Am 10.08.2018 um 14:36 schrieb Robert Moskowitz: > > > On 08/10/2018 08:17 AM, arm_ml at rirasoft.de wrote: >> Am 2018-08-09 17:31, schrieb Robert Moskowitz: >>> On 08/09/2018 11:21 AM, arm_ml at rirasoft.de wrote: >>>> Am 2018-08-09 16:57, schrieb Robert Moskowitz: >>>>> On 08/09/2018 10:31 AM, arm_ml at rirasoft.de wrote: >>>>>> Am 2018-08-09 13:58, schrieb Robert Moskowitz: >>>>>>> On 08/09/2018 07:34 AM, arm_ml at rirasoft.de wrote: >>>>>>>> Am 2018-08-07 12:23, schrieb Pablo Sebastián Greco: >>>>>>>>> <snip> >>>> snip >> >> Wow, I can boot it, but I can't login and can't install the kernel >> from Pablo. Whats next? >> >> >> U-Boot SPL 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) > > Good you got the current uboot. > >> DRAM: 2048 MiB >> Trying to boot from MMC1 >> >> >> U-Boot 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) Allwinner Technology >> >> CPU: Allwinner A83T (SUN8I 1673) >> Model: Cubietech Cubietruck Plus > > Do you have any other arm soc? If you put that cards uboot on, boot > up on that card, install the new kernel, then go back to the > Cubietruck+ uboot, that would work. > > Pablo may know of a simpler method, as I don't do kernel work. I did > work a lot with uboot a couple years ago. Sorry: this didn't work, because this Image didn't boot on my Cubietruck 3. Maybe Pablo has an Idea? > > >> I2C: ready >> DRAM: 2 GiB >> MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 >> Loading Environment from FAT... *** Warning - bad CRC, using default >> environment >> >> Failed (-5) >> In: serial >> Out: serial >> Err: serial >> Net: No ethernet found. >> starting USB... >> USB0: failed to get usb PHY >> Port not available. >> USB1: failed to get usb at 01c1a000 usb PHY >> Port not available. >> USB2: failed to get usb at 01c1b000 usb PHY >> Port not available. >> Hit any key to stop autoboot: 0 >> switch to partitions #0, OK >> mmc0 is current device >> Scanning mmc 0:2... >> Found /extlinux/extlinux.conf >> Retrieving file: /extlinux/extlinux.conf >> 857 bytes read in 16 ms (51.8 KiB/s) >> Ignoring unknown command: ui >> Ignoring malformed menu command: autoboot >> Ignoring malformed menu command: hidden >> Ignoring unknown command: totaltimeout >> CentOS-Userland-7-armv7hl-generic-Minimal-1804 Boot Options. >> 1: CentOS-Userland-7-armv7hl-generic-Minimal-1804 >> (4.14.28-201.el7.centos.armv7hl) >> 2: single >> Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-1804 >> (4.14.28-201.el7.centos.armv7hl) >> Retrieving file: /initramfs-4.14.28-201.el7.centos.armv7hl.img >> 42665567 bytes read in 11495 ms (3.5 MiB/s) >> Retrieving file: /vmlinuz-4.14.28-201.el7.centos.armv7hl >> 6627840 bytes read in 682 ms (9.3 MiB/s) >> append: ro root=UUID=e4d55603-4823-4fb7-ab52-46f2e9fcaae1 selinux=off >> Retrieving file: >> /dtb-4.14.28-201.el7.centos.armv7hl/sun8i-a83t-cubietruck-plus.dtb >> 6627840 bytes read in 682 ms (9.3 MiB/s) >> append: ro root=UUID=e4d55603-4823-4fb7-ab52-46f2e9fcaae1 selinux=off >> Retrieving file: >> /dtb-4.14.28-201.el7.centos.armv7hl/sun8i-a83t-cubietruck-plus.dtb >> 10902 bytes read in 586 ms (17.6 KiB/s) >> ## Flattened Device Tree blob at 43000000 >> Booting using the fdt blob at 0x43000000 >> Loading Ramdisk to 4774f000, end 49fff65f ... OK >> Loading Device Tree to 47749000, end 4774ea95 ... OK >> >> Starting kernel ... >> >> [ 0.000000] Booting Linux on physical CPU 0x0 >> [ 0.000000] Linux version 4.14.28-201.el7.centos.armv7hl >> (mockbuild at armhfp-02.bsys.centos.org) (gcc version 4.8.5 20150623 >> (Red Hat 4.8.5-16) (GCC)) #1 