[Arm-dev] Instructions for installation on an Odroid HC1

Thu Dec 6 17:37:19 UTC 2018
Robert Moskowitz <rgm at htt-consult.com>

Pablo,

On 12/6/18 12:15 PM, Pablo Sebastián Greco wrote:
>
> Robert, you're right, I just mounted the 4.19 test image and /boot is 
> a mess.
> I'll try to solve that and get back to you.
>
> In the meantime, you could fix the image by moving the components to 
> their right name.
>

That means I know what to move were.  Not likely to be right...

Robert

>
> Pablo.
>
> El 6/12/18 a las 13:52, Robert Moskowitz escribió:
>>
>>
>> On 12/6/18 11:22 AM, Robert Moskowitz wrote:
>>> Pablo,
>>>
>>> I have been busy on the Fedora-arm list getting F29 working on the 
>>> Odroid-HC1.  I figured if I could get F29 working, I could port that 
>>> knowledge over to Centos-arm.  More on what I accomplished later...
>>>
>>> I grabbed this image, dropped it on a uSD, did the various needed 
>>> steps and tried to boot.  It failed because there is nothing really 
>>> in /boot!
>>>
>>> ==============
>>
>> BTW, an mostly empty /boot is the same problem I was up against with 
>> F30 rawhide RC5 minimal.  RC5 Server had the files, but has an 
>> SELinux bug, so I fell back to working with F29.
>>
>>>
>>>
>>> U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1
>>>
>>> CPU:   Exynos5422 @ 800 MHz
>>> Model: Odroid XU3 based on EXYNOS5422
>>> Board: Odroid XU3 based on EXYNOS5422
>>> Type:  hc1
>>> DRAM:  2 GiB
>>> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
>>> Loading Environment from MMC... Card did not respond to voltage select!
>>> *** Warning - No block device, using default environment
>>>
>>> In:    serial
>>> Out:   serial
>>> Err:   serial
>>> Net:   No ethernet found.
>>> Hit any key to stop autoboot:  0
>>> MMC Device 1 not found
>>> no mmc device at slot 1
>>> Card did not respond to voltage select!
>>> switch to partitions #0, OK
>>> mmc2 is current device
>>> Scanning mmc 2:2...
>>> Found /extlinux/extlinux.conf
>>> Retrieving file: /extlinux/extlinux.conf
>>> 685 bytes read in 4 ms (167 KiB/s)
>>> Ignoring unknown command: ui
>>> Ignoring malformed menu command:  autoboot
>>> Ignoring malformed menu command:  hidden
>>> Ignoring unknown command: totaltimeout
>>> CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options.
>>> 1:    CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 
>>> (4.19.5-300.el7.armv7
>>> hl)
>>> Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 
>>> (4.19
>>> .5-300.el7.armv7hl)
>>> Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img
>>> ** File not found /initrd-4.19.5-300.el7.armv7hl.img **
>>> Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 
>>> (4.19.5-300.el7.armv
>>> 7hl) for failure retrieving initrd
>>> SCRIPT FAILED: continuing...
>>> starting USB...
>>> USB0:   USB EHCI 1.00
>>> USB1:   Register 2000140 NbrPorts 2
>>> Starting the controller
>>> USB XHCI 1.00
>>>
>>> ======================
>>>
>>> no initrd for starters...
>>>
>>> Bob
>>>
>>> On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote:
>>>>
>>>> Robert, I didn't want to send this to the list, but the image that 
>>>> will appear on the mirrors are temporarily hosted here 
>>>> https://armv7.dev.centos.org/repos/images/.
>>>>
>>>> You'll see that there is a generic-419, it is a test image I built 
>>>> (never had time to test myself), that comes with kernel 4.19 
>>>> instead of 4.14, so it can be used with newer devices.
>>>>
>>>> Let me know how it goes..... :)
>>>>
>>>> Pablo.
>>>>
>>>> El 2/12/18 a las 22:59, Robert Moskowitz escribió:
>>>>> The power supply and serial connection came today, so now to build 
>>>>> my first image.
>>>>>
>>>>> I see that we are still on the 1804 images, and seem to recall 
>>>>> that there was work to do to get that working.
>>>>>
>>>>> Can someone give me the current recommended installation steps?
>>>>>
>>>>> I would prefer that all partitions are on the sata drive, only 
>>>>> uboot on the uSD.
>>>>>
>>>>> thanks.
>>>>>
>>>>> _______________________________________________
>>>>> Arm-dev mailing list
>>>>> Arm-dev at centos.org
>>>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>>
>>>
>>> _______________________________________________
>>> Arm-dev mailing list
>>> Arm-dev at centos.org
>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>
>>
>> _______________________________________________
>> Arm-dev mailing list
>> Arm-dev at centos.org
>> https://lists.centos.org/mailman/listinfo/arm-dev
>
> _______________________________________________
> Arm-dev mailing list
> Arm-dev at centos.org
> https://lists.centos.org/mailman/listinfo/arm-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20181206/d13e53a5/attachment-0006.html>