Pablo, I see a new 419-1820 and a 419-v26-1810 from yesterday. I will first try the v26 as it is newer... Robert On 12/7/18 4:30 PM, Pablo Sebastián Greco wrote: > > > El 6/12/18 a las 14:37, Robert Moskowitz escribió: >> Pablo, >> >> On 12/6/18 12:15 PM, Pablo Sebastián Greco wrote: >>> >>> Robert, you're right, I just mounted the 4.19 test image and /boot >>> is a mess. >>> I'll try to solve that and get back to you. >>> >>> In the meantime, you could fix the image by moving the components to >>> their right name. >>> >> >> That means I know what to move were. Not likely to be right... > Robert, found the problem, and there should be a new version of the > image with /boot corrected in about 1 hour. > Please keep in mind that this version still uses kernel 4.19.5, which > suffers from the big blk-dev/ext4 bug, so it is just to test. I'll be > building a newer 4.19.x soon > > Pablo. >> >> Robert >> >>> >>> Pablo. >>> >>> El 6/12/18 a las 13:52, Robert Moskowitz escribió: >>>> >>>> >>>> On 12/6/18 11:22 AM, Robert Moskowitz wrote: >>>>> Pablo, >>>>> >>>>> I have been busy on the Fedora-arm list getting F29 working on the >>>>> Odroid-HC1. I figured if I could get F29 working, I could port >>>>> that knowledge over to Centos-arm. More on what I accomplished >>>>> later... >>>>> >>>>> I grabbed this image, dropped it on a uSD, did the various needed >>>>> steps and tried to boot. It failed because there is nothing >>>>> really in /boot! >>>>> >>>>> ============== >>>> >>>> BTW, an mostly empty /boot is the same problem I was up against >>>> with F30 rawhide RC5 minimal. RC5 Server had the files, but has an >>>> SELinux bug, so I fell back to working with F29. >>>> >>>>> >>>>> >>>>> U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1 >>>>> >>>>> CPU: Exynos5422 @ 800 MHz >>>>> Model: Odroid XU3 based on EXYNOS5422 >>>>> Board: Odroid XU3 based on EXYNOS5422 >>>>> Type: hc1 >>>>> DRAM: 2 GiB >>>>> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2 >>>>> Loading Environment from MMC... Card did not respond to voltage >>>>> select! >>>>> *** Warning - No block device, using default environment >>>>> >>>>> In: serial >>>>> Out: serial >>>>> Err: serial >>>>> Net: No ethernet found. >>>>> Hit any key to stop autoboot: 0 >>>>> MMC Device 1 not found >>>>> no mmc device at slot 1 >>>>> Card did not respond to voltage select! >>>>> switch to partitions #0, OK >>>>> mmc2 is current device >>>>> Scanning mmc 2:2... >>>>> Found /extlinux/extlinux.conf >>>>> Retrieving file: /extlinux/extlinux.conf >>>>> 685 bytes read in 4 ms (167 KiB/s) >>>>> Ignoring unknown command: ui >>>>> Ignoring malformed menu command: autoboot >>>>> Ignoring malformed menu command: hidden >>>>> Ignoring unknown command: totaltimeout >>>>> CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options. >>>>> 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 >>>>> (4.19.5-300.el7.armv7 >>>>> hl) >>>>> Enter choice: 1: >>>>> CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19 >>>>> .5-300.el7.armv7hl) >>>>> Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img >>>>> ** File not found /initrd-4.19.5-300.el7.armv7hl.img ** >>>>> Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 >>>>> (4.19.5-300.el7.armv >>>>> 7hl) for failure retrieving initrd >>>>> SCRIPT FAILED: continuing... >>>>> starting USB... >>>>> USB0: USB EHCI 1.00 >>>>> USB1: Register 2000140 NbrPorts 2 >>>>> Starting the controller >>>>> USB XHCI 1.00 >>>>> >>>>> ====================== >>>>> >>>>> no initrd for starters... >>>>> >>>>> Bob >>>>> >>>>> On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote: >>>>>> >>>>>> Robert, I didn't want to send this to the list, but the image >>>>>> that will appear on the mirrors are temporarily hosted here >>>>>> https://armv7.dev.centos.org/repos/images/. >>>>>> >>>>>> You'll see that there is a generic-419, it is a test image I >>>>>> built (never had time to test myself), that comes with kernel >>>>>> 4.19 instead of 4.14, so it can be used with newer devices. >>>>>> >>>>>> Let me know how it goes..... :) >>>>>> >>>>>> Pablo. >>>>>> >>>>>> El 2/12/18 a las 22:59, Robert Moskowitz escribió: >>>>>>> The power supply and serial connection came today, so now to >>>>>>> build my first image. >>>>>>> >>>>>>> I see that we are still on the 1804 images, and seem to recall >>>>>>> that there was work to do to get that working. >>>>>>> >>>>>>> Can someone give me the current recommended installation steps? >>>>>>> >>>>>>> I would prefer that all partitions are on the sata drive, only >>>>>>> uboot on the uSD. >>>>>>> >>>>>>> thanks. >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Arm-dev mailing list >>>>>>> Arm-dev at centos.org >>>>>>> https://lists.centos.org/mailman/listinfo/arm-dev >>>>> >>>>> >>>>> _______________________________________________ >>>>> Arm-dev mailing list >>>>> Arm-dev at centos.org >>>>> https://lists.centos.org/mailman/listinfo/arm-dev >>>> >>>> >>>> _______________________________________________ >>>> Arm-dev mailing list >>>> Arm-dev at centos.org >>>> https://lists.centos.org/mailman/listinfo/arm-dev >>> >>> _______________________________________________ >>> Arm-dev mailing list >>> Arm-dev at centos.org >>> https://lists.centos.org/mailman/listinfo/arm-dev >> > > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > https://lists.centos.org/mailman/listinfo/arm-dev -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20181209/2d611c0c/attachment-0006.html>