[Arm-dev] Instructions for installation on an Odroid HC1

Robert Moskowitz rgm at htt-consult.com
Sun Dec 9 16:25:36 UTC 2018

On 12/9/18 10:45 AM, Pablo Sebastián Greco wrote:
> El 9/12/18 a las 12:30, Robert Moskowitz escribió:
>> Pablo,
>> I see a new 419-1820 and a 419-v26-1810 from yesterday.  I will first 
>> try the v26 as it is newer...
> Correct, both images come from the same ks, but generated with 
> different versions of livecd-tools. Better if you use the v26 version, 
> since it is what we'd like to use in the future.

It failed.  I dd the image to a 16GB uSD and used gparted to grow the 
rootfs partition.  I used hardkernel's script to add the boot loader as 
I did with F29 testing, but used the uboot you have on your image.  Same 
9/18 date, but slightly larger file.  I then appended the boot info with:

sed -i "s|append|& cpuidle.off=1 \
console=tty1 console=ttySAC2,115200n8 \
rd.driver.pre=ledtrig-heartbeat,xhci-plat-hcd no_bL_switcher|" \

Put the card in the odroid-hc1 and got:

U-Boot 2018.09 (Nov 27 2018 - 12:48:09 +0000) for ODROID-XU3/XU4/HC1

CPU:   Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type:  hc1
DRAM:  2 GiB
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
MMC Device 1 not found
no mmc device at slot 1
Card did not respond to voltage select!
switch to partitions #0, OK
mmc2 is current device
Scanning mmc 2:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
727 bytes read in 4 ms (176.8 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command:  autoboot
Ignoring malformed menu command:  hidden
Ignoring unknown command: totaltimeout
CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 Boot Options.
1:    CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 
Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 (
Retrieving file: /initramfs-4.19.7-300.el7.armv7hl.img
47336545 bytes read in 3110 ms (14.5 MiB/s)
Retrieving file: /vmlinuz-4.19.7-300.el7.armv7hl
7127552 bytes read in 475 ms (14.3 MiB/s)
append: cpuidle.off=1 console=tty1 console=ttySAC2,115200n8 
g-heartbeat,xhci-plat-hcd no_bL_switcher ro 
5320ba30b7 rhgb quiet LANG=en_US.UTF-8
Retrieving file: /dtb-4.19.7-300.el7.armv7hl/exynos5422-odroidhc1.dtb
52518 bytes read in 84 ms (610.4 KiB/s)
Kernel image @ 0x42000000 [ 0x000000 - 0x6cc200 ]
## Flattened Device Tree blob at 43000000
    Booting using the fdt blob at 0x43000000
    Loading Ramdisk to 4d2db000, end 4ffffc61 ... OK
    Loading Device Tree to 4d2cb000, end 4d2dad25 ... OK

Starting kernel ...

[  OK  ] Started Show Plymouth Boot Screen.
[  OK  ] Reached target Paths.
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[  OK  ] Reached target Basic System.
          Mounting Configuration File System...
[  OK  ] Mounted Configuration File System.
[  148.500221] dracut-initqueue[482]: Warning: dracut-initqueue timeout 
- star
ting timeout scripts
[  149.116935] dracut-initqueue[482]: Warning: dracut-initqueue timeout 
- starti
ng timeout scripts
[  149.688854] dracut-initqueue[482]: Warning: dracut-initqueue timeout 
- starti
ng timeout scripts
[  150.259929] dracut-initqueue[482]: Warning: dracut-initqueue timeout 
- starti
ng timeout scripts
[  150.831854] dracut-initqueue[482]: Warning: dracut-initqueue timeout 
- starti
ng timeout scripts

....  snip

[  216.440176] dracut-initqueue[4Warning: 
6d8-005320ba30b7 does not exist

Generating "/run/initramfs/rdsosreport.txt"

Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick 
or /boot
after mounting them and attach it to a bug report.


Now what?


More information about the Arm-dev mailing list