SMP Mon Mar 19 20:25:46 UTC 2018 >> [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), >> cr=10c5387d >> [ 0.000000] CPU: div instructions available: patching division code >> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing >> instruction cache >> [ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck Plus >> [ 0.000000] Memory policy: Data cache writealloc >> [ 0.000000] efi: Getting EFI parameters from FDT: >> [ 0.000000] efi: UEFI not found. >> snip >> Welcome to CentOS Linux 7 (Core) dracut-033-535.el7 (Initramfs)! >> >> [ 5.950324] systemd[1]: No hostname configured. >> [ 5.954983] systemd[1]: Set hostname to <localhost>. >> [ 5.960338] systemd[1]: Initializing machine ID from random >> generator. >> [ OK ] Reached target Swap. >> [ 6.310341] systemd[1]: Reached target Swap. >> [ 6.314834] systemd[1]: Starting Swap. >> [ OK ] Created slice Root Slice. >> [ 6.326288] systemd[1]: Created slice Root Slice. >> [ 6.331225] systemd[1]: Starting Root Slice. >> [ OK ] Listening on Journal Socket. >> [ OK ] Listening on udev Kernel Socket. >> [ OK ] Reached target Timers. >> [ OK ] Created slice System Slice. >> Starting Create list of required st... nodes for the current >> kernel... >> Starting Journal Service... >> Starting Apply Kernel Variables... >> [ OK ] Listening on udev Control Socket. >> [ OK ] Reached target Slices. >> [ OK ] Reached target Sockets. >> Starting Setup Virtual Console... >> [ OK ] Reached target Local File Systems. >> Starting dracut cmdline hook... >> [ OK ] Started Create list of required sta...ce nodes for the >> current kernel. >> [ OK ] Started Apply Kernel Variables. >> [ OK ] Started Setup Virtual Console. >> Starting Create Static Device Nodes in /dev... >> [ OK ] Started Journal Service. >> [ OK ] Started Create Static Device Nodes in /dev. >> [ OK ] Started dracut cmdline hook. >> Starting dracut pre-udev hook... >> [ OK ] Started dracut pre-udev hook. >> Starting udev Kernel Device Manager... >> [ OK ] Started udev Kernel Device Manager. >> Starting udev Coldplug all Devices... >> [ OK ] Started udev Coldplug all Devices. >> Starting Show Plymouth Boot Screen... >> [ OK ] Reached target System Initialization. >> Starting dracut initqueue hook... >> [ OK ] Started Show Plymouth Boot Screen. >> [ OK ] Reached target Paths. >> [ OK ] Reached target Basic System. >> Mounting Configuration File System... >> [ OK ] Mounted Configuration File System. >> [ 9.258492] ehci-platform: EHCI generic platform driver >> [ 9.310921] sunxi-mmc 1c0f000.mmc: Got CD GPIO >> [ 9.353339] sunxi-mmc 1c0f000.mmc: base:0xf0b41000 irq:24 >> [ 9.401563] mmc0: host does not support reading read-only switch, >> assuming write-enable >> [ 9.409746] sunxi-mmc 1c11000.mmc: base:0xf0b45000 irq:25 >> [ 9.418906] mmc0: new high speed SDHC card at address 0007 >> [ 9.488974] mmc1: new DDR MMC card at address 0001 >> [ 9.710645] mmcblk0: mmc0:0007 SD32G 29.0 GiB >> [ 9.720620] mmcblk0: p1 p2 p3 p4 >> [ 9.731581] mmcblk1: mmc1:0001 NCard 7.30 GiB >> [ 9.736734] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB >> [ 9.744053] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB >> [ 9.754396] mmcblk1: p1 p2 >> [ OK ] Found device >> /dev/disk/by-uuid/e4d55603-4823-4fb7-ab52-46f2e9fcaae1. >> [ OK ] Started dracut initqueue hook. >> [ OK ] Reached target Remote File Systems (Pre). >> [ OK ] Reached target Remote File Systems. >> Starting File System Check on >> /dev/...3-4823-4fb7-ab52-46f2e9fcaae1... >> [ OK ] Started File System Check on >> /dev/d...603-4823-4fb7-ab52-46f2e9fcaae1. >> Mounting /sysroot... >> [ 10.483219] EXT4-fs (mmcblk0p4): mounted filesystem with ordered >> data mode. Opts: (null) >> [ OK ] Mounted /sysroot. >> [ OK ] Reached target Initrd Root File System. >> Starting Reload Configuration from the Real Root... >> [ OK ] Started Reload Configuration from the Real Root. >> [ OK ] Reached target Initrd File Systems. >> [ OK ] Reached target Initrd Default Target. >> Starting dracut pre-pivot and cleanup hook... >> [ OK ] Started dracut pre-pivot and cleanup hook. >> Starting Cleaning Up and Shutting Down Daemons... >> [ OK ] Stopped Cleaning Up and Shutting Down Daemons. >> [ OK ] Stopped dracut pre-pivot and cleanup hook. >> Stopping dracut pre-pivot and cleanup hook... >> [ OK ] Stopped target Initrd Default Target. >> [ OK ] Stopped target Basic System. >> [ OK ] Stopped target Paths. >> [ OK ] Stopped target System Initialization. >> Stopping udev Kernel Device Manager... >> [ OK ] Stopped target Swap. >> [ OK ] Stopped target Slices. >> [ OK ] Stopped target Sockets. >> [ OK ] Stopped Apply Kernel Variables. >> Stopping Apply Kernel Variables... >> [ OK ] Stopped target Timers. >> [ OK ] Stopped target Local File Systems. >> Starting Plymouth switch root service... >> [ OK ] Stopped target Remote File Systems. >> [ OK ] Stopped target Remote File Systems (Pre). >> [ OK ] Stopped dracut initqueue hook. >> Stopping dracut initqueue hook... >> [ OK ] Stopped udev Coldplug all Devices. >> Stopping udev Coldplug all Devices... >> [ OK ] Stopped udev Kernel Device Manager. >> snip >> Welcome to CentOS Linux 7 (Core)! >> >> [ OK ] Stopped Switch Root. >> [ OK ] Stopped Journal Service. >> Starting Journal Service... >> [ OK ] Reached target Local Encrypted Volumes. >> [ OK ] Created slice >> system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice. >> [ OK ] Set up automount Arbitrary Executab...ats File System >> Automount Point. >> Mounting Debug File System... >> [ OK ] Listening on /dev/initctl Compatibility Named Pipe. >> [ OK ] Stopped target Switch Root. >> [ OK ] Stopped target Initrd File Systems. >> [ OK ] Stopped target Initrd Root File System. >> [ OK ] Stopped File System Check on Root Device. >> Stopping File System Check on Root Device... >> [ OK ] Listening on udev Kernel Socket. >> [ OK ] Created slice system-getty.slice. >> Starting Read and set NIS domainname from >> /etc/sysconfig/network... >> Starting Collect Read-Ahead Data... >> [ OK ] Listening on Delayed Shutdown Socket. >> Mounting POSIX Message Queue File System... >> [ OK ] Created slice User and Session Slice. >> [ OK ] Reached target Slices. >> [ OK ] Reached target Remote File Systems. >> [ OK ] Created slice system-serial\x2dgetty.slice. >> [ OK ] Listening on udev Control Socket. >> Starting Create list of required st... nodes for the current >> kernel... >> [ OK ] Reached target Paths. >> Starting Replay Read-Ahead Data... >> [ OK ] Mounted POSIX Message Queue File System. >> [ OK ] Mounted Debug File System. >> [ OK ] Started Journal Service. >> [ OK ] Started Collect Read-Ahead Data. >> [ OK ] Started Replay Read-Ahead Data. >> [ OK ] Started Read and set NIS domainname from >> /etc/sysconfig/network. >> [ OK ] Started Create list of required sta...ce nodes for the >> current kernel. >> Starting Remount Root and Kernel File Systems... >> Starting Create Static Device Nodes in /dev... >> Starting Apply Kernel Variables... >> [ 17.296550] EXT4-fs (mmcblk0p4): re-mounted. Opts: (null) >> [ OK ] Started Apply Kernel Variables. >> [ OK ] Started Remount