Host Controller
[ 19.955399] usb usb2: Manufacturer: Linux
4.14.28-201.el7.centos.armv7hl ehci_hcd
[ 19.962907] usb usb2: SerialNumber: 1c1b000.usb
[ 20.008450] hub 2-0:1.0: USB hub found
[ 20.019233] hub 2-0:1.0: 1 port detected
[ OK ] Found device /dev/ttyS0.
[ 20.253371] usb 1-1: new high-speed USB device number 2 using
ehci-platform
[ 20.304553] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16
sec, nowayout=0)
[ 20.350267] usb 2-1: new high-speed USB device number 2 using
ehci-platform
[ 20.397887] usb 1-1: New USB device found, idVendor=05e3,
idProduct=0718
[ 20.404808] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=2
[ 20.412007] usb 1-1: Product: USB Storage
[ 20.416058] usb 1-1: SerialNumber: 000000000033
[ 20.440034] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
[ 20.492897] usb 2-1: New USB device found, idVendor=0424,
idProduct=3503
[ 20.499823] usb 2-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 20.523676] hub 2-1:1.0: USB hub found
[ 20.535200] hub 2-1:1.0: 2 ports detected
[ 20.626373] usb3503 usb-hub: Ports disabled with no control interface
[ OK ] Found device /dev/disk/by-uuid/2CA3-F2A2.
[ 20.760223] usb3503 usb-hub: switched to HUB mode
[ 20.765030] usb3503 usb-hub: usb3503_probe: probed in hub mode
[ OK ] Found device
/dev/disk/by-uuid/13ad9f52-e2ca-4fd1-83d6-7b0af86a85df.
Mounting /boot...
[ 20.966073] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to
feature incompatibilities
[FAILED] Failed to mount /boot.
See 'systemctl status boot.mount' for details.
[DEPEND] Dependency failed for Local File Systems.
[DEPEND] Dependency failed for Relabel all filesystems, if necessary.
[DEPEND] Dependency failed for Migrate local... structure to the new
structure.
[DEPEND] Dependency failed for /boot/fw.
[ OK ] Reached target Timers.
[ OK ] Reached target Network (Pre).
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
[ OK ] Reached target Login Prompts.
Starting Crash recovery kernel arming...
[ OK ] Reached target Sockets.
Starting Import network configuration from initramfs...
Starting Tell Plymouth To Write Out Runtime Data...
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ OK ] Found device
/dev/disk/by-uuid/13b9fbb1-f4bd-4db2-86d8-a802ceb87618.
Activating swap
/dev/disk/by-uuid/1...1-f4bd-4db2-86d8-a802ceb87618...
[ 21.646852] Adding 249852k swap on /dev/mmcblk0p3. Priority:-2
extents:1 across:249852k SSFS
[ OK ] Activated swap
/dev/disk/by-uuid/13b9fbb1-f4bd-4db2-86d8-a802ceb87618.
[ OK ] Reached target Swap.
[FAILED] Failed to start Crash recovery kernel arming.
See 'systemctl status kdump.service' for details.
[ OK ] Started Import network configuration from initramfs.
[ OK ] Started Emergency Shell.
Starting Emergency Shell...
[ OK ] Reached target Emergency Mode.
Starting Create Volatile Files and Directories...
[ 23.733719] random: crng init done
[ 25.605825] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP813 found
[ OK ] Started Create Volatile Files and Directories.
Starting Security Auditing Service...
[ 25.816033] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[ OK ] Started Security Auditing Service.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Welcome to emergency mode! After logging in, type "journalctl -xPress
enter for maintenance(or type Control-D to continue): [ 26.911598]
input: axp20x-pek as
/devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0
[ 27.082356] ac100-rtc ac100-rtc: rtc core: registered rtc-ac100 as
rtc0
[ 27.163368] ac100-rtc ac100-rtc: RTC enabled
[ 27.272882] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 27.317836] scsi host0: usb-storage 1-1:1.0
[ 27.372202] usbcore: registered new interface driver usb-storage
[ 27.510019] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif
mapping ok
[ 27.516919] asoc-simple-card sound: ASoC: no DMI vendor name!
[ 27.540329] usbcore: registered new interface driver uas
sulogin: failed to execute /bin/bash: Permission denied
sulogin: failed to execute /bin/sh: Permission denied
Can not execute su shell
Error getting authority: Error initializing authority: Could not
connect: No such file or directory (g-io-error-quark, 1)
[ 31.615654] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to
feature incompatibilities
Welcome to emergency mode! After logging in, type "journalctl -xPress
enter for maintenance(or type Control-D to continue):
sulogin: failed to execute /bin/bash: Permission denied
sulogin: failed to execute /bin/sh: Permission denied
Can not execute su shell
More information about the Arm-dev
mailing list