Root and Kernel File Systems. >> Starting udev Coldplug all Devices... >> Starting Load/Save Random Seed... >> Starting Configure read-only root support... >> Starting Flush Journal to Persistent Storage... >> [ OK ] Started Create Static Device Nodes in /dev. >> [ OK ] Started Load/Save Random Seed. >> [ 17.818547] systemd-journald[427]: Received request to flush >> runtime journal from PID 1 >> [ OK ] Reached target Local File Systems (Pre). >> Starting udev Kernel Device Manager... >> [ OK ] Started Flush Journal to Persistent Storage. >> [ OK ] Started Configure read-only root support. >> [ OK ] Started udev Kernel Device Manager. >> [ OK ] Started udev Coldplug all Devices. >> [ 19.146181] cpu cpu0: failed to get clock: -2 >> [ 19.218261] cpufreq-dt: probe of cpufreq-dt failed with error -2 >> [ 19.708227] ehci-platform 1c1a000.usb: EHCI Host Controller >> [ 19.721852] ehci-platform 1c1a000.usb: new USB bus registered, >> assigned bus number 1 >> [ 19.740546] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000 >> [ 19.762241] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 >> [ 19.775259] usb usb1: New USB device found, idVendor=1d6b, >> idProduct=0002 >> [ 19.782236] usb usb1: New USB device strings: Mfr=3, Product=2, >> SerialNumber=1 >> [ 19.789508] usb usb1: Product: EHCI Host Controller >> [ 19.794416] usb usb1: Manufacturer: Linux >> 4.14.28-201.el7.centos.armv7hl ehci_hcd >> [ 19.801926] usb usb1: SerialNumber: 1c1a000.usb >> [ 19.844670] hub 1-0:1.0: USB hub found >> [ 19.854212] hub 1-0:1.0: 1 port detected >> [ 19.868545] ehci-platform 1c1b000.usb: EHCI Host Controller >> [ 19.882930] ehci-platform 1c1b000.usb: new USB bus registered, >> assigned bus number 2 >> [ 19.901798] ehci-platform 1c1b000.usb: irq 27, io mem 0x01c1b000 >> [ 19.923267] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 >> [ 19.936351] usb usb2: New USB device found, idVendor=1d6b, >> idProduct=0002 >> [ 19.943225] usb usb2: New USB device strings: Mfr=3, Product=2, >> SerialNumber=1 >> [ 19.950493] usb usb2: Product: EHCI Host Controller >> [ 19.955399] usb usb2: Manufacturer: Linux >> 4.14.28-201.el7.centos.armv7hl ehci_hcd >> [ 19.962907] usb usb2: SerialNumber: 1c1b000.usb >> [ 20.008450] hub 2-0:1.0: USB hub found >> [ 20.019233] hub 2-0:1.0: 1 port detected >> [ OK ] Found device /dev/ttyS0. >> [ 20.253371] usb 1-1: new high-speed USB device number 2 using >> ehci-platform >> [ 20.304553] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled >> (timeout=16 sec, nowayout=0) >> [ 20.350267] usb 2-1: new high-speed USB device number 2 using >> ehci-platform >> [ 20.397887] usb 1-1: New USB device found, idVendor=05e3, >> idProduct=0718 >> [ 20.404808] usb 1-1: New USB device strings: Mfr=0, Product=1, >> SerialNumber=2 >> [ 20.412007] usb 1-1: Product: USB Storage >> [ 20.416058] usb 1-1: SerialNumber: 000000000033 >> [ 20.440034] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz >> [ 20.492897] usb 2-1: New USB device found, idVendor=0424, >> idProduct=3503 >> [ 20.499823] usb 2-1: New USB device strings: Mfr=0, Product=0, >> SerialNumber=0 >> [ 20.523676] hub 2-1:1.0: USB hub found >> [ 20.535200] hub 2-1:1.0: 2 ports detected >> [ 20.626373] usb3503 usb-hub: Ports disabled with no control interface >> [ OK ] Found device /dev/disk/by-uuid/2CA3-F2A2. >> [ 20.760223] usb3503 usb-hub: switched to HUB mode >> [ 20.765030] usb3503 usb-hub: usb3503_probe: probed in hub mode >> [ OK ] Found device >> /dev/disk/by-uuid/13ad9f52-e2ca-4fd1-83d6-7b0af86a85df. >> Mounting /boot... >> [ 20.966073] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to >> feature incompatibilities >> [FAILED] Failed to mount /boot. >> See 'systemctl status boot.mount' for details. >> [DEPEND] Dependency failed for Local File Systems. >> [DEPEND] Dependency failed for Relabel all filesystems, if necessary. >> [DEPEND] Dependency failed for Migrate local... structure to the new >> structure. >> [DEPEND] Dependency failed for /boot/fw. >> [ OK ] Reached target Timers. >> [ OK ] Reached target Network (Pre). >> [ OK ] Reached target Network. >> [ OK ] Reached target Network is Online. >> [ OK ] Reached target Login Prompts. >> Starting Crash recovery kernel arming... >> [ OK ] Reached target Sockets. >> Starting Import network configuration from initramfs... >> Starting Tell Plymouth To Write Out Runtime Data... >> [ OK ] Started Tell Plymouth To Write Out Runtime Data. >> [ OK ] Found device >> /dev/disk/by-uuid/13b9fbb1-f4bd-4db2-86d8-a802ceb87618. >> Activating swap >> /dev/disk/by-uuid/1...1-f4bd-4db2-86d8-a802ceb87618... >> [ 21.646852] Adding 249852k swap on /dev/mmcblk0p3. Priority:-2 >> extents:1 across:249852k SSFS >> [ OK ] Activated swap >> /dev/disk/by-uuid/13b9fbb1-f4bd-4db2-86d8-a802ceb87618. >> [ OK ] Reached target Swap. >> [FAILED] Failed to start Crash recovery kernel arming. >> See 'systemctl status kdump.service' for details. >> [ OK ] Started Import network configuration from initramfs. >> [ OK ] Started Emergency Shell. >> Starting Emergency Shell... >> [ OK ] Reached target Emergency Mode. >> Starting Create Volatile Files and Directories... >> [ 23.733719] random: crng init done >> [ 25.605825] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP813 found >> [ OK ] Started Create Volatile Files and Directories. >> Starting Security Auditing Service... >> [ 25.816033] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded >> [ OK ] Started Security Auditing Service. >> Starting Update UTMP about System Boot/Shutdown... >> [ OK ] Started Update UTMP about System Boot/Shutdown. >> Starting Update UTMP about System Runlevel Changes... >> [ OK ] Started Update UTMP about System Runlevel Changes. >> Welcome to emergency mode! After logging in, type "journalctl -xPress >> enter for maintenance(or type Control-D to continue): [ 26.911598] >> input: axp20x-pek as >> /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0 >> [ 27.082356] ac100-rtc ac100-rtc: rtc core: registered rtc-ac100 as >> rtc0 >> [ 27.163368] ac100-rtc ac100-rtc: RTC enabled >> [ 27.272882] usb-storage 1-1:1.0: USB Mass Storage device detected >> [ 27.317836] scsi host0: usb-storage 1-1:1.0 >> [ 27.372202] usbcore: registered new interface driver usb-storage >> [ 27.510019] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif >> mapping ok >> [ 27.516919] asoc-simple-card sound: ASoC: no DMI vendor name! >> [ 27.540329] usbcore: registered new interface driver uas >> >> sulogin: failed to execute /bin/bash: Permission denied >> sulogin: failed to execute /bin/sh: Permission denied >> Can not execute su shell >> >> Error getting authority: Error initializing authority: Could not >> connect: No such file or directory (g-io-error-quark, 1) >> [ 31.615654] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to >> feature incompatibilities >> Welcome to emergency mode! After logging in, type "journalctl -xPress >> enter for maintenance(or type Control-D to continue): >> sulogin: failed to execute /bin/bash: Permission denied >> sulogin: failed to execute /bin/sh: Permission denied >> Can not execute su shell >